Toshiba SR-V10 Service Data page 3

i
TOP COVER 8 PEMOY AL
1. Remove two screws (A) on both sides.
2. Remove four screws on back plate, and the top
cover will be removed from unit.
Figure 3
eB MECHANISM & P.C. BOARD REMOVAL
1. Remove six screws (C) on bottom plate, and the
mechanism & P.C. Board will be removed from
shassis.
P.C. BOARD CHECK
1. Remove bottom plate by removing three screws (D)
fixing bottom plate for P.C. Board, and the P.C.
Board, and the P.C. Board will be checked.
ae
30 x 4mm
Figure 4
Figure 5
Figure 6
Figure 7