Toshiba 32WLG66s Service Manual
  1. Manuals
  2. Brands
  3. Toshiba Manuals
  4. LCD TV
  5. 32WLG66s
  6. Service manual
Toshiba 32WLG66s Service Manual

Toshiba 32WLG66s Service Manual

Lcd color television
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
SERVICE MANUAL
This model is classified as a
This Service Manual describes replacement parts for the green product. When repairing this
green product, use the part(s) described in this manual and
For (*1) and (*2), refer to
SOLDER.
© TOSHIBA CORPORATION
file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.439\32W...
LCD Color Television
32WLG66s
green product
(*1), as indicated by the underlined serial number.
GREEN PRODUCT PROCUREMENT
Ver. 1.01
lead-free solder
(*2).
and
LEAD-FREE
Стр. 1 из 1
02.05.2015

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 32WLG66s and is the answer not in the manual?

Questions and answers

Related Manuals for Toshiba 32WLG66s

Summary of Contents for Toshiba 32WLG66s

  • Page 1 This Service Manual describes replacement parts for the green product. When repairing this green product, use the part(s) described in this manual and lead-free solder (*2). For (*1) and (*2), refer to GREEN PRODUCT PROCUREMENT LEAD-FREE SOLDER. © TOSHIBA CORPORATION file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.439\32W... 02.05.2015...

  • Page 2: Green Product Procurement

    Corporation recognizes environmental protection as a key management tasks, and is doing its utmost to enhance and improve the quality and scope of its environmental activities. In line with this, Toshiba proactively promotes Green Procurement, and seeks to purchase and use products, parts and materials that have low environmental impacts.

  • Page 3: Lead-Free Solder

    Стр. 1 из 1 LEAD-FREE SOLDER This product is manufactured using lead-free solder as a part of a movement within the consumer products industry at large to be environmentally responsible. Lead-free solder must be used in the servicing and repair of this product. WARNING: This product is manufactured using lead free solder.

  • Page 4: Important Notice

    Through WEB, ver. 6.5 has been released but with it, the linking function in this manual may not work properly. If ver. 6.5 has been installed, uninstall it and reinstall ver. 6.0. To get ver. 6.0, click the icon, or contact to the nearest Toshiba Service Centre for further assistance. Freezing windows opened (Cannot close the open windows) This may happen occasionally.
  • Page 5 Стр. 2 из 2 Continue to use by operating the windows. Precaution when opening the diagrams While opening the diagrams, the menu in the left frame changes its color to GRAY. This is an indication that the viewer is processing. With this condition, the menu indication color may stick to the GRAY color or Windows may freeze if clicking other menu.
  • Page 6 Стр. 1 из 4 IMPORTANT NOTICE User Guide Autodesk® DWF™ Viewer is necessary to view drawings and to activate the functions of this system. Please download and install. When Windows XP SP2 is used, pop-up windows are limited by the enhanced security function and this sample may not work.

  • Page 7: Operating Environment

    Стр. 2 из 4 Operating Environment : Pentium III or higher recommended Monitor : 1024 x 768 or higher resolution recommended file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.454\32W... 02.05.2015...
  • Page 8 Стр. 3 из 4 Mouse : A mouse with wheel recommended : Microsoft Windows 2000/XP Browser Microsoft Internet Explorer 6.0 or later Drawing viewer : Autodesk DWF Viewer 6.0 * Use the software following respective license terms and conditions. Note: In case of using this service manual with network connection, allocate its folder to the client PCs as network drive to avoid any possible malfunction.
  • Page 9 Стр. 4 из 4 Layer Display Changing Function When any of the color buttons on the toolbar is clicked, it can be selected to display desired layer in its color or not to display each layer. This allows you to see the pattern layer only by setting other layers to "non-display".
  • Page 10 WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Toshiba shall not be liable for any damages, losses, expenses or costs, if any, incurred in connection with or as a result of use of any information or data provided herein.

  • Page 11: Service Mode

    Стр. 1 из 21 ADJUSTMENT Service Mode Entering to Service Mode 1. Set VOLUME to minimum and press button once on remote control. ↓ ↓ ↓ ↓ 2. Press button again and hold button down. ↓ ↓ ↓ ↓ Service Mode display 3.
  • Page 12 Стр. 2 из 21 Displaying the Adjustment Menu Press MENU button on TV. Service Mode Press ↑ ↑ ↑ ↑ ↓ ↓ ↓ ↓ Press Adjustment Mode Key Function in the Service Mode The following key entry during display of adjustment menu provides special functions. CAUTION: Never try to perform initialization unless you have changed the memory IC.

  • Page 13: Setting & Adjusting Data

    Стр. 3 из 21 Test signal selection Selection of the adjustment items (on TV or remote control) Change of the data value Volume +/- (on TV or remote control) Adjustment menu mode ON/OFF MENU button (on TV) Initialization of the memory (QA02) CALL + CH button on TV Reset the count of operating...
  • Page 14 Стр. 4 из 21 Item Name of adjustment RCUT R CUT OFF GCUT G CUT OFF BCUT B CUT OFF RDRV R DRIVE GDRV G DRIVE BDRV B DRIVE BRTC BRIGHTNESS CENTER COLC COLOR CENTER UVTT BASE BAND TINT CNTX CONTRAST MAX VOLUX MAX VOLUME LIMITED PLLW0 PLL WAIT TIME...

  • Page 15: Function Description

    Стр. 5 из 21 (Refer to Initialization of Memory Data of QA02 and setting data of signal board.) Adjusting the Data Pressing of VOLUME +/- button will change the value of data in the range from 00H to FFH. The variable range depends on the adjusting item. I2C Bus Off Turn off I2C communication between IC700 and IC400.
  • Page 16 Стр. 6 из 21 Panel option data is subject to OP4 and OP5. Enter to service mode and select menu of OPT4 or OPT5 by pressing P or P during display of adjustment menu. After selecting OPT4 or OPT5, press + or - to set OPT4 or OPT5 value as table below.
  • Page 17 Стр. 7 из 21 OPT5 (bit7) (bit6) (bit5) (bit4) (bit3) (bit2) (bit1) (bit0) AUO Panel PMVA AMVA 100 Hz Drive Panel WXGA Resolution 1080p Convert from Bit (Binary) to Hex The table for converting from bit (D7-D0) to hex (0x**). BIT (Binary) High nibble Low nibble...
  • Page 18 Стр. 8 из 21 E.g. If Bit D7-0 = 0101 1010, Hex data is 0x5A. Exit from Service Mode Pressing POWER button to turn off the TV once. Initialization of Memory Data of QA02 and Setting Data of Signal Unit After replacing QA02 or signal board, the following initialization is required.
  • Page 19 26WL66Ps/WL66Zs AUO (PMVA) 0x03 37WL66Ps/WL66Zs LPL 0x04 26WLT66s AUO (PMVA) 0x05 32WLT66s AUO (AMVA) 0x06 37WLT66s AUO (AMVA) 0x07 26WLG66s AUO (PMVA) 0x08 32WLG66s AUO (AMVA) 0x09 37WLG66s AUO (AMVA) 0x10 32WLT66s 0x11 37WLT66s 0x12 32WLG66s 0x13 37WLG66s 0x14 32WL66Ps AUO (AMVA)
  • Page 20 Стр. 10 из 21 0x23 0x24 0x25 0x26 0x27 0x28 0x29 0x30 0x31 0x32 0x33 Initializing Data setting flowchart after replacing the Signal Unit file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.056\32W... 02.05.2015...
  • Page 21 Стр. 11 из 21 Test Signal Selection file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.056\32W... 02.05.2015...

  • Page 22: Self-Diagnostic Function

    Стр. 12 из 21 Every pressing of button on the remote control changes the built-in test patterns on screen as described below in Service Mode. Picture Signal Red raster Green raster Blue raster All Black All White Self Diagnostic Function 1.
  • Page 23 Стр. 13 из 21 (1) Firmware : Version information of microprocessor Series name (AAAA) and market area (BB) and software program version (0000) (2) Time : Total hour of turn the TV on. (Unit : H) (3) Bus line : -- "OK" is normal SCL-GND (Red indication) : SCL-GND short circuit SDA-GND (Red indication) : SDA-GND short circuit SCL-SDA (Red indication) : SCL-SDA short circuit...
  • Page 24 Стр. 14 из 21 (Component/Composite) HDMI1 HDMI2 Version Check Mode 1. Press "9" button twice on remote control during display of adjustment menu in the service mode. The version of main MPU will be checked. 2. During Version Check, the following displays are shown. * Version check display and Item are subject to the models.
  • Page 25 (5) HDMI ID : HDMI ID information : Display 4 byte data. (6) SW Ver Version information of DB software as Toshiba release. (Only digital model.) (7) MW Ver Left side is Application and UI version information of DB software. (Only digital model.)
  • Page 26 Стр. 16 из 21 (8) A/D Adjust A/D adjustment item. --MAIN : It's enable only in double Window model. A/D adjustment status of main picture. --PIP : It's enable only in double Window model. A/D adjustment status of sub picture. --COMP : Component input --PC : PC input...

  • Page 27: Screen Size

    Стр. 17 из 21 * Status check display and Item are subject to the models. (1) MAIN : Main source information : Display RF position number (0 - 99) on the main screen, or Input Source (EXT1/2/3/HDMI etc.) (2) MAIN FORMAT : Display Video and PC format information (3) MAIN PLL : Main PLL information : Display 1 byte data at five.

  • Page 28: Function Description

    Стр. 18 из 21 Cinema 2 Super Live 1 Cinema 1 Subtitle 14:9 Note: Exact Scan is shown only for 1080p panel model with video input mode except pc. (8) OTHER STATUS : Other status information : Display three numbers of 2 byte data. Setting Hotel Mode Enter to service mode and select Hotel Mode menu by pressing P or P .
  • Page 29 Стр. 19 из 21 language. (Display the language only) (tuning SETUP MENU) D1 (bit1) Disable SETUP MENU Disable Enable D0 (bit0) HOTEL Mode On (Enable the setting of D1 from to D7) (Normal) VOLUX Set VOLUX as following. 1) Set speaker volume to 100. (Any value is OK, but 100 is better to check sound level.) 2) Down value of VOLUX until finding suitable sound volume level.

  • Page 30: Led Indication

    Стр. 20 из 21 D0 (bit0) Value above 100 is no effect. OPT8 FUNCTION DESCRIPTION 0 (Normal) D7 (bit7) ~ - (no use) D3 (bit3) D2 (bit2) Enable mode that picture mode will be set in Enable Disable forced when turning the main power on (Display the language only) D1 (bit1) ~...
  • Page 31 Стр. 21 из 21 file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.056\32W... 02.05.2015...

  • Page 32: Function And Operation

    Стр. 1 из 2 FUNCTION AND OPERATION The Remote Control Simple at-a-glance reference of your remote control. file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.168\32W... 02.05.2015...
  • Page 33 Стр. 2 из 2 file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.168\32W... 02.05.2015...
  • Page 34 Стр. 1 из 2 FUNCTION AND OPERATION Control and Input Connection A wide variety of external equipment can be connected to the input sockets on the side of the television. Whilst all the necessary adjustments and controls for the television are made using the remote control, the buttons on the television may be used for some functions.
  • Page 35 Стр. 2 из 2 Using the Control and Connection file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.652\32W... 02.05.2015...

  • Page 36: Tuning The Television For The First Time

    Стр. 1 из 3 FUNCTION AND OPERATION Tuning the Television for the First Time Before switching on the television put your decoder and media recorder to Standby if they are connected and ensure the aerial is connected. file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.236\32W... 02.05.2015...
  • Page 37 Стр. 2 из 3 file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.236\32W... 02.05.2015...
  • Page 38 Стр. 3 из 3 file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.236\32W... 02.05.2015...

  • Page 39: Digital - Auto Tuning

    Стр. 1 из 3 FUNCTION AND OPERATION Digital - Auto Tuning Note: As new services are broadcast it will be necessary to re-tune the television in order to view them. Auto Tuning file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.740\32W... 02.05.2015...
  • Page 40 Стр. 2 из 3 file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.740\32W... 02.05.2015...
  • Page 41 Стр. 3 из 3 file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.740\32W... 02.05.2015...

  • Page 42: Digital - Programme Sorting, Manual Tuning

    Стр. 1 из 3 FUNCTION AND OPERATION Digital - Programme Sorting, Manual Tuning Note: When the television is switched off the mode being viewed at the time will automatically be selected when the television is switched back on. Programme Sorting file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.866\32W...
  • Page 43 Стр. 2 из 3 Manual Tuning file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.866\32W... 02.05.2015...
  • Page 44 Стр. 3 из 3 file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.866\32W... 02.05.2015...
  • Page 45 Стр. 1 из 3 FUNCTION AND OPERATION Tuning Analogue Mode for the First Time The Quick Setup feature will tune all analogue channels currently available in the area. To put the television into ATV mode press and hold then use to highlight ATV.
  • Page 46 Стр. 2 из 3 file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.345\32W... 02.05.2015...
  • Page 47 Стр. 3 из 3 file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.345\32W... 02.05.2015...
  • Page 48 Стр. 1 из 5 FUNCTION AND OPERATION Analogue - Manual Tune The television can be tuned-in manually using Manual tuning. For example: if the television cannot be connected to a media recorder/decoder with a SCART lead or to tune-in a station on another System.
  • Page 49 Стр. 2 из 5 file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.897\32W... 02.05.2015...
  • Page 50 Стр. 3 из 5 file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.897\32W... 02.05.2015...
  • Page 51 Стр. 4 из 5 Using Auto Tuning file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.897\32W... 02.05.2015...
  • Page 52 Стр. 5 из 5 file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.897\32W... 02.05.2015...
  • Page 53 Стр. 1 из 3 FUNCTION AND OPERATION Analogue - Programme Skip, Sorting Programme Position Programme Skip file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.282\32W... 02.05.2015...
  • Page 54 Стр. 2 из 3 Sorting Programme Position file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.282\32W... 02.05.2015...
  • Page 55 Стр. 3 из 3 file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.282\32W... 02.05.2015...

  • Page 56: Safety Instruction

    Handling the LCD Module Стр. 1 из 4 SAFETY INSTRUCTION Handling the LCD Module Safety Precaution In the event that the screen is damaged or the liquid crystal (fluid) leaks, do not breathe in or drink this fluid. Also, never touch this fluid. Such actions could cause toxicity or skin irritation. If this fluid should enter the mouth, rinse the mouth thoroughly with water.
  • Page 57 Handling the LCD Module Стр. 2 из 4 3. If the panel surface becomes soiled, wipe with cotton or a soft cloth. If this does not remove the soiling, breathe on the surface and then wipe again. If the panel surface is extremely solied, use a CRT cleaner as a cleaner. Wipe off the panel surface by drop the cleaner on the cloth.
  • Page 58 Handling the LCD Module Стр. 3 из 4 6. CMOS-LSI circuitry is used in the LCD module, so avoid damage due to static electricity. When handling the module, use a wrist ground or anchor ground. 7. Do not expose the LCD module to direct sunlight or strong ultraviolet rays for an extended period of time.
  • Page 59 Handling the LCD Module Стр. 4 из 4 10. When transporting the LCD module, do not use packing containing epoxy resin (amine) or silicon resin (alcohol or oxim). The gas generated by these materials can cause loss of polarity. file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.169\32W... 02.05.2015...

  • Page 61: Safety Precaution

    SAFETY INSTRUCTION [LCD] ASIA, EU Стр. 1 из 4 SAFETY INSTRUCTION WARNING: BEFORE SERVICING THIS CHASSIS, READ THE "SAFETY PRECAUTION" AND "PRODUCT SAFETY NOTICE" INSTRUCTIONS BELOW. Safety Precaution WARNING: SERVICING SHOULD NOT BE ATTEMPTED BY ANYONE UNFAMILIAR WITH THE NECESSARY PRECAUTIONS ON THIS RECEIVER. THE FOLLOWING ARE THE NECESSARY PRECAUTIONS TO BE OBSERVED BEFORE SERVICING THIS CHASSIS.
  • Page 62 SAFETY INSTRUCTION [LCD] ASIA, EU Стр. 2 из 4 inflammability, voltage resistance, etc. therefore, use only replacement parts that have these same characteristics. Use only the specified parts when the mark is indicated in the circuit diagram or parts list. 7.
  • Page 63 SAFETY INSTRUCTION [LCD] ASIA, EU Стр. 3 из 4 Resistance values in orms ( ). V: Voltmeter or oscilloscope (r.m.s. or peak reading) Input resistance : Input capacitance : 200 pF Frequency range : 15 Hz to 1 MHz and d.c. respectively Note: Appropriate measures should be taken to obtain the correct value in case of non sinusoidal waveforms.

  • Page 64: Product Safety Notice

    SAFETY INSTRUCTION [LCD] ASIA, EU Стр. 4 из 4 Product Safety Notice Many electrical and mechanical parts in this chassis have special safety-related characteristics. These characteristics are often passed unnoticed by a visual inspection and the protection afforded by them cannot necessarily be obtained by using replacement components rated for higher voltage, wattage, etc.

  • Page 65: Specification

    Стр. 1 из 2 SPECIFICATION file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.842\32W... 02.05.2015...
  • Page 66 Стр. 2 из 2 file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.842\32W... 02.05.2015...
  • Page 80 Digital receiving board AV BOARD SIGNAL BOARD PANEL DDR RAM FLI8548 CORTEZ Plus w HDMI VBI Data Processor PANEL I/F DCDi Video Input Analog MADi Decoder Terminal Front Scaling (Audio) (16port) LVDS CVBS(L/R) S-VIDEO(L/R) YCbCr(L/R) Channel Standby Process uCON Digital Input A EEPROM PC_IN(L/R)

  • Page 81: Schematic Diagram

    Стр. 1 из 2 SCHEMATIC DIAGRAM Precaution WARNING: BEFORE SERVICING THIS CHASSIS, READ THE "X-RAY RADIATION PRECAUTION" FOR DIRECT VIEW CTV ONLY, "SAFETY PRECAUTION" AND "PRODUCT SAFETY NOTICE" OF THIS MANUAL. CAUTION: The international hazard symbols " " in the schematic diagram and the parts list designate components which have special characteristics important for safety and should be replaced only with types identical to those in the original circuit...
  • Page 82 Стр. 2 из 2 All capacitors are ceramic 50 V, unless otherwise noted as the following marks. = Electrolytic capacitor = Mylar capacitor 3. The parts indicated with " " have special characteristics, and should be replaced with identical parts only. 4.
  • Page 131 Accessory Стр. 1 из 1 Accessory Location Parts No. Description Y101E 75003448 MANUAL OWNERS, EURO Y130 75002113 REMOCON HAND UNIT, CT-8002 Y170 23845800 HOLDER, WIRE, NYLON66 D6.8 file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.378\32W... 02.05.2015...
  • Page 132 Cabinet Стр. 1 из 1 Cabinet Location Parts No. Description A201 75002114 FRONT BEZEL A320 75001971 PIECE, FRONT AV ASSY A330 75001968 PIECE, AC PAL A340 75001920 PIECE, BUTTON 7 KEY A380 23717240 SCREW, BITTB3X10SZN A401 75001970 BACK COVER A410 23717219 SCREW, PP3X8+SW+W SBN A411...
  • Page 133 Miscellaneous Стр. 1 из 1 Miscellaneous Location Parts No. Description B001 75003157 LCD PANEL, G6AUO32V1, T315XW02 V1 H001 23321550 TUNER, ENGF7304GF MZ01 75003427 WIRE HARNESS, LVDS, V90A00019300 P801 23372297 POWER CORD, CEE PJ22B 75002683 CONNECTOR, 1MM PITCH B TO B, 237702150K4 PP01 23845859 HOLDER, WIRE, PVC-C0AT, L=70MM...
  • Page 134 Packing Стр. 1 из 1 Packing Location Parts No. Description A701 75001973 CARTON BOX A702A 75001974 PACKING, TOP PAD A702B 75001975 PACKING, BOTTOM PAD file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.696\32W... 02.05.2015...

  • Page 135: Parts List

    Стр. 1 из 2 PARTS LIST Precaution WARNING: BEFORE SERVICING THIS CHASSIS, READ THE "X-RAY RADIATION PRECAUTION" FOR DIRECT VIEW CTV ONLY, "SAFETY PRECAUTION" AND "PRODUCT SAFETY NOTICE" OF THIS MANUAL. CAUTION: The international hazard symbols " " in the schematic diagram and the parts list designate components which have special characteristics important for safety and should be replaced only with types identical to those in the original circuit...
  • Page 136 Стр. 2 из 2 : Electrolytic : Metal Film : Fusible Resistor All CD and PF capacitors are ±5 %, 50 V and all resistor, ±5 %, 1/6 W unless otherwise noted. file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.162\32W... 02.05.2015...
  • Page 137 U01A POWER (PE0117) Стр. 1 из 4 U01A POWER (PE0117) Location Parts No. Description U01A 75003047 PC BOARD ASSY, PE0117D1, POWER C801 76503507 CAPACITOR, PLASTIC FILM, AC275V 0.22UF K C802 76503507 CAPACITOR, PLASTIC FILM, AC275V 0.22UF K C803 76503169 CAPACITOR, PLASTIC FILM, 630V 0.1UF J C804 76214103 CAPACITOR, CERAMIC DISC, 500V B 0.01UF K...
  • Page 138 U01A POWER (PE0117) Стр. 2 из 4 CE43 76567104 CAPACITOR, PLASTIC FILM, 50V 0.1UF J CE82 76676470 CAPACITOR, ELECTROLYTIC, 100V 47UF M CE85 76073178 CAPACITOR, ELECTROLYTIC, 25V 3300UF M D801 23362200 DIODE, D5SB60, 7009F07 D801B 23717240 SCREW, BITTB3X10SZN D805 23357850 DIODE, ZENER, MTZJ9.1A D806 23357893...
  • Page 139 U01A POWER (PE0117) Стр. 3 из 4 L801 23217847 TRANSFORMER, CHOKE, TPW2082AS L804 23103304 FERRITE CHOKE, TEM2011AA L805 23103304 FERRITE CHOKE, TEM2011AA L806 23248417 COIL, CHOKE, TLN3481AH L807 23248417 COIL, CHOKE, TLN3481AH L874 23103304 FERRITE CHOKE, TEM2011AA L875 23103304 FERRITE CHOKE, TEM2011AA L876 23103304 FERRITE CHOKE, TEM2011AA...
  • Page 140 U01A POWER (PE0117) Стр. 4 из 4 R821 76322689 RESISTOR, OXIDE METAL FILM, 1W 6.8 OHM J R827 76383103 RESISTOR, OXIDE METAL FILM, 2W 10K OHM J R828 76383103 RESISTOR, OXIDE METAL FILM, 2W 10K OHM J R853 76011103 RESISTOR, CHIP, 1/20W 10K OHM J R854 76011102 RESISTOR, CHIP, 1/20W 1K OHM J...
  • Page 141 U01B LOW_B (PE0117) Стр. 1 из 4 U01B LOW_B (PE0117) Location Parts No. Description U01B 75003048 PC BOARD ASSY, PE0117D2, LOW_B C851 76092538 CAPACITOR, CERAMIC CHIP, 10V F 1UF Z C852 76109102 CAPACITOR, CERAMIC CHIP, 50V B 1000PF K CE35 76567334 CAPACITOR, PLASTIC FILM, 50V 0.33UF J CE36...
  • Page 142 U01B LOW_B (PE0117) Стр. 2 из 4 DE98 23357842 DIODE, ZENER, MTZJ6.8B GE50 23103304 FERRITE CHOKE, TEM2011AA GE51 76000445 CHIP JUMPER, 1608TYPE LE52 23289049 COIL, PEAKING, TRF4330AU LE53 23248399 COIL, CHOKE, TLN3283D LE73 23248417 COIL, CHOKE, TLN3481AH P803A 23713818 SOCKET, TWG-P19X-A1 P806A 23713817 SOCKET, 127301115K2...
  • Page 143 U01B LOW_B (PE0117) Стр. 3 из 4 R852 76011471 RESISTOR, CHIP, 1/20W 470 OHM J R855 76011471 RESISTOR, CHIP, 1/20W 470 OHM J R856 76011471 RESISTOR, CHIP, 1/20W 470 OHM J R857 76011471 RESISTOR, CHIP, 1/20W 470 OHM J R858 76011471 RESISTOR, CHIP, 1/20W 470 OHM J R859...
  • Page 144 U01B LOW_B (PE0117) Стр. 4 из 4 RE95 76553122 RESISTOR, OXIDE METAL FILM, 1W 1.2K OHM J RE96 76011473 RESISTOR, CHIP, 1/20W 47K OHM J RE97 76011562 RESISTOR, CHIP, 1/20W 5.6K OHM J RE98 76011104 RESISTOR, CHIP, 1/20W 100K OHM J Z860 23144189 PROTECTOR, 20PSERIES 125V 2A...
  • Page 145 U02A AV_TERMINAL (PE0118) Стр. 1 из 7 Loading ... Location Parts No. Description U02A 75003053 PC BOARD ASSY, PE0118A1, AV_TERMINAL C101 76109103 CAPACITOR, CERAMIC CHIP, 50V B 0.01UF K C102 76762471 CAPACITOR, ELECTROLYTIC, 10V 470UF M C103 76109102 CAPACITOR, CERAMIC CHIP, 50V B 1000PF K C104 76766479 CAPACITOR, ELECTROLYTIC, 50V 4.7UF M...
  • Page 146 U02A AV_TERMINAL (PE0118) Стр. 2 из 7 C681 76668102 CAPACITOR, ELECTROLYTIC, 35V 1000UF M C682 76668102 CAPACITOR, ELECTROLYTIC, 35V 1000UF M C683 76669339 CAPACITOR, ELECTROLYTIC, 50V 3.3UF M C684 76109103 CAPACITOR, CERAMIC CHIP, 50V B 0.01UF K C685 76669010 CAPACITOR, ELECTROLYTIC, 50V 1UF M C686 76092463 CAPACITOR, CERAMIC CHIP, 16V B 0.22UF K...
  • Page 147 U02A AV_TERMINAL (PE0118) Стр. 3 из 7 CG11 76666220 CAPACITOR, ELECTROLYTIC, 16V 22UF M CG12 76666220 CAPACITOR, ELECTROLYTIC, 16V 22UF M CG13 76669100 CAPACITOR, ELECTROLYTIC, 50V 10UF M CG14 76669100 CAPACITOR, ELECTROLYTIC, 50V 10UF M CG15 76105101 CAPACITOR, CERAMIC CHIP, 50V CH 100PF J CG16 76105101 CAPACITOR, CERAMIC CHIP, 50V CH 100PF J...
  • Page 148 U02A AV_TERMINAL (PE0118) Стр. 4 из 7 CS02 76092726 CAPACITOR, CERAMIC CHIP, 10V B 2.2UF K CS03 76092726 CAPACITOR, CERAMIC CHIP, 10V B 2.2UF K CS04 76797470 CAPACITOR, ELECTROLYTIC, 50V 47UF M CS05 76092726 CAPACITOR, CERAMIC CHIP, 10V B 2.2UF K CS06 76092726 CAPACITOR, CERAMIC CHIP, 10V B 2.2UF K...
  • Page 149 U02A AV_TERMINAL (PE0118) Стр. 5 из 7 CV212 76762471 CAPACITOR, ELECTROLYTIC, 10V 470UF M CV213 76100104 CAPACITOR, CERAMIC CHIP, 25V F 0.1UF Z CV221 76092621 CAPACITOR, CERAMIC CHIP, 10V B 1UF K CV222 76092621 CAPACITOR, CERAMIC CHIP, 10V B 1UF K CV223 76100104 CAPACITOR, CERAMIC CHIP, 25V F 0.1UF Z...
  • Page 150 U02A AV_TERMINAL (PE0118) Стр. 6 из 7 DV05 23362140 DIODE, KDS160-RTK DV06 23357762 DIODE, ZENER, MA8091-M GJ41 76000445 CHIP JUMPER, 1608TYPE GJ42 76000445 CHIP JUMPER, 1608TYPE GJ44 76000445 CHIP JUMPER, 1608TYPE GR31 76000445 CHIP JUMPER, 1608TYPE GR32 76000445 CHIP JUMPER, 1608TYPE GR33 76000445 CHIP JUMPER, 1608TYPE...
  • Page 151 U02A AV_TERMINAL (PE0118) Стр. 7 из 7 Q408 23205346 TRANSISTOR, KTA2014Y/P Q409 23205347 TRANSISTOR, KTC4075Y/P Q410 23205347 TRANSISTOR, KTC4075Y/P Q630 23009942 IC, LA4525-E Q660 23205347 TRANSISTOR, KTC4075Y/P Q661 23205347 TRANSISTOR, KTC4075Y/P Q662 23205222 TRANSISTOR, SRA2204S (SOT-23) Q663 23205347 TRANSISTOR, KTC4075Y/P file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.753\32W...
  • Page 152 U02B FRONT_AV (PE0118) Стр. 1 из 1 U02B FRONT_AV (PE0118) Location Parts No. Description U02B 75003054 PC BOARD ASSY, PE0118A2, FRONT_AV C604 76109103 CAPACITOR, CERAMIC CHIP, 50V B 0.01UF K C605 76109103 CAPACITOR, CERAMIC CHIP, 50V B 0.01UF K CC11 76109102 CAPACITOR, CERAMIC CHIP, 50V B 1000PF K CC12...
  • Page 153 U02C LED (PE0118) Стр. 1 из 1 U02C LED (PE0118) Location Parts No. Description U02C 75003055 PC BOARD ASSY, PE0118A3, LED CB02 76202221 CAPACITOR, ELECTROLYTIC, 10V 220UF M CB03 76100104 CAPACITOR, CERAMIC CHIP, 25V F 0.1UF Z CB04 76100104 CAPACITOR, CERAMIC CHIP, 25V F 0.1UF Z CB05 76202221 CAPACITOR, ELECTROLYTIC, 10V 220UF M...
  • Page 154 U02D KEY (PE0118) Стр. 1 из 1 U02D KEY (PE0118) Location Parts No. Description U02D 75003056 PC BOARD ASSY, PE0118A4, KEY DA01 23362042 DIODE, ZENER, UDZS6.8B DA06 23362042 DIODE, ZENER, UDZS6.8B DA07 23362042 DIODE, ZENER, UDZS6.8B RA71 76011683 RESISTOR, CHIP, 1/20W 68K OHM J RA72 76011223 RESISTOR, CHIP, 1/20W 22K OHM J...
  • Page 155 U02E DB_DOWNLOAD (PE0118) Стр. 1 из 1 U02E DB_DOWNLOAD (PE0118) Location Parts No. Description U02E 75003057 PC BOARD ASSY, PE0118A5, DB_DOWNLOAD GR60 76000445 CHIP JUMPER, 1608TYPE PL05A 23713754 PLUG, 3P 2.5MM G, B3B-EH-F1-TV4 PL05B 23713776 PLUG, 3P 2.5MM W, S3B-EH file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.305\32W...
  • Page 156 U03AS SIGNAL (PE0119) Стр. 1 из 6 Loading ... Location Parts No. Description U03AS 75003737 PC BOARD ASSY, PE0119A1, SIGNAL C311 V03GD0000572 CHIP CERAMIC CAPACITOR (1608) C312 V03GD0000572 CHIP CERAMIC CAPACITOR (1608) C313 V03GD0000559 CHIP CERAMIC CAPACITOR (1608) C321 V03GD0000572 CHIP CERAMIC CAPACITOR (1608) C322 V03GD0000572 CHIP CERAMIC CAPACITOR (1608) C327...
  • Page 157 U03AS SIGNAL (PE0119) Стр. 2 из 6 C435 V03GD0000591 CHIP CERAMIC CAPACITOR (1608) C436 V03GD0000574 CHIP CERAMIC CAPACITOR (1608) C438 V03GD0001318 CHIP CERAMIC CAPACITOR (2012) C439 V03GD0001318 CHIP CERAMIC CAPACITOR (2012) C440 V03GD0001318 CHIP CERAMIC CAPACITOR (2012) C441 V03GD0001131 CHIP CERAMIC CAPACITOR (2012) C442 V03GD0000572 CHIP CERAMIC CAPACITOR (1608) C451...
  • Page 158 U03AS SIGNAL (PE0119) Стр. 3 из 6 C872 V03GD0001138 CHIP CERAMIC CAPACITOR (1608) C873 V03GD0001138 CHIP CERAMIC CAPACITOR (1608) C874 V03GD0000558 CHIP CERAMIC CAPACITOR (1608) C912 V03GD0001126 CHIP CERAMIC CAPACITOR (1608) C913 V03GD0000572 CHIP CERAMIC CAPACITOR (1608) C914 V03GD0000589 CHIP CERAMIC CAPACITOR (1608) C915 V03GD0000572 CHIP CERAMIC CAPACITOR (1608) C919...
  • Page 159 U03AS SIGNAL (PE0119) Стр. 4 из 6 C3416 V03GD0000572 CHIP CERAMIC CAPACITOR (1608) C3417 V03GD0000538 CHIP CERAMIC CAPACITOR (1608) C3418 V03GD0000572 CHIP CERAMIC CAPACITOR (1608) C3419 V03GD0000538 CHIP CERAMIC CAPACITOR (1608) C3420 V03GD0000572 CHIP CERAMIC CAPACITOR (1608) C3421 V03GD0000538 CHIP CERAMIC CAPACITOR (1608) C3446 V03GD0000719 CHIP CERAMIC CAPACITOR (1608) C7900...
  • Page 160 U03AS SIGNAL (PE0119) Стр. 5 из 6 C7934 V03GD0000572 CHIP CERAMIC CAPACITOR (1608) C7935 V03GD0000572 CHIP CERAMIC CAPACITOR (1608) C7936 V03GD0000572 CHIP CERAMIC CAPACITOR (1608) C7937 V03GD0000572 CHIP CERAMIC CAPACITOR (1608) C7938 V03GD0000572 CHIP CERAMIC CAPACITOR (1608) C7939 V03GD0000572 CHIP CERAMIC CAPACITOR (1608) C7940 V03GD0000572 CHIP CERAMIC CAPACITOR (1608) C7941...
  • Page 161 U03AS SIGNAL (PE0119) Стр. 6 из 6 C7976 V03GD0000572 CHIP CERAMIC CAPACITOR (1608) C7977 V03GD0000572 CHIP CERAMIC CAPACITOR (1608) C7978 V03GD0000572 CHIP CERAMIC CAPACITOR (1608) C7979 V03GD0000572 CHIP CERAMIC CAPACITOR (1608) C7980 V03GD0000572 CHIP CERAMIC CAPACITOR (1608) C7981 V03GD0000719 CHIP CERAMIC CAPACITOR (1608) C7982 V03GD0000572 CHIP CERAMIC CAPACITOR (1608) C7983...

Table of Contents