Redragon K628 RGB POLLUX PRO - 3-Mode Wireless Gaming Keyboard Manual

OS Support

WinXP/Vista/Win7/Win8/Win10

How to connect the keyboard with a computer

Wired Connection

1. Slide the 2.4G/OFF/BT switch on bottom of keyboard to OFF.
2. Take out the USB A to USB Type C cable in the package and connect the keyboard with your computer.
3. The computer will recognize and configure the keyboard automatically.
4. The keyboard will be ready for use when the configuration is finished.
5. Once the keyboard is powered up, charging begins. The LED marked with M light is in white.

2.4G Wireless Connection

1. Slide the 2.4G/OFF/BT switch on bottom of keyboard to 2.4G.
2. Take out the nano USB receiver and plug it into an available USB port on your computer. The computer will recognize and configure the keyboard automatically.
3. The keyboard will be ready for use when the configuration is finished.
4. In some cases, you may need to pair the keyboard. Turn on the keyboard and press [FN]+[2.4G] for about 3 seconds, the LED marked with M flashes in yellow, plug the USB receiver into any available USB port on your computer within 20 seconds. The keyboard will be paired automatically. Make sure the keyboard has enough power before doing so.
5. The indicator will flash when the battery is low. Please recharge the keyboard in time or it will turn off automatically soon.

Bluetooth Connection

1. Slide the 2.4G/OFF/BT switch on bottom of keyboard to BT.
2. Press [FN]+[BT1] (or [BT2]/[BT3] for other Bluetooth devices), the LED marked with M flashes in blue (or cyan/Purple for the others)
3. Turn on Bluetooth and scan for available devices on your computer or smart phone. It will find "BT3.0KB or BT5.0 KB" device. Select it and it will connect automatically.

Function Introduction

1. With standard USB and 2.4G/BT connections, the keyboard can be used on computers without any software or driver installation.
2. There are 20 backlight effects: FN+"R_Alt" key (marked M on the key)
3. Commands of key combinations with [FN] key
   [FN+ESC]: ' ~
   [FN+1]: F1
   [FN+2]: F2
   [FN+3]: F3
   [FN+4]: F4
   [FN+5]: F5
   [FN+6]: F6
   [FN+71: F7
   [FN+8]: F8
   [FN+9]: F9
   [FN+0]: F10
   [FN+"-_"]: F11
   [FN+"=+"1: F12
   [FN] + [Win]-L: Disable or enable the [Win] key.
   [FN] + [Q]: Select Bluetooth device one (for Bluetooth connection).
   [FN] + [W]: Select Bluetooth device two (for Bluetooth connection).
   [FN] + [E]: Select Bluetooth device three (for Bluetooth connection).
   [FN] + [R]: Change to 2.4G wireless connection. Press and hold the [FN]+[4] for 3 seconds to pair the keyboard with its receiver.
   FN+P=PRTSC
   FN+{[=SCRLK
   FN+]}=PAUSE
   FN+L=INS
   FN+;:=HOME
   FN+"=END
   FN+,<=DEL
   FN+.>=PGUP
   FN+/?=PGDN
   FN+R_CTRL=APP
   FN+ R_ALT: Switch in 20 backlighting patterns
   FN + TAB: Set the keyboard to default setting.
   FN+Caps: All key in white color by one click
   FN+SPACE: Change backlight color.
   FN+ ↑/↓: Decrease/increase the backlight brightness, total 5 levels.
   FN+ ←/→: Change light running speed, total 5 levels.
   FN+Backspace: Turn ON/OFF the backlight

How to charge keyboard

Find the USB A to USB type C cable in the packaging, plug the keyboard and connect it with computer for charging, the LED indicator of keyboard will be turn to red.
Remark: The LED indicator will be turn to red when keyboard is out of battery.

Indicators on the top left of the keyboard

"A" is for Captals lock indication
"M" is for Mode & Charging status indication

FAQ

1. If the keyboard doesn't respond, please check if the keyboards USB cable is correctly inserted into the corresponding USB port on the computer, or try another USB port on the computer.
2. If you spill liquid on the keyboard, please unplug the keyboards USB cable from the computer immediately. Wipe off excess liquid and put the keyboard in a dry and ventilated place. Make sure the keyboard is dried naturally before the next use END!