Demonstration Procedure; Operation Of Al Auto (For Cd Play Only) - Kenwood GE-970 Instruction Manual

Operation of graphic equalizer
@ Demonstration procedure
This feature makes it possible to check the equalizer effects both visually and audibly.
Al (AUTO)
@ Play the source. AI LINK
@® Select DEMO with the DISPLAY key. REFERENCE? (R1) 1~5
@ Demonstration is repeated in the following cycle. REFERENCE2 (R2) 1~5
MANUAL (M) 1~5
e Press the
key to stop demonstration.
REC MODE
* During Al LINK demonstration, the Surround mode also changes.
Selecting "DEMO" starts
e |fthe demonstration is started while the unit is in the Surround mode, the Surround sequential demonstration.
mode will be turned OFF during demonstration.
@ Operation of Al AUTO (for CD play only)
1 Place a disc in the CD player. jemas Track Nos
in disc are
TRACK lights up.
:
indicated.
Check that the presence mode is OFF.
2 Press the Al key.
Blinks Lights up.
\_! 7) about 30 sec.
—
ends
nalyzer displa
Completes and stops in Spectiunmnenaly: el
about 30 seconds. Graphic equalizer display
¢ Wait for about 30 seconds untiliEQ.ON| and
light up.
© The LINEAR ACOUSTIC control knob on the amplifier (A-87, A-
97) is set automatically.
The playback starts automatically.
Note:
In step 2, the other keys than the and the [POWER] key do not operate.
To cancel Ai AUTO
e goes off.
¢ If it is cancelled during Al AUTO setting operation, te last
pattern selected before is displayed.
Cancellation
during setting Cancellation during play
10 Ges706n)
i
i
i