Summary of Contents for Hamax Universal Carrier adapter
Page 1
Manualul utilizatorului Important! Uputstvo za korisnike Руководство пользователя Bruksanvisning Please check the user manual of the child seat or www.hamax.no if the Uporabniški priročnik child seat is compatible with this carrier adapter. Návod na použitie Ръководство за потребителя Посібник користувача...
Page 2
We wish you and your child many enjoyable the danger of entrapment of feet in the wheel bicycle trips with your Hamax child seat! and of the finders in brake mechanisms and sprung saddles. The child seat gives good side Best regards from us at Hamax.
Page 4
Mount the adapter on the carrier Mount the seat on the adapter Unscrew the 2 bolts (1f) with the Hex tool (1e) until the 4 clamps To mount the seat on the adapter, open the side levers (2), (1c) fit over the carrier rack of the bicycle. Place the Carrier adapter take out the excentric shaft (3) or open the hooks (4).
Page 5
Lock the seat on the adapter Adjusting the seat Set the seat down on the adapter. Close the 2 side levers (2) or insert Position the seat (1) and adapter as much towards the front and lock the excentric shaft (3) to make the rear connection. The as possible while still leaving room for reclining the seat (2) if hooks of Caress will lock automatically when the seat is pushed needed.
Before embarking on a bicycle trip Attach the safety strap The additional safety strap needs to be secured to the frame or • Adjust the safety belt (2) seat post. Lead the safety strap (1d) through the holes as shown in •...
Page 7
You may also mount the seat on a bicycle frame button (4). using the Hamax frame bracket, suitable for tube diameter of 28-40 mm. This can be useful if your family uses different types of bicycles.
Need help?
Do you have a question about the Universal Carrier adapter and is the answer not in the manual?
Questions and answers