Options - Sony HD Trinitron HDM-20E1J Operation Manual

• Enable to mount units in an EIA-standard 19-inch
rack, using an optional BKM-30E20/30E14/31E14
Rack Mount Kit.
• Controllable from the optional BKM-10R/11R
Monitor Control Unit. (For details about connection
and operation, refer to the BKM-10R/11R Operation
Manual).

Options

For external control
BKM-10R/11R Monitor Control Unit
A controller for this monitor, allowing you to control
multiple monitors from one control unit.
BKM-12Y Monitor Memory Card
Memory cards which can be read and written by the
BKM-10R/11R and HDM-14E5U.
BKM-14L Auto Setup Probe
This probe allows automatic adjustment of this
monitor's color temperature.
For installation
BKM-30E20 Rack Mount Kit
Rack mount kit for mounting the HDM-20E1U in an
EIA standard 19-inch rack.
BKM-30E14 Rack Mount Kit
Rack mount kit for mounting the HDM-14E5U in an
EIA standard 19-inch rack.
BKM-31E14 Rack Mount Kit
Rack mount kit for mounting the HDM-14E1U in an
EIA standard 19-inch rack.
BKM-32H Monitor Control Unit Attachment Kit
Assembly kit for attaching a BKM-10R Monitor
Control Unit to the HDM-20E1U monitor.
Input expansion adaptors
The input connector panel is configured by sliding
optional input expansion adaptors into input option
slots at the rear of the monitor. The HDM-20E1U/
14E5U may be fitted with up to four adaptors, and the
HDM-14E1U will accept two.
Note
When installing the adaptors, be sure to perform the
necessary input signal setup with the INPUT
CONFIGURATION menu. If the setup is not
performed, the adaptors may not function correctly.
For information about the INPUT CONFIGURATION
menu, see "Setting the Input Configuration (SET UP 1 —
INPUT CONFIGURATION Menu" on page 28 (E).
BKM-41HD HD SDI Input Adaptor (one HD SDI
channel)
Includes a decoder for HD serial digital signals and
input/output connectors for a serial digital signal
channel and an analog signal channel. Select the input
signal type for each connector with the INPUT
CONFIGURATION menu, in accordance with the
configuration of the connector panel.
BKM-42HD HD SDI Input Adaptor (two HD SDI
channels)
Includes a decoder for HD serial digital signals and
input/output connectors for two serial digital signal
channels and an analog signal channel. Select the input
signal type for each connector with the INPUT
CONFIGURATION menu, in accordance with the
configuration of the connector panel.
Notes
• The BKM-41HD and BKM-42HD use two input
option slots.
• The signal from MONITOR OUT connector does not
satisfy the ON-LINE signal specifications.
5 (E)