Sony Blu-ray Disc BDP-S470 Operating Instructions Manual page 22

Cinema Conversion N ode
Auto
Normally select this. The
player automatically detects
whether the material is
video-based or film-based,
and switches to the
appropriate conversion
method.
Video The conversion method
suited for video-based
material will always be
selected regardless of the
material.
Output V ideoFormat
HDMI Normally select "Auto."
Select "Original Resolution"
to output the resolution
recorded on the disc. When
the resolution is lower than
the SD resolution, it is scaled
up to the SD resolution.
Component Select the resolution that
Video suits your TV.
Video
Automatically sets the
lowest resolution.
• When connecting the HDMI OUT jack and other
video output jacks at the same time, select
"Component Video."
• If no picture appears when setting "HDMI" or
"Component Video" resolution, try another
resolution setting.
BD/DVD-ROI 1080/24p Output
Auto Outputs 1920 x 1080p/
24 Hz video signals only
when connecting a 1080/
24p-compatible TV using
the HDMI OUT jack.
Off Select this when your TV is
not compatible with 1080/
24p video signals.
YCbCr/RGB(HDMI)
Auto Automatically detects the
connected TV type, and
switches to the matching
color setting.
Outputs YCbCr 4:2:2 video
signals.
Outputs YCbCr 4:4:4 video
signals.
Outputs RGB video signals.
YCbCr (4:2:2)
YCbCr (4:4:4)
RGB
HDMIDeepColorOutput
Auto Normally select this.
12bit Outputs 12bit/10bit video
10bit
signals when the connected
TV is compatible with Deep
Color.
Off Select this when the picture
is unstable or colors appear
unnatural.
PauseNode
Auto
Frame
Normally select this.
Dynamic moving pictures
appear without blurring.
Displays static pictures at
high resolution.
22