Panasonic RAMSA WS-A240 Operating Instructions Manual page 11

SYSTEM COMPARISON CHART
System Main Subwoofers Main Subwoofer Program Program VLF VLF
Loudspeakers Amplifier Amplitieris) Level (SPL)? | Peaks ISPL)! Level (SPL)? | Peaks (SPL)2
i21 WS-A80 | (2) WS-A240 | (1) wP-9110 | 111 WP-9220 | 108 dB @ Im| 118 dB @ im | 114 48g 1m
121 WS-A200 | (2) WS-A240 | tt) wP-9220 | 11) wP-9220 | 117 dB @ 1m | 127 dB G 1m | 114 dB @ 1m | 120 dB 6 1m
| o | (21 WS-A200 | (4) WS-A240 127 dB @ 1m | 120 dB @ Im] 126 dB @ 1m
ee | (4) WS-A200 | (B) WS-A240 | (1) WP.9220 | 12) WP-9220 | 119 dB @ 1m | 129 dB @ 1m | 125 dB @ 1m
1. From available amplifier power, 10dB crest factor assumed, both channels driven.
2. From available amplifier power above 40Hz, 6dB crest factor assumed due to limited band pass.
WS-A240 SPECIFICATIONS
Type:
impedance:
Frequency Response:
Power Capacity: :
Sound Pressure Level:
Reference Efficiency:
Volume displacement:
Speaker
Dimensions:
Weight:
Finish:
Bass reflex type
8 ohms
(WS-A240 used with WS-SP2A) +3 dB, 35 Hz to main loudspeaker transition
frequency
400 watts measured in accordance with EIA RS-426A
91 dB (1W/1m, half-space), 85 dB (1W/1m, spherical free field)
0.83% (half-space)
6.0 x 10-4m3 (0.021 ft3); equivalent to 125 dB at 100 Hz at 1m
30 cm cone speaker
15-9/16"(395mm)[W] x 21-15/16"(557mmlIHI x 10-3/4"(272.5mml[D]
35 Ibs. (16 kg.)
Enclosure: Resin molded, black
Front Panel: Punched grill, black
WS-SP2A SPECIFICATIONS
Type:
Input:
Outputs:
Maximum Output Level:
Minimum Load Impedance:
Gain (Pink noise):
Output Noise Level:
Distortion:
' Cross Talk:
Turn-on Delay:
Power Requirements:
Dimensions:
Weight:
Finish:
Line-level Subwoofer Processor
Two, electrically balanced: Input A, Input B (female XLR type}, 4 4 dB, 20 kohms
Four, unbalanced:
Output A (high pass processed), 1/4-inch, +4 dB,
Output B (high pass processed), 1/4-inch, +4 dB,
VLF output (sum of A and B, band pass processed), 1/4-inch +4 dB,
A + B output (sum of A and B all pass), 1/4-inch, +4 dB.
+20 dB
600 ohms
Unity
-95 dB or less (IHF A WTD)
Outputs A, B, A+B; 0.05% or less (+4 dB at 1 kHz)
VLF Outputs; 0.05% or less (+4 dB at 35 Hz, VLF l! switch is at the A position)
60 dB or more at 10 kHz
Approx. 3 to 5 seconds
120V AC, 60 Hz, 126 mA (12W)
8-5/16" (W) x 1-3/4" (H) x 8-5/16" (D)
210 mm (W) x 44.5 mm (H) x 210 mm (D)
Approx. 4 lbs (1.8 kg)
Matte black
l0 a