Summary of Contents for VACU ACTIV Infrashape Horizontal
Page 1
Infrashape Multivision interface User Manual 02/2022 vacuactiv.com...
Page 2
1. The device needs to be placed on a smooth surface. 2. Make sure that the electric wire is not damaged. 3. All types of repairs should be performed by an authorized service centre. Copyright 2022 Vacu Activ support@vacuactiv.com...
Technical specification Power Voltage 230VAC / 50Hz / 1PH Power consumption 2.5kW support@vacuactiv.com Copyright 2022 Vacu Activ...
Page 4
Negative ion emission: 9000000 ions/cm3, Ozone Ozone emission: 0.05ppm, A single LED lamp, 30W, Collagen Wavelength – 620nm, An option to turn on/off during the training, An independent electrostimulation system, Electrostimulation Predefined programs, The electrodes have the disinfection function. Copyright 2022 Vacu Activ support@vacuactiv.com...
Page 6
Repeat the exercise several times. ARMS INCLINATIONS Lift your right arm towards your ear then lift your left arm. Repeat the exercise several times. Copyright 2022 Vacu Activ support@vacuactiv.com...
Page 7
Repeat the exercise several times with the right and left hand. QUADRICEPS STRETCH Rest one of your hands on the wall to steady and pull your leg to the buttocks, as shown in the figure. Repeat the exercise for both legs. support@vacuactiv.com Copyright 2022 Vacu Activ...
Page 8
Repeat the exercise several times on both legs. BENDS Touch your toes with your hands. During the bends, keep your knees straight, shoulders and arms relaxed. Repeat the exercise several times. Copyright 2022 Vacu Activ support@vacuactiv.com...
Page 9
Sit on the ground, straighten one leg, and bend the second one. Reach out a hand towards the extended leg and hold on to this position for a few seconds. Relax and repeat on the other leg. support@vacuactiv.com Copyright 2022 Vacu Activ...
Page 10
Multivision application When Infrashape Horizontal device will be switched on, the Vacu Activ Multivision app will launch automatically. In home screen the application informs about waiting for connection with the device. It takes up to 30 seconds. Copyright 2022 Vacu Activ...
Page 11
When the connection is established, Infrashape Horizontal is ready for work. support@vacuactiv.com Copyright 2022 Vacu Activ...
[ TRAINING IN INFRARED ] – selecting training in infrared option, [ TRAINING IN VACUUM ] – selecting training in vacuum option, After choosing a workout mode, a screen with a selection of training programs [SELECT PROGRAM] will be displayed. Copyright 2022 Vacu Activ support@vacuactiv.com...
Page 13
Training program selection Depending on the selected work mode, there are five (if only infrared work mode was chosen) or six (for other work modes) training programs: support@vacuactiv.com Copyright 2022 Vacu Activ...
Page 14
After selecting this program, the user will be asked to choose the minimum and maximum value of vacuum. The higher the difference between the two values, the harder the training. Copyright 2022 Vacu Activ support@vacuactiv.com...
Page 15
Training program selection support@vacuactiv.com Copyright 2022 Vacu Activ...
Page 16
Features of [LIGHT WALK] training: Features of [AEROBIC] training: Copyright 2022 Vacu Activ support@vacuactiv.com...
Page 17
Features of [FAST BURNING] training: Features of [HEAVY TRAINING] training: support@vacuactiv.com Copyright 2022 Vacu Activ...
Page 18
Features of [LYMPHATIC DRAINAGE] training: After selecting a training option, a screen with training parameters will be displayed. Copyright 2022 Vacu Activ support@vacuactiv.com...
Page 19
Select the training program or touch the accept symbol (in the manual mode) to display the [MULTIVISION TRACK] screen where you can choose the video to exercise in the selected operating mode. support@vacuactiv.com Copyright 2022 Vacu Activ...
Page 20
Manual to set the vacuum range (from 0 to 30 millibar) Copyright 2022 Vacu Activ support@vacuactiv.com...
Page 21
Manual settings for lymphatic drainage switching time between lower and higher vacuum (from 10 to 120 seconds) support@vacuactiv.com Copyright 2022 Vacu Activ...
Page 22
• Approve the selected video by touching the accept symbol. Beunos Aires • When the video is selected, touch the accept symbol to display the summary screen. • The selected video can be started only during the training. Copyright 2022 Vacu Activ support@vacuactiv.com...
Page 23
Los Angeles Chicago support@vacuactiv.com Copyright 2022 Vacu Activ...
Page 24
San Francisco Northern Italy Copyright 2022 Vacu Activ support@vacuactiv.com...
Page 25
Costa Rica Press [PRESS FOR START] on the summary screen to proceed to the screen starting the training session. support@vacuactiv.com Copyright 2022 Vacu Activ...
Page 26
Press [START] to begin the training session. You can pause the training by touching the pause symbol [ II ]. Touching the [STOP] symbol will stop the training and the summary screen [SUMMARY] will be displayed. Copyright 2022 Vacu Activ support@vacuactiv.com...
Audio Player - playing audio files from portable devices. The portable device is plugged in the USB port visible on the device panel. Netflix - is a subscription streaming service that allows users to watch movies, series and TV shows. support@vacuactiv.com Copyright 2022 Vacu Activ...
Page 28
To use the multimedia files stored on a portable device, plug it in the USB port on the panel, touch the icon in the lower left corner of the screen and select the file you want to play from the list. Copyright 2022 Vacu Activ support@vacuactiv.com...
Page 29
The player functions, such as play, stop, volume, rewind, forward, etc., are available for the user during the training session. Additionally: In the regular and Multivision Track mode, the user can switch on or off the photo-rejuvenation function - [COLLAGEN] or the breeze function - [AROMA]. support@vacuactiv.com Copyright 2022 Vacu Activ...
Page 30
The following parameters are displayed on the regular and “Multivision video” screen during the training session: • speed, • vacuum value, • infrared intensity, • calorie meter, • time remaining to training completion, • resistance, • distance, Copyright 2022 Vacu Activ support@vacuactiv.com...
Page 31
During the training session, you can modify • infrared intensity, • vacuum value, • resistance When the training session time lapses or if you press [STOP], the training is stopped and the summary screen [SUMMARY] is displayed. support@vacuactiv.com Copyright 2022 Vacu Activ...
Page 33
Infrashape Horizontal service functions To go to the service settings of the device, touch the upper left corner on the home screen. The first displayed screen allows to enter the service code; after you enter and confirm the correct access code, the service settings screen will be displayed.
Page 34
This category allows to edit videos for the Multivision function. Changes and edition are reserved for the administrator. [SERVICE] This category includes service information, i.e. device operating time counters, vacuum value settings and PIN settings. Copyright 2022 Vacu Activ support@vacuactiv.com...
Page 35
[TREADMILL TIME] – this counter measures the total time of treadmill operation in the device. The counter cannot be reset to zero [TREADMILL TIME TRIP] - the counter measures the treadmill operation time. The counter can be reset to zero support@vacuactiv.com Copyright 2022 Vacu Activ...
Vacuum settings [VACUUM MINIMUM] - this is the minimum setting of the vacuum power value in the Body Shape device. The values specified in this section are recommended by Vacu Activ. Changes can be made only by authorised persons. [VACUUM MAXIMUM] - this is the maximum setting of the vacuum power value in the Body Shape device.
Page 37
3 colours, b) step changes of 7 colours, c) smooth changes of 7 colours, 5. the change of speed of the dynamic program – 16 levels of speed of dynamic programs. support@vacuactiv.com Copyright 2022 Vacu Activ...
Need help?
Do you have a question about the Infrashape Horizontal and is the answer not in the manual?
Questions and answers