Table of Contents
Advertisement
2L8
8V SO
You can select a number of tracks and store these in the memory
in the desired sequence. You can store any track more than once.
At most, 20 tracks can be stored in the memory.
1 Select the desired track with SEARCH i or pps.
2 As soon as the desired track is displayed, press the PROGRAM
(js
button to store the track in the memory.
—> PROGRAM appears in the display. The number of the stored
{9°
track, - and the total number of stored tracks is shown,
| s+
3 Select and store all desired tracks in this way.
You can review your settings by pressing the PROGRAM button
for more than 2 seconds.
-» The display shows all stored track numbers in sequence.
Notes: — If you try to store more than 20 tracks, the display
shows Fiih b .
~ If you press PROGRAM and there is no track
selected the display shows SELELe,
If you have selected the tracks in the stop position, press
PLAY-PAUSE Pil
f you have selected the tracks during CD play, first press STOP mm
ani
and then press PLAY-PAUSE Pt.
ea)
Erasing the program from the stop position
From the stop position, press STOP ml.
rye
—» [LEA
lights up briefly, pRocRAM disappears and your
program is erased.
-
r
=a
>
Notes: The program will also be erased if you
— interrupt the power supply,
— open the tray, or
— press the POWER button.
1 Select the tape by pressing the CD-TAPE-TUNER button
several times until
appears on the display.
2 Press STOP-OPEN Ml & to open the cassette compartment.
3 Insert a recorded cassette with the open side facing the front.
4 Close the cassette compartment by pushing it down.
5 Press PLAY > to start playback.
6 By pressing << or >» fast winding of the tape is possible in both
directions.
7 To stop the tape press STOP-OPEN mm 4.
Notes: — The keys are automatically released at the end of the tape.
— If PLAY ® or RECORD @ are depressed, you can not
Switch to another sound source.
General information on rece
Recording is permissible insofar as copyright or other rights of
third parties are not infringed upon.
For recording on this set you should use a cassette of the type
NORMAL (IEC type I). This deck is not suitable for recording on
cassettes of the type CHROME (IEC type II) or METAL (IEC
type IV).
The recording level is set automatically, The controls VOLUME,
DSC, DBB and INCREDIBLE SURROUND do not affect the recording.
At the very beginning and end of the tape, no recording will take
place in the 7 seconds during which the leader tape passes the
recorder heads.
Protecting tapes from accidental erasure
Keep the cassette side to be protected in front of you and snap off
\\
the left tab. Now, recording on this side is no longer possible.
Co
To record again on this side of the cassette, cover the aperture
with a piece of adhesive tape.
ASN
HOS
NOLLONYLSNI
94}
40 }dusoxe
jeug
8-c
Advertisement
Table of Contents
