Enabling Or Disabling B-Brake Levels; Enabling Or Disabling Ramp-Up And Ramp-Down Times - Hettich ROTANTA 460 Operating Instructions Manual

Software operation
7.6.5

Enabling or disabling B-brake levels

7.6.6

Enabling or disabling ramp-up and ramp-down times

56 / 73
B-brake levels can only be set for rotors that are suitable for
use with blood bags.
−
Setting the B-brake levels is only possible if they are
enabled.
−
Setting ramp-down times is only possible if they are
enabled.
1. Press and hold the
'***Machine Menu***' is displayed after 8 seconds.
��
[PROG] button repeatedly until '-> Settings' is displayed.
2. Press the
[START] button.
3. Press the
'SOUND / BELL = on' or 'SOUND / BELL = off' is displayed.
��
4. Press the [PROG] button repeatedly until 'SOUND / BELL = on' or
'SOUND / BELL = off' is displayed.
[Rotary knob] to set 'off' or 'on' .
5. Use
off = B-brake levels disabled,
on = B brake levels enabled.
[START] button.
6. Press the
�� The settings are stored.
'Store Settings...' is displayed briefly.
'-> Settings' is then displayed.
[STOP/OPEN] button once to exit the 'Settings menu'
7. Press the
or
[STOP/OPEN] button twice to exit the 'Machine Menu' .
Press the
The rotor is stationary.
1. Press and hold the
'***Machine Menu***' is displayed after 8 seconds.
��
2. Press the [PROG] button repeatedly until '-> Settings' is displayed.
[START] button.
3. Press the
'SOUND / BELL = on' or 'SOUND / BELL = off' is displayed.
��
[PROG] button repeatedly until 'Ramp Unit = Steps' or
4. Press the
'Ramp Unit = Steps / Time' is displayed.
[Rotary knob] to set 'Steps' or 'Steps / Time' .
5. Use
Steps = ramp-up and ramp-down times disabled,
Steps / Time = ramp-up and ramp-down times enabled.
[START] button.
6. Press the
�� The setting is stored.
'Store Settings...' is displayed briefly.
'-> Settings' is then displayed.
[STOP/OPEN] button once to exit the 'Settings menu'
7. Press the
or
[STOP/OPEN] button twice to exit the 'Machine Menu' .
Press the
Rev.: 05 / 11.2023
[PROG] button.
[PROG] button.
AB5650en_SA