Product voltage :220V Rated power:1800 watts and 1200watts 1.Power on: open the power supply knife of the machine cable. After power on, all display units will light up once and the buzzer will drop once. Power button: each furnace area has an independent power button. When you want to start one of the burners, press the power button to turn on the power and enter the standby state.
Page 3
5. Firepower adjustment: in heating mode, push the regulator, the digital gear from 1 to 9 is normal heating gear, and the P gear is rapid heating. After 3 minutes, it will return to the 9 gear. Turn to 0 to stop heating. 6.Shutdown: In heating mode, long press the power button (long press for two seconds) to exit heating and return to shutdown state.
Page 4
11. Product dimensions and precautions: HEAT DISSIPATION STRUCTURE INSTALLATION DRAWING 11.1. Product size 288*510*82 (11.3*20.0*3.22 inches) If not including the When the machine is embedded, to ensure the normal use of the machine and foot of the fuselage thickness is 65MM/2.55 inches. better heat dissipation.
Page 6
This product does not consider the following: Warning: If the surface is cracked, turn off the appliance to avoid possible electric shock. Use of equipment by unattended young children and disabled children's play equipment. 01. Do not overheat an empty pan. 02.
Need help?
Do you have a question about the DT2W and is the answer not in the manual?
Questions and answers