Battery Power Source - Fluke 1738/B User Manual

6. Connect the voltage inputs to the test points.
The Logger automatically turns on and is ready to use in <30
seconds.
You must locate and connect an alternate power source to
the instrument if the voltage to measure is <100 V or >500 V.
Use the set of 2 m test leads (item 8 in Figure 11) or the
supplied power cord.
7. Connect the voltage inputs to the test points.
The Logger automatically turns on and is ready to use in
<30 seconds.
Note

Battery Power Source

The Logger can operate on battery power without a connection to the
power supply or dc power cord.

Push . The Logger turns on and is ready to use in <30 seconds.
The battery symbol in the status bar and the power LED indicate the
battery status. See Table 5.
Table 5. Power/Battery Status
Logger On
Power Source Battery Symbol
Mains
Battery
Battery
Battery
Battery
Battery
Logger Off
Power Source Battery Status
Mains charging
Mains off
Logger Status
not logging
logging
Power Logger
Power
Power LED Color
green
yellow
yellow
yellow
yellow
red
Power LED Color
blue
off
steady
flashing
15