Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for DeWalt XR DCD100
Summary of Contents for DeWalt XR DCD100
- Page 1 DCD100 DCD100Y...
- Page 2 English (original instructions) Copyright D WALT...
- Page 3 Fig. A Fig. B...
- Page 4 Fig. C Fig. D Fig. E Fig. F...
-
Page 5: Technical Data
English 18V MAX* COMPACT 13 MM DRILL/DRIVER/HAMMER DRILL DCD100, DCD100Y Congratulations! noise emission may differ. This may significantly increase the exposure level over the total working period. You have chosen a D WALT tool. Years of experience, thorough An estimation of the level of exposure to vibration and/or product development and innovation make D WALT one of the noise should also take into account the times when the tool is... -
Page 6: Definitions: Safety Guidelines
English Batteries Chargers/Charge Times (Minutes)*** DCB112/ DCB115/ Weight (kg) DCB104 DCB107 DCB113 DCB116 DCB117 DCB118 DCB132 DCB119 Cat # DCB1102 DCB1104 DCB546 18/54 6.0/2.0 1.08 DCB547/G 18/54 9.0/3.0 1.46 135* 110* 135* DCB548 18/54 12.0/4.0 1.46 DCB549 18/54 15.0/5.0 2.12 DCB181 0.35 DCB182... -
Page 7: Personal Safety
English 4) Power Tool Use and Care Unmodified plugs and matching outlets will reduce risk of electric shock. a ) Do not force the power tool. Use the correct power b ) Avoid body contact with earthed or grounded tool for your application. The correct power tool surfaces, such as pipes, radiators, ranges and will do the job better and safer at the rate for which it refrigerators. -
Page 8: Important Safety Instructions For All Battery Chargers
English Do not operate this tool for long periods of time. unpredictable behaviour resulting in fire, explosion or risk • of injury. Vibration caused by hammer action may be harmful to your f ) Do not expose a battery pack or tool to fire or hands and arms. - Page 9 English • Before using charger, read all instructions and cautionary Disconnect the charger from the outlet before • markings on charger, battery pack, and product using attempting any cleaning. This will reduce the risk of battery pack. electric shock. Removing the battery pack will not reduce WARNING: Shock hazard.
-
Page 10: Wall Mounting
English Never force battery pack into charger. Do not modify charging until the battery pack has reached an appropriate • battery pack in any way to fit into a non‑compatible temperature. The charger then automatically switches to the charger as battery pack may rupture, causing serious pack charging mode. - Page 11 English include UN Recommendations on the Transport of Dangerous battery performance and life, store battery packs at room Goods; International Air Transport Association (IATA) Dangerous temperature when not in use. Do not store batteries at Goods Regulations; International Maritime Dangerous Goods temperatures exceeding 40°C (104 ˚F).
-
Page 12: Intended Use
English Date code position Battery Type Fuel gauge button These battery packs may be used: , DCB181, DCB182, DCB183, Intended Use DCB183B, DCB183G, DCB184, DCB184B, DCB184G, DCB185, DCB187, DCB189, DCBP034, DCBP034G, DCBP518, DCBP518G, These hammerdrills are designed for professional drilling, DCB546, DCB547, DCB547G, DCB548, DCB549. -
Page 13: Operation
English Installing a Bit or Accessory into a Keyless Mode Selection (Fig. A, D) Chuck (Fig. C) The mode selection collar 6 can be used to select the correct operating mode depending upon the planned application. WARNING: Do not attempt to tighten drill bits (or To select, rotate the collar until the desired symbol aligns with any other accessory) by gripping the front part of the the arrow. -
Page 14: Maintenance
English Performing an Application (Fig. A) DO nOT DEPREss TRiggER sWiTCh On AnD OFF ‑ in An ATTEMPT TO sTART A sTAllED DRill—This WARNING: To reduce the risk of personal injury, CAn DAMAgE ThE DRill. ALWAYS ensure workpiece is anchored or clamped firmly. To minimize stalling or breaking through the material, ‑... -
Page 15: Optional Accessories
English Use a cloth dampened only with water and mild soap. Never let any liquid get inside the tool; never immerse any part of the tool into a liquid. Ventilation slots can be cleaned using a dry, soft non-metallic brush and/or a suitable vacuum cleaner. Do not use water or any cleaning solutions. - Page 16 Belgique et WALT - Belgium BVBA Tel: NL 32 15 47 37 63 www.dewalt.be Luxembourg België en Luxemburg enduser.BE@SBDinc.com Egide Walschaertsstraat 16 Tel: FR 32 15 47 37 64 2800 Mechelen Fax: 32 15 47 37 99 Danmark WALT (Stanley Black&Decker AS)