Pump Matrix - VERDER VERDERAIR HC-PURE SB Series Manual

PUMP MATRIX

Before putting your pump in operation remove
all packing materials after reception. Check the
consignment for damage at once and make
sure that the name plate / type designation is in
accordance with the packing slip and your order.
All pumps have identification plate (ID) located
on the pump housing. The ID is mentioning the
year of construction, the serial number and the
construction code of the pump.
Size
15
25
40
50
Example: VA-HCP15 XN ST TF TO D2 SB
Approvals
EC 1935/2004, FDA, CE, UKCA, ATEX
Notes:
- Not all combinations are available, contact your local
supplier for more info.
- Some of the mentioned options can be combined in
1 pump, for available combinations please check the
list at page 22.
21-VA-MA_Manual_HC-PURE SB_rev1-en.indd 3 21-VA-MA_Manual_HC-PURE SB_rev1-en.indd 3
PUMP CODING VA-HCP SB
Housing Seat and Gasket
XN: SS316L 0.8 μm ST: Stainless steel
with PA6 air section seats with PTFE
XG: SS316L 0.8 μm gasket
with PE conductive SE: Stainless steel
air section seats with EPDM
gasket
Use the matrix below to define the components
of your pump. Make sure the wetted parts of the
pump are compatible to the pumped liquid.
NOTE:
In case of doubt, please contact your local supplier
(www.verderliquids.com). To build a pump code,
please see the below coding system.
Valves Diaphragms Connections
EP: EPDM ball TO: PTFE T2: Tri-clamp 1 in.
TF: PTFE ball overmolded T4: Tri-clamp 1,5 in.
EO: EPDM T5: Tri-clamp 2 in.
overmolded T6: Tri-clamp 2,5 in.
D2: DIN 11851 DN25
D4: DIN 11851 DN40
D5: DIN 11851 DN50
D6: DIN 11851 DN65
21-VA-MA_Manual_HC-PURE SB_rev1-en | 23.06.2023
Options
SB: Food grade
SS: Stroke sensor
RE: Remote
LS: Leak detecion,
sensor only
3
23-06-2023 10:13 23-06-2023 10:13