3.1.9.5 Configure floor call
The following item allows the floor call parameters to be configured.
Follow the steps below to carry out the configuration:
• Within the alarm menu, press on the item Configure floor call contact.
Enable Yokis: enabling the following parameter activates a previously configured Yokis command
–
or scenario when a floor call is made.
Enable special decoding: by enabling the following parameter, a special code can be activated on
–
a special decoding Ref. 1083/80 present in the system, when a floor call is made.
Set custom message: it is possible to set a custom message that will be shown on the display of
–
the video door phone when a floor call is made.
3.1.10 Enabling the key reader MIFARE
The following parameter enables the MIFARE key reader on the video door phone.
• Switch on the screen, if switched off, by touching it anywhere or pressing the Home button.
• Press the icon
• Press the icon
18
to access the Top Page.
to access the video door phone parameter configuration page.
DS1760-034