Jet Wash - Yamaha 190 FSH Sport 2017 Owner's/Operator's Manual

Jet wash™

WARNING
The jet wash system must be used only by
a passenger who is not operating the boat.
While the jet wash system is being used,
the boat operator must attach the engine
shut-off cord (lanyard) to their PFD and
scan constantly for people, objects, and
other watercraft.
NOTICE
If the jet wash system will not be used
●
for an extended period, turn the shut-off
valve to the closed position. Before us-
ing the jet wash system, make sure that
the shut-off valve is in the open position.
If water leaks from the hose fitting or coil
hose or if you notice any other problem,
turn the shut-off valve to the closed po-
sition immediately.
While the jet wash system is being used,
●
scan constantly for people, objects, and
other watercraft. Otherwise, the boat
could collide with another watercraft, a
dock, or other obstacle.
Before using the jet wash system, make
●
sure that the anchor light socket is
closed. If the anchor light socket is not
closed and water enters the socket, the
socket could malfunction.
The hose fitting for the coil hose is located on
the deck near the jump seat (starboard).
Equipment operation
1
1 Hose fitting
To use the jet wash:
(1) Connect the coil hose to the hose fitting.
1
1 Coil hose
2 Hose fitting
(2) Start the engine. (See page 89.)
(3) Push the jet wash switch.
BILGE
LIVEWELL
1
JET
WASH
1 Jet wash switch
2
MNL
AERATOR
AUTO
67