Setting The Camera Sounds; Setting Quick Review - Vivitar Vivicam 3200 User Manual

Setting the Camera Sounds

By default, the camera is set to beep whenever you take a picture, connect the camera to a computer, or
encounter an error condition.
To turn the beep sound off:
1
Set the Mode switch to PREF.
2
Turn the camera on.
Press the 6 button until the Sounds menu tab is
3
on top.
4
Press the Select button to open the menu.
Press the 6 button to highlight the Off menu
5
option.
6
Press the Select button to activate the setting and
exit the Sounds menu.
è If you wish to turn the camera beep back on at a
later time, follow the same procedure and select
the On menu option.

Setting Quick Review

By default, the camera displays the picture for a short period of time after you have taken it. This feature
allows you to instantly review and delete the picture, but it also increases the drain on your batteries.
To turn off Quick Review:
1
Set the Mode switch to PREF.
2
Turn the camera on.
Press the 6 button until the Quick Review menu
3
tab is on top.
4
Press the Select button to open the menu.
Press the 6 button to highlight the Off menu
5
option.
6
Press the Select button to activate the setting and
exit the Quick Review menu.
è If you wish to turn Quick Review back on at a
later time, follow the same procedure and select
the On menu option.
TIP If your batteries have a low charge, or if you want to maximize the number of pictures you
can take using one set of batteries, turn Quick Review off.
Viewing and Downloading Your Pictures Using a PC
23