Cpu - Power Management Control - ADLINK Technology VPX3-TL BIOS User Manual

3.2.1 CPU – Power Management Control
Advanced
CPU – Power Management Control
Boot performance mode
Intel(R) SpeedStep(tm)
Race To Halt (RTH)
Intel(R) Speed Shift Technology
Per Core P State OS control mode
HwP Autonomous Per Core P State
HwP Autonomous EPP Grouping
EPB override over PECI
HwP Fast MSR Support
HDC Control
Turbo Mode
> View/Configure Turbo Options
> Config TDP Configurations
> CPU VR Settings
Platform PL1 Enable
Platform PL1 Power
Platform PL1 Time Window
Platform PL2 Enable
Platform PL2 Power
Power Limit 4 Override
C states
Thermal Monitor
Interrupt Redirection Mode Selection
Timed MWAIT
> Custom P-state Table
Energy Performance Gain
EPG DIMM Idd3N
EPG DIMM Idd3P
> Power Limit 3 Settings
> CPU Lock Configuration
BIOS Item
Boot performance mode
Intel(R) SpeedStep(tm)
Race To Halt (RTH)
Aptio Setup – AMI
[Turbo Performance]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Disabled]
[Enabled]
[Enabled]
[Disabled]
[Enabled]
50000
[0]
[Enabled]
55000
[Disabled]
[Disabled]
[Enabled]
[Fixed Priority]
[Disabled]
[Disabled]
Options
Max Battery
Max Non-Turbo
Performance
Turbo Performance
Enabled
Disabled
Enabled
Disabled
12
CPU – Power Management
Control Options
><: Select Screen
^v: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F8: Previous Values
F9: Optimized Default
F10: Save & Exit
ESC: Exit
Description
Select the performance state that the BIOS
will set starting from reset vector.
Allows more than two frequency ranges to
be supported.
Enable/Disable Race To Halt feature. RTH
will dynamically increase CPU frequency in
order to enter pkg C-State faster to reduce
overall power. (RTH is controlled through
VPX3-TL BIOS