Listening To Audio From A Connected Component - Sony MHC-GX555 Operating Instructions Manual

To enhance your system, you can connect optional componems. Refbr to the operating instractions
provided with each component. A North American model is used R)r illustration purpose.
Optional analog component /
1
From the audio output jack of an
optional analog component
[] AUDIO IN jack
Use audio cord (not supplied) to connect an
optional analog component (Portable Audio
Player, etc.) to this .jack. You can then record or
listen to the sound from the component through
this system.
Note
Bcl\)rc connecting or discennccting the radio cord
(not supplied), press VOLUME repeatedly (er turn
the VOLUME control on the unit ceutercleckwise) to
turn dox_nthe ve]ul//e.
Listening to audio from a
connected component
1
Connect the audio cord (not supplied). See
"Hooking up optional components".
2 Press FUNCTION repeatedly (or AUDIO IN
on the unit) until "AUDIO IN" appears,
3 Start playing the connected component.
Recording audio from
connected component
1 Connect the audio cord (not supplied).
2 Start recording manually. See "Recording
on a tape manually" on page 18.
Notes
• If the cennccted component has the AVLS
(Automatic Velume Limiter System) functien, be
sure to turn off Ihe fimctien when using the AUDIO
IN. Otherx_ise, you will have to turn up the volume
of the speaker, and that may cause distellien.
• If the connected component has the BASS BOOST
or MEGA BASS function, be sure to turn off the
fimction when using the AUDIO IN. Otherwise, the
sound frem the speaker may be disterled.
O
O
O
3
o
27 GB