Advertisement
Section
Model 8012A
1-8
MANUAL IDENTIFICATION
1—7
This instrument carries a 10-character serial
number on the rear panel, the first 5 characters of which
are termed the serial number prefix. If the prefix does
not agree with that quoted on the title page, reference
should be made to the change sheets supplied with the
manual. To obtain further information for any instru¬
ment, contact the nearest Hewlett-Packard Sales/Service
Office, always specify the model number and complete
serial number.
1-8
ORDERING ADDITIONAL MANUALS
1—9
One manual is shipped with each pulse
generator. Additional manuals may be purchased from
the local Hewlett-Packard field office (see list at rear of
this manual for addresses}. Specify the model number
complete serial number prefix, and HP stock number
provided on the title page.
c,
RZ Mode:
In this mode external
pulses applied to the input socket on
the rear panel determine the repet¬
ition rate of the output pulses. All
other output pulse parameters are
determined by the pulse generator's
front panel controls, but gating is not
possible. Note that the pulse available
at the trigger output socket, being
derived from the internal oscillator, is
not related to the RZ output.
1-4
ACCESSORIES AVAILABLE
1—5
Electronic test equipment, cables, connec¬
tors, adapters, and other accessory items are available
from Hewlett-Packard. For more information on specific
items consult the Hewlett-Packard Catalog or Sales/
Service Office.
Figure 2-1 Pulse Generator and Supplied Accessories
Page 1—4
Advertisement
