Accessory Use - Mosa GE 55 PSX Use And Maintenance Manual

ACCESSORY USE

The remote control device for regulating the welding
current is connected to the front panel by means of
a multipole connector.
To regulate the current from the TC2 / TC2/50,
move the switch (7), located above the multipole
connector (8), to "ON" position.
Position welding current adjusting (T) knob at the
necessary current value for the diameter and type
of electrode.
ON
OFF
REMOTE CONTROL
TC2 / TC2/50
PUSH AND
SCREW TIGHT
M
38
REV.1-06/05