Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for CSL XDSL
Summary of Contents for CSL XDSL
- Page 1 CSL xDSL Router Quick Guide CSL XDSL ROUTER QUICK GUIDE...
- Page 2 CSL xDSL Router Quick Guide Introduction CSL xDSL Router Merlin QUICK GUIDE & INSTRUCTION MANUAL...
- Page 4 QUICK GUIDE This section provides basic information to enable you to install and commission a CSL Router quickly. CSL Router is preconfigured with the SIMs already fitted in the SIM slots.
-
Page 5: Step 1. Installation Site
CSL xDSL Router Quick Guide Step 1. Installation Site Find a suitable location with good 4G coverage Keep away from sources of interference i.e. monitors, fridges, power supplies, etc. LEDs will show connection status... - Page 6 CSL xDSL Router Quick Guide Step 2. Aerial xDSL and Power Fit the included Aerial to the front connection port marked CELL PRIM & CELL Plug the PSTN line into the DSL port on the front of the router and plug the other end into the BT socket.
-
Page 7: Step 3. Xdsl Status
CSL xDSL Router Quick Guide Step 3. xDSL Status If the xDSL service provisioning has been confirmed the SYN LED should blink (FLASHING) and then become solid. Once the line synch is complete the LED DAT should flash indicating data... -
Page 8: Step 4. Signal Strength
CSL xDSL Router Quick Guide Step 4. Signal Strength For best results ensure that both green signal strength LEDs are ON to indicate the Router has established good signal strength OFF/ON LED status indicates a medium signal strength which is also... -
Page 9: Step 5. Connect Devices
192.168.100.2/24. Please see the sticker on the back page for your specific 4G Router WAN SIM IP Address. THE EXTERNAL WALL-MOUNTED CSL HIGH-GAIN AERIALS ARE AVAILABLE AS AN OPTIONAL ACCESSORY. PLEASE CONTACT CSL M2M SUPPORT FOR MORE INFORMATION CSL M2M Support can be contacted via email at M2MSupportThames@csl- group.com or by phone at +44 (0) 1895 546 214... -
Page 10: Troubleshooting
A: The SYN indicator should be on and stable and the DAT indicator should be on but flashing to show data is passing through the router. If the SYN is on & DAT indicators are on but not flashing then contact CSL Technical Support to confirm the router’s xDSL path has been restored. - Page 11 The issue could also be the customer’s telephone line extension leads or sockets are faulty – check these and replace them if necessary. If the SYN is on & DAT indicators are on but not flashing then contact CSL Technical Support to confirm the router’s xDSL path has been restored.
- Page 12 Data activity is occuring via Green - on/flashing Wi-Fi SUPPORT For more information on CSL Router or other M2M Services please contact CSL Technical Support: UK Tel: +44 (0) 1895 546 214 Email: M2MSupportThames@csl-group.com Please ensure you have the following information when contacting CSL support...
Need help?
Do you have a question about the XDSL and is the answer not in the manual?
Questions and answers