Getting Started This chapter provides you with the information on hardware setup procedures. While connecting devices, be careful in holding the devices and use a grounded wrist strap to avoid static electricity. Package Contents Monitor MAG 341CQP QD-OLED Documentation Quick Start Guide Stand Stand Base with Screw(s) Accessories...
Installing the Monitor Stand 1. Leave the monitor in its protective packaging. Align the stand to the monitor groove. 2. Push the stand towards the monitor groove until it locks in place. 3. Connect the base to the stand and tighten the base screws to secure the base. 4.
Adjusting the Monitor This monitor is designed to maximize your viewing comfort with its adjustment capabilities. ⚠ Important Avoid touching the display panel when adjusting the monitor. ∙ -5° 20° 100mm 30° 30°...
Page 7
Power LED Lit in white after the monitor is turned on. If no signal input, the LED will turn into orange. Lit in orange when the monitor is in Stand-by mode. Power Jack Macro Key To activate OSD Application. Navi Key Power Button HDMI™...
Connecting the Monitor to PC 1. Turn off your computer. 2. Connect the video cable from the monitor to your computer. 3. Connect the power cord to the monitor power jack. (Figure A) 4. Plug the power cord into the electrical outlet. (Figure B) 5.
OSD Setup This chapter provides you with essential information on OSD Setup. ⚠ Important All information is subject to change without prior notice. Navi Key The monitor comes with a Navi Key, a multi-directional control that helps navigate the On-Screen Display (OSD) menu. Up/Down/Left/Right: ∙...
OSD Menus ⚠ Important The following settings will be grayed out when HDR signals are received: Night Vision Color Temperature ∙ ∙ Low Blue Light Optix Scope ∙ ∙ Brightness PIP/PBP ∙ ∙ Contrast ∙...
Page 11
G.I. 1st Level Menu 2nd/3rd Level Menu Description Auto ∙ Auto allows the monitor to automatically switch between USB input sources, such as keyboards, Upstream mice or other USB devices. ∙ Users can also designate Upstream port or USB Type C Type-C as the only USB signal source.
Gaming 1st Level Menu 2nd/3rd Level Menu Description Game Mode Premium Color ∙ Use Up or Down Button to select and preview mode effects. User ∙ Press the OK Button to confirm and apply your mode type. Racing Night Vision ∙...
Professional 1st Level Menu 2nd Level Menu Description Pro Mode ∙ Use Up or Down Button to select and preview mode effects. User ∙ Press the OK Button to confirm and apply your mode type. Anti-Blue ∙ The default setting “Eco” mode meets the requirements of TÜV Rheinland’s “Low Blue Light”...
1st Level Menu 2nd/3rd Level Menu Description Screen Size Auto ∙ Users can adjust Screen Size in any mode, any resolution and any screen refresh rate. ∙ Activating Screen Size 1:1 will affect: 16:9 Affected Function Function Status 21:9 » Adaptive-Sync »...
PIP/PBP 1st Level Menu 2nd/3rd Level Menu Description ∙ PIP (Picture in Picture) allows users to simultaneously display multiple video sources on Source HDMI™ 1 one screen. One program is displayed on the full screen at the same time as one or more other HDMI™...
Navi Key 1st Level Menu 2nd Level Menu Description ∙ All Navi Key items can be adjusted via OSD Menus. Down Brightness Left Game Mode Right Smart Crosshair Alarm Clock Input Source PIP/PBP Mode Refresh Rate Info. On Screen Night Vision Optix Scope Settings 1st Level Menu...
Page 17
1st Level Menu 2nd Level Menu Description Info. On Screen ∙ The information of the monitor status will be shown on the right side of the screen. HDMI™ 2.1 Console ∙ To reach maximum resolution of 3440x1440@175Hz, users have to set HDMI™ 2.1 to PC. HDMI™...
MSI OLED Care 1st Level Menu 2nd/3rd Level Menu Description Pixel Shift Slow ∙ Pixel Shift moves the pixels of your screen at regular intervals to reduce the possibility of Normal screen burn-in or image retention. Fast Panel Protect ∙ To maintain panel image quality, panel protect function will automatically activate when monitor using over 4 hours.
Page 19
∙ Reducing effect depends on Brightness/ DisplayHDR setting. OLED Panel Info. ∙ This field shows the information of MSI OLED Care. * HDMI™ VRR (Variable Refresh Rate) synchronizes with Adaptive-Sync (ON/ OFF). For VRR ON/OFF status, please check Adaptive-Sync.
Specifications Monitor MAG 341CQP QD-OLED Size 34.18 inch Curvature 1800R Panel Type QD-OLED Resolution 3440 x 1440 (UWQHD) Aspect Ratio 21:9 Brightness SDR: 250 nits (typ.) Contrast Ratio 1500000:1 Refresh Rate 175Hz Response Time 0.03ms (GTG) 0.1ms (Tr+Tf) ∙ HDMI™ Connector x 2 ∙...
Page 21
Monitor MAG 341CQP QD-OLED VESA Mounting ∙ Plate Type: 100 x 100 mm ∙ Screw Type: M4 x 10 mm • Thread Diameter: 4 mm • Thread Pitch: 0.7 mm • Thread Length: 10 mm Dimension (W x D x H) 812 x 318 x 427 mm 8.8 kg Weight...
Preset Display Modes ⚠ Important All information is subject to change without prior notice. Standard Default Mode HDMI™ 2.1 - PC Standard Resolution HDMI™ USB-C 2560x1440 @60Hz @120Hz WQHD 3440x1440 @50Hz @60Hz @100Hz @144Hz @175Hz Video 720P Timing 1080P @60Hz Resolution @120Hz 2160P...
Page 23
PIP Mode - Without HDR Standard Resolution HDMI™ USB-C Full HD 1920x1080 @60Hz 2560x1440 @60Hz WQHD 3440x1440 @50Hz @60Hz Video 720P Timing 1080P @60Hz Resolution 2160P @30Hz @50Hz @60Hz PBP Mode 1 - Main/Sub without HDR Standard Resolution HDMI™ USB-C Video 720P Timing...
Troubleshooting The power LED is off. • Press the monitor power button again. • Check if the monitor power cable is properly connected. No image. • Check if the computer graphics card is properly installed. • Check if the computer and monitor are connected to electrical outlets and are turned on.
∙ Place the power cord in a way that people are unlikely to step on it. Do not place anything on the power cord. ∙ If this device comes with an adapter, use only the MSI provided AC adapter approved for use with this device.
Page 26
∙ If any of the following situations arises, get the device checked by service personnel: • The power cord or plug is damaged. • Liquid has penetrated into the device. • The device has been exposed to moisture. • The device does not work well or you can not get it working according to the User Guide.
TÜV Rheinland Certification TÜV Rheinland Low Blue Light Certification Blue light has been shown to cause eye fatigue and discomfort. MSI now offers monitors with TÜV Rheinland Low Blue Light certification to ensure users’ eye comfort and well-being. Please follow the instructions below to reduce the symptoms from extended exposure to the screen and blue light.
1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. MSI Computer Corp. 901 Canada Court, City of Industry, CA 91748, USA (626) 913-0828 www.msi.com...
Page 29
Vietnam RoHS As from December 1, 2012, all products manufactured by MSI comply with Circular 30/2011/TT-BCT temporarily regulating the permitted limits for a number of hazardous substances in electronic and electric products.
Need help?
Do you have a question about the MAG 341CQP QD-OLED (3DD0) and is the answer not in the manual?
Questions and answers