Sony KD-55XD9305 Service Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. LCD TV
  5. Bravia KD-55XD9305
  6. Service manual

Sony KD-55XD9305 Service Manual

Hide thumbs Also See for KD-55XD9305:
Table of Contents

Advertisement

Quick Links

SERVICE MANUAL
GN2SK
CHASSIS
ORIGINAL MANUAL ISSUE DATE: 2/2016
Segment: QF
Version
Date
Subject
1.0
2/2016
Original manual issue.
LCD TV
9-888-588-01

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the KD-55XD9305 and is the answer not in the manual?

Questions and answers

Related Manuals for Sony KD-55XD9305

Summary of Contents for Sony KD-55XD9305

  • Page 1 SERVICE MANUAL GN2SK CHASSIS ORIGINAL MANUAL ISSUE DATE: 2/2016 Segment: QF Version Date Subject 2/2016 Original manual issue. LCD TV 9-888-588-01...

  • Page 2: Model List

    MODEL LIST MODEL COLOR COMMANDER DEST. MODEL COLOR COMMANDER DEST. KD-55XD9305 Black RMF-TX200E CEI/UKA/RU3 KD-65XD9305 Black RMF-TX200E CEI/UKA/RU3 KD-55/65XD9305...

  • Page 3: Warnings And Cautions

    Components identified by shading and ! mark on the schematic diagrams, exploded views, and in the parts list are critical for safe operation. Replace these components with Sony parts whose part numbers appear as shown in this manual or in supplements published by Sony. Circuit adjustments that are critical for safe operation are identified in this manual.
  • Page 4 Ne les remplacer que par des composants Sony dont le numero de piece est indique dans le present manuel ou dans des supplements publies par Sony. Les reglages de circuit dont l’importance est critique pour la securite du fonctionnement sont identifi es dans le present manuel.

  • Page 5: Use Caution When Handling The Lcd Panel

    WARNINGS AND CAUTIONS USE CAUTION WHEN HANDLING THE LCD PANEL When repairing the LCD panel, be sure you are grounded by using a wrist band. When repairing the LCD panel on the wall, the LCD panel must be secured using the 4 mounting holes on the rear cover. Do not press on the panel or frame edge to avoid the risk of electric shock.

  • Page 6: Safety Check-Out

    SAFETY CHECK-OUT After correcting the original service problem, perform the following safety checks before releasing the set to the customer: 1. Check the area of your repair for unsoldered or poorly soldered connections. Check the entire board surface for solder splashes and bridges. 2.
  • Page 7 SAFETY CHECK-OUT Leakage Test The AC leakage from any exposed metal part to earth ground and from all exposed metal parts to any exposed metal part having a return to chassis, must not exceed 0.5 mA (500 microamperes). Leakage current can be measured by any one of three methods. 1.

  • Page 8: Self Diagnosis Function

    SELF DIAGNOSIS FUNCTION The units in this manual contain a self-diagnostic function. If an error occurs, the Smart Core Red LED will automatically begin to flash. The number of times the LED flashes translates to a probable source of the problem. A definition of the Smart Core Red LED flash indicators is listed in the instruction manual for the user’s knowledge and reference.
  • Page 9 SELF DIAGNOSIS FUNCTION [SELF DIAGNOSTIC SCREEN DISPLAY] Error Naming Error count SELF CHECK Format of error timestamps YYMMDDhhmmss (in UTC) Back << Example: MAIN_POWER 000000000000 000000000000 000000000000 120823132523 -> Aug 23 2012 13:25:23 UTC DC_ALERT 000000000000 000000000000 000000000000 * Only when time is set, an error timestamp AUD_ERR 150101000018 150101000018...

  • Page 10: How To Enter Service Mode

    ADJUSTMENT HOW TO ENTER SERVICE MODE 1) Turn on the main power switch to place the set in standby mode. 2) Press the buttons on the remote commander as follows, and entering service mode. 3) Service mode display. Service Mode >>...

  • Page 11: Software Version

    ADJUSTMENT SOFTWARE VERSION 1) In Service Mode, select “Model Information”, press “Enter” or “→” button to enter Status Information. Main Micro Service Mode Model SW Version: PKG2.011.0010NAB NVM Version: 0001 UC2 >> Model Information Boot Version: V1.000 Self diagnosis History >>...

  • Page 12: Serial Number Edit

    ADJUSTMENT SERIAL NUMBER EDIT (1) 1) In “Service Mode”, select “Model Information” by pressing “↑” or “↓” then pressing “Enter” or Service Mode “→” button to enter inside. >> Model Information Self diagnosis History >> 2) Select “Serial Number Edit” by pressing “↑” or “↓” button then pressing “→” button. Video / Audio >>...
  • Page 13 ADJUSTMENT SERIAL NUMBER EDIT (2) YES is selected, the input data is saved into EEPROM. Service Mode SERIAL NUMBER EDIT is greyed out and the serial number that has been input is displayed. >> Status Information User will not able to edit anymore.

  • Page 14: Model Number Setting

    ADJUSTMENT MODEL NUMBER SETTING 1) In “Service Mode”, select “Model Information” by pressing “↑” or “↓” then pressing “Enter” or “→” button to enter inside. 2) Select “Model Number Setting” by pressing “↑” or “↓” button then pressing “Enter” or “→” button. 3) Press “↑”...
  • Page 15 ADJUSTMENT WB ADJUSTMENT (Please apply when the Main board or panel is replaced.) c. To change data , press “←” or “→” on remote commander. In “Panel/PQ” service mode. a. Go to “WB Adjustment” category by “↑” or “↓”. << Back <[ ]>...
  • Page 16 ADJUSTMENT 2. In “WB/Mura/CUC data transfer”. WB/MURA/CUC DATA TRANSFER (Please apply when the Main board or panel is replaced.) a. Select “WB/Gamma data transfer” by pressing “↑” or “↓” on remote commander. 1. In “Panel/PQ” service mode. b. To change the items, press “←” or “→” on remote commander and press “Enter” a.
  • Page 17 ADJUSTMENT HDD PERFORMANCE CHECK 1. In “Service Mode”, select “General Setting” by pressing “↑” or “↓” then 3. A message "Please wait ..." is displayed during performance check processing. pressing “Enter” or “→” button to enter inside. Service Mode Service Mode Model Information >>...
  • Page 18 ADJUSTMENT HDD RE-REGISTRATION 1) In “Service Mode”, select “General Setting” by pressing “↑” or “↓” then pressing “Enter” or “→” button to enter inside. 2) Select “AAA” by pressing “↑” or “↓” then pressing “Enter” or “→” button to enter inside. Service Mode General Setting Model Information...

  • Page 19: Usb Update

    USB UPDATE *Please refer to another manual “Service Procedure for Panel, Board and Software Change / Upgrade(P/N:98881800x)” for details. GN2SK chassis is the same as GN1T chassis basically. 1:Download USB image and unzip file. 2: copy unzip file to USB memory root folder. 3: USB memory insert TV.

  • Page 20: Troubleshooting

    TROUBLE SHOOTING TRIAGE Confirm the symptom from the customer. Select that symptom from the chart. Bring all the boards and cables listed for that symptom. Follow the troubleshooting charts in the technical guides to isolate the board. Chart Color Code. RED DOT: Most likely defective part BLUE TRIANGLE: Secondary possible defective part BLACK TEXT: Board that may correct the symptom...
  • Page 21 TROUBLE SHOOTING FLOW 1-1. NO POWER with G* board with AC-ADP No Power No Power Check 24V Check STBY 3.3V Replace LD Board Replace C485 C484 Between LD Board to Between G* Board to G* Board near CN401 near CN401 DPS Board Harness AC Adaptor DPS Board Harness...
  • Page 22 TROUBLE SHOOTING FLOW 1-2-1. NO POWER U-COM FAILURE START Check MAIN_VCC Check 12.5V Line R9175 Voltage. Check C9117 Voltage. Check +3.3V_STBY (G board or IC403 on DPS). Is the voltage >1.6V? Is the voltage >3.0V? C9006, CN9000 #24pin Check P_ON_VBUS Check C9129 Voltage.
  • Page 23 TROUBLE SHOOTING FLOW 1-2-1. NO POWER U-COM FAILURE 1-2-2. NO POWER DC_OFF_DET CHECK from the previous page START Check DC_OFF_DET Check P_ON_#2 R9035 IC9017 #pin14 Change IC9017 ( IC9000 is working OK ) Is voltage < 3V? Is the voltage >3.0V? Check Vdd Check ORESETB Change IC9000...
  • Page 24 TROUBLE SHOOTING FLOW 1-3. NO POWER DDCON/LDO DDCONs check START Check fuse F9xxx / F4xx Change Fuse Is fuse OK? Check Vcc voltage Check POWER_ON IC9017 #pin19 C9xxx / C4xx (Refer 1-2 No Power U-Com Failure) Is voltage >12.0V? 1-2 No Power U-Com Failure Check Enable pin voltage Is voltage >2.5V?
  • Page 25 TROUBLE SHOOTING FLOW 1-3. NO POWER DDCON/LDO DDCON check START Check IC9001 Vcc voltage Check Vcc voltage Check Change D9000 C9033 C9061 D9000 Is voltage >12V? Is voltage >3V? Is diode ? Check +3.3V_STBY. G board or IC408 on DPS Check Vcc voltage Check Change D9001...
  • Page 26 TROUBLE SHOOTING FLOW 1-3. NO POWER DDCON/LDO LDOs check START Check Vcc voltage Check +3.3V_DDC_OUT C9xxx DDCON (IC409) Is voltage >3V? Check Enable pin voltage 1-2 No Power U-Com Failure Is voltage >3V? Change LDO IC KD-55/65XD9305...
  • Page 27 TROUBLE SHOOTING FLOW 2-1. LED BLINKING 2X (MAIN POWER ERROR) with G* board with AC-ADP 2-time blinking 2-time blinking Check +12V_REG Check +12V_REG at pin 11/13 of on B Board at pin 11/13 of on B Board (CN9000 BM1), (CN9000 BM1), Voltage >...
  • Page 28 TROUBLE SHOOTING FLOW 2-2. LED BLINKING 3X 2-3. LED BLINKING 4X (LED VOLTAGE ERROR) DC_ALERT AUDIO ERROR LED 3x blinking 4-time blinking LED 3x blinking Check +5.0V_VBUS IC9014,etc at pin1 in IC8001, 4.959V See other flow Audio Error ? Check (B* Board) Between 0.898V to 2.997V <Voltage<5.285V?
  • Page 29 TROUBLE SHOOTING FLOW 2-4. LED BLINKING 5X (PANEL COMMUNICATION ERROR) 5-times blinking Check Change “+12.5V_TCON” at G-Board is Change Replace G-Board Panel (or T-con) CN401 #4 (or C493) suspicious on the DPS-Board Symptom Symptom improvement improvement Symptom improve Replace the Harness DPS is Panel (or T-Con) is Harness is...
  • Page 30 TROUBLE SHOOTING FLOW 2-5. LED BLINKING 6X (BACKLIGHT ERROR) 6-times blinking Harness / Connection Symptom Check Voltage of Voltage ≥ 1.85 V Check broken Improvement BL_ERR_DET Change harness/connection Harness on 21pin of CN401 harness G/LD* board to DPS Board on DPS improvement Symptom Harness /...
  • Page 31 TROUBLE SHOOTING FLOW 2-6. LED BLINKING 7X (TEMPERATURE ERROR) 7-time blinking Setting circumstance is OK? Set to another Temperature, location, etc. Ventilation, etc. Change B* Board, improvement and Aging a few Panel hours Symptom improvement Check I2C_C bus Temp sensor B* Board NG communication OK? IC1400...
  • Page 32 TROUBLE SHOOTING FLOW 3-1. NO SOUND No Sound Without LED 3x No sound only Go to Analog RF and Digital RF ? 3-6 No Sound Tuner Select [External Inputs] AV receiver is connected [BRAVIA Sync Settings] to HDMI in ? [BRAVIA Sync Control] [off] Go to...
  • Page 33 TROUBLE SHOOTING FLOW 3-2. NO SOUND (AUDIO) 3-3. NO SOUND (POWER OFF CHECK) No Sound Power Off Check Power Off Check Audio From 2-2 From 3-1 Measure the Speaker (1) B / DPS Board impedance by multi-meter Replace Speaker PVDD-GND short ? Less than 3Ω...
  • Page 34 TROUBLE SHOOTING FLOW 3-4. NO SOUND (POWER ON CHECK) Power On Check From 2-2 (4) POWER_AU check POWER_AU is supplied to B / DPS Board for a moment before LED 3x blinking ? Replace G Board BMFW2 Board OK ? (4) POWER_AU check Measure voltage between PVDD and GND at capacitor C7881.
  • Page 35 TROUBLE SHOOTING FLOW 3-5. NO SOUND (AUDIO HP/AUDIO OUT) No Sound Audio HP/Audio out [Sound] [Headphone] Headphone Volume [Headphone/Audio out] Increase Headphone Volume is set to MIN? is set to ? Replace B Board [Audio Out (Fixed)] Replace B Board [Audio Out (Variable)] Volume Increase Volume...
  • Page 36 TROUBLE SHOOTING FLOW 3-6. NO SOUND (TUNER) This troubleshooting is only for Analog No Sound with normal picture Only RF tuner input? Please refer Audio Check IC1000 (SOC) troubleshooting KD-55/65XD9305...
  • Page 37 TROUBLE SHOOTING FLOW 3-7. NO SOUND (HDMI1/2/3/4) No Sound Check the picture Refer to 4-5 HDMI NO PICTURE Does this model have Connect Stereo mini-jack cable between Source and the TV, and Check the mode Analog Audio In of Source equipment Change “HDMI/DVI Audio Source”...
  • Page 38 TROUBLE SHOOTING FLOW 4-1. NO PICTURE BL_ON (L or H): No Picture IC9017 #18pin (for 4K BMFW2/BM1 board) BL_ON : H Check Smart Core Check Replace Got Any Normal Replace LCD Panel Behavior BL_ON the V by One FFC Display? the main Board (or T-CON) (5x Blinking)
  • Page 39 TROUBLE SHOOTING FLOW 4-2. NO PICTURE (VIDEO) (AEP) No Picture AEP SCART CVBS SCART RGB No Picture No Picture [LOW: [LOW: Check SCART_FB Check SCART_FB Detailed check all parts Check CN7501 Check CN7501 IC1000 L37 IC1000 L37 at SCART_FB signal Connection Connection [SOY0] at R7514...
  • Page 40 TROUBLE SHOOTING FLOW 4-3. NO PICTURE (COMPONENT) (AEP) No Picture AEP Video 2 Component No Picture No Picture Check J7504 Con Check J7504 NG (Vpp: 0V) Check if input OSD Check if input OSD NG (Vpp: 0V) VIDEO_DET at Connection, is GREY OUT is GREY OUT R7539,...
  • Page 41 TROUBLE SHOOTING FLOW 4-4. NO PICTURE (@ TUNER) RF input no picture / noisy picture Note: I2C line for all tuners except Japan_SKP - Parts for I2C_A_SDA line: R6001, C6004. Check RF source cable Change RF cable and antenna - Parts for I2C_A_SCL line: R6002, C6005. and antenna, OK? I2C line for Japan_SKP - Parts for I2C_D_SDA line: R6003,C6006...
  • Page 42 TROUBLE SHOOTING FLOW 4-4. NO PICTURE (@ TUNER) (1) FOR 12V LNB Voltage Checking 12V LNB Voltage Checking Check Tuner power line Check P_ON_LNB signal line MOSFET Q9019 Check fuse F6000 12V at JL9012 = 12V? at R9167 = 3.3V? broken Please refer DDCON troubleshooting...
  • Page 43 TROUBLE SHOOTING FLOW 4-4. NO PICTURE (@ TUNER) (2) FOR ANALOG TUNING For LA-ISDB(BR/AR), LA-T2(COL) and TW only Note: Analog Tuning - Parts for IFOUT_N line: R6007, FB6002, C6008, R6327, C6301, R6301. - Parts for IFOUT_P line: R6008, FB6003, C6009, R6326, C6300, R6300. For Other destination - Parts for IFAGC line: R6072, R6009, R6010, R6069, C6302, R6303.
  • Page 44 TROUBLE SHOOTING FLOW 4-4. NO PICTURE (@ TUNER) (3) FOR DIGITAL TUNING Digital Tuning 2 For LA-ISDB(BR) and LA-T2(COL) only For JP_SKP For AEP-W For PA_T2 and CH/HK only Confirm ANT or Cable connection Confirm ANT or Satellite connection Confirm ANT or Satellite connection BS/CS or SKP_Opticast/ Digital cable/ Terrestrial SKP_Premium or terrestrial...
  • Page 45 TROUBLE SHOOTING FLOW 4-5. NO PICTURE (HDMI) (1) HDMI1 No Picture Check the below point at All lines are NG Connector side Other Input is OK Check other - Check +5V line Replace - Check HPD line CN5201 HDMI input - Check DDC lines All Inputs are NG Voltage NG...
  • Page 46 TROUBLE SHOOTING FLOW 4-5. NO PICTURE (HDMI) (2) HDMI2 No Picture Check the below point at All lines are NG Connector side Other Input is OK Check other - Check +5V line Replace HDMI input - Check HPD line CN5202 - Check DDC lines All Inputs are NG Voltage NG...
  • Page 47 TROUBLE SHOOTING FLOW 4-5. NO PICTURE (HDMI) (3) HDMI3 No Picture Check the below point at All lines are NG Connector side Other Input is OK Check other - Check +5V line Replace HDMI input - Check HPD line CN5203 - Check DDC lines All Inputs are NG Voltage NG...
  • Page 48 TROUBLE SHOOTING FLOW 4-5. NO PICTURE (HDMI) (4) HDMI4 No Picture Check the below point at All lines are NG Connector side Other Input is OK Check other - Check +5V line Replace HDMI input - Check HPD line CN5208 - Check DDC lines All Inputs are NG Voltage NG...
  • Page 49 TROUBLE SHOOTING FLOW 5. KEY SWITCH BUTTONS ERROR Check harness connection Side key buttons error between B-board and Harness connection issue switch module Change harness between B-board to switch module B-board to switch module harness issue harness Change switch module Switch module issue Check resistor value on B- Resistor value...
  • Page 50 TROUBLE SHOOTING FLOW 6. IR REMOTE COMMANDER ERROR Center white LED blinks Battery of remote commander IR remote commander does not when pushing buttons of could be weak. remote commander at close respond Change battery. to IR sensor. Check harness connection Harness connection between B-board and issue...

  • Page 51: Light Sensor Error

    TROUBLE SHOOTING FLOW 7. LIGHT SENSOR ERROR Setting is “ON” Backlight level does not Check UI setting and Check harness Battery of remote commander change when ambient light make sure light sensor connection between B- could be weak. changed setting is “ON” board and SmartCore Change battery.
  • Page 52 TROUBLE SHOOTING FLOW 8. NETWORK MALFUNCTION (1) Ethernet (Wired) [Network Set-up] >[Wired Set-up] on the TV Connection Results Connection Results Connection Results B board Cable Connection Local Access Internet Access Failed Failed Failed Auto Check Proxy setting B board Wired Set-up Check cable Local router CN8003...
  • Page 53 TROUBLE SHOOTING FLOW 8. NETWORK MALFUNCTION (2) Internal Wireless Network malfunction Wireless Network Is the radio field on the TV Strength too weak Bxx Board or even No signal? Error Message appear when the Wireless Network is selected? Change WiFi module Access Point Hardware defect suspected.

  • Page 54: Bluetooth Malfunction

    TROUBLE SHOOTING FLOW 9. BLUETOOTH MALFUNCTION Touch pad Remote doesn’t work 3D-glasses (Active) doesn’t work Bluetooth Speaker/Headphone/Headset doesn’t work Please refer Touch pad Remote manual Home > Settings > Check BT antenna 3D-glasses (Active) manual Bluetooth Settings Connection is OK Can read Bluetooth Speaker/Headphone/Headset operation manual Near discoverable...
  • Page 55 TROUBLE SHOOTING PCB PARTS MAP BM1 (A side view) cam008 cam203 cam007 cam013 cam012 cam010 cam011 cam009 CN5201 J7700 J1401 CN7703 J7505 CN8005 CN8002 CN8000 CL1403 cam104 cam211 R1516 CN8003 IC1407 cam102 R1447 R1449 cam086 CL5222 RB5231 RB5232 VD5201 R5523 R1513 R1515 cam001...
  • Page 56 TROUBLE SHOOTING PCB PARTS MAP BM1 (B side view) KJ004 KJ003 cam012 cam011 cam202 JL7865 JL7869 JL7870 JL7872 JL7878 KB001 IRM003 JL7863 JL7862 JL6029 JL7841 JL7843 JL7845 JL7853 JL7860 JL7840 JL7857 JL7838 JL7877 JL7856 JL7847 JL8705 JL9009 JL7861 JL5212 JL8702 JL6005 JL7835 JL7839...
  • Page 57 TROUBLE SHOOTING PCB PARTS MAP DPS (A side view) cam10014 cam10014 cam015 cam006 cam015 cam006 cam12 cam036 cam004 cam12 cam036 cam004 cam003 cam001 R474 C471 R470 R474 C471 R470 D401 cam005 D401 cam22 R469 cam22 R469 R3622 R3623 R3312 R8713 R473 C472 R471...
  • Page 58 TROUBLE SHOOTING PCB PARTS MAP DPS (B side view) KJ004 KJ003 cam008 KB001 JL7703 JL7703 IRM003 JL3602 JL3602 JL7700 JL7700 JL7707 JL7707 JL7701 JL7702 JL3600 JL7701 JL7702 JL3600 JL7704 JL7705 JL7706 JL201 JL202 JL203 JL204 JL205 JL206 JL7704 JL7705 JL7706 JL201 JL202 JL203...

  • Page 59: Block Diagram

    DIAGRAMS BLOCK DIAGRAM KD-55/65XD9305...

  • Page 60: Connector Diagram

    DIAGRAMS CONNECTOR DIAGRAM 1. KD-55XD9305 BAX_F T-con CN8701 CN8700 CN3601 To BMFW CN203 Board 1-798-510-31 HUS_GND VBTX11P VBTX11P VBTX7P RxP7 HUS_KEY_AD VBTX7N RxN7 VBTX11N VBTX11N HUS_POWER_KEY 1-821-900-11 VBTX6P RxP6 PANEL FFC 1-822-693-11 VBTX10P VBTX10P JAM SZ15-03WLR VBTX10N VBTX10N VBTX6N RxN6...
  • Page 61 DIAGRAMS CONNECTOR DIAGRAM 2. KD-65XD9305 BAX_F BAX_F T-con CN8701 CN8700 CN3601 To BMFW CN203 Board 1-798-510-31 HUS_GND VBTX11P VBTX11P VBTX7P RxP7 HUS_KEY_AD VBTX7N RxN7 VBTX11N VBTX11N HUS_POWER_KEY 1-821-900-11 VBTX6P RxP6 PANEL FFC 1-822-693-11 VBTX10P VBTX10P JAM SZ15-03WLR VBTX10N VBTX10N VBTX6N RxN6 VBTX9P VBTX9P...
  • Page 62 DIAGRAMS BOARDS LOCATION KD-55XD9305 KD-65XD9305 SMART CORE (S) SWITCH UNIT SMART CORE (S) SWITCH UNIT SMART CORE (S) WLAN / BT MODULE(11AC) HSC4-S KD-55/65XD9305...

  • Page 63: Wire Dressing

    WIRE DRESSING Overview KD-55XD9305 KD-65XD9305 VA Tape VA Tape ・Fix wire ・Fix wire Harness Tie x3 Harness Tie x4 • Fix wire • Fix wire Slide Clamp x2 Slide Clamp x1 • Hold wires • Hold wires KD-55/65XD9305...
  • Page 64 PANEL HANDLING ON WORKING TABLE *TV set handling is same as Panel basically. KD-55/65XD9305...
  • Page 65 PANEL HANDLING LIFTING UP *TV set handling is same as Panel basically. Shift the panel to hold Bottom side Hold Bottom side (Don’t slip the panel) Lift up Top side Flip up to vertical position Recommended holding position (Refer to following pages for detail) KD-55/65XD9305...
  • Page 66 PANEL HANDLING HOLDING ON HORIZONTAL POSITION *TV set handling is same as Panel basically. KD-55/65XD9305...
  • Page 67 PANEL HANDLING HOLDING ON VERTICAL POSITION & MOVING *TV set handling is same as Panel basically. KD-55/65XD9305...
  • Page 68 PANEL HANDLING HOLDING ON VERTICAL POSITION & MOVING (TV set only) KD-55/65XD9305...
  • Page 69 PANEL HANDLING BACK UP *TV set handling is same as Panel basically. KD-55/65XD9305...
  • Page 70 DISASSEMBLY • There are clutch in the yellow frame[ ]. Therefore please be careful in the case of the disassembly or assembly of parts. 1. KD-55XD9305 1-1. STAND CENTER COVER 4 Screws (SCREW, +PSW M5 X12) P/N: 2-580-607-01 STAND COVER...
  • Page 71 DISASSEMBLY 1. KD-55XD9305 1-2. LABEL, REAR TERMINAL (GNT) AND LABEL, DC IN (GNT) LABEL, REAR TERMINAL (GNT) LABEL, DC IN (GNT) KD-55/65XD9305...
  • Page 72 DISASSEMBLY 1. KD-55XD9305 1-3. CLAMP, CABLE (GNT L) CLAMP, CABLE (GNT L) CLAMP, CABLE (GNT L) KD-55/65XD9305...
  • Page 73 DISASSEMBLY 1. KD-55XD9305 1-4. COVER, SIDE (GNT) AND SCREW CAP (GNT) COVER, SIDE (GNT) SCREW CAP (GNT) KD-55/65XD9305...
  • Page 74 DISASSEMBLY 1. KD-55XD9305 Note: 1-5. REAR COVER (L GNT) A Before taking off Rear Cover, you have to slide BRACKET-SLIDE of both sides to the top side. Please refer to Appendix-1. 4 screws (SCREW, ORNAMENTAL M6X12) P/N: 4-268-126-02 2 screws (JOINT, SCREW) P/N: 4-400-043-11...
  • Page 75 DISASSEMBLY 1. KD-55XD9305 1-5. REAR COVER (L GNT) A NOTES: When re-assembling REAR COVER (L GNT) A KD-55/65XD9305...
  • Page 76 DISASSEMBLY 1. KD-55XD9305 1-6. CATCHER CATCHER KD-55/65XD9305...
  • Page 77 DISASSEMBLY 1. KD-55XD9305 1-7. COVER, UNDER (GNT) A AND BRACKET, DC JACK (GNT) COVER, UNDER (GNT) A BRACKET, DC JACK (GNT) KD-55/65XD9305...
  • Page 78 DISASSEMBLY 1. KD-55XD9305 1-8. TAPE TAPE TAPE TAPE TAPE TAPE KD-55/65XD9305...
  • Page 79 DISASSEMBLY 1. KD-55XD9305 1-9. SP-BOX ASSY (W12-L CH-ND) SP-BOX ASSY (W12-L CH-ND) KD-55/65XD9305...
  • Page 80 DISASSEMBLY 1. KD-55XD9305 1-10. TAPE AND WIRE DRESSING TAPE TAPE TAPE KD-55/65XD9305...
  • Page 81 DISASSEMBLY 1. KD-55XD9305 1-11. TAPE TAPE TAPE TAPE TAPE KD-55/65XD9305...
  • Page 82 DISASSEMBLY 1. KD-55XD9305 1-12. SP-BOX ASSY (W12-R CH-ND) SP-BOX ASSY (W12-R CH-ND) KD-55/65XD9305...
  • Page 83 DISASSEMBLY 1. KD-55XD9305 1-13. TAPE AND BT ANTENNA TAPE TAPE TAPE BT ANTENNA Screw (SCREW, +PSW M3X6) P/N: 4-472-518-11 KD-55/65XD9305...
  • Page 84 DISASSEMBLY 1. KD-55XD9305 1-14. WIRE DRESSING KD-55/65XD9305...
  • Page 85 DISASSEMBLY 1. KD-55XD9305 NOTES: 1-15. SMART CORE (S) For This For This Model Model HARNESS ASSY (MAIN) SMART CORE (S) KD-55/65XD9305...
  • Page 86 DISASSEMBLY 1. KD-55XD9305 1-16. TSI AND BRACKET, TS Screw (SCREW, +PSW M3X6) P/N: 4-472-518-11 BRACKET, TS Screw (SCREW, +PSW M3X6) P/N: 4-472-518-11 KD-55/65XD9305...

  • Page 87: Switch Unit

    DISASSEMBLY 1. KD-55XD9305 1-17. SWITCH UNIT NOTE: When passing harness into the slit SWITCH UNIT HARNESS ASSY (MAIN) KD-55/65XD9305...
  • Page 88 DISASSEMBLY 1. KD-55XD9305 1-18. HARNESS ASSY (MAIN) AND HOLDER SIDE SW (GNT L M1) Screw (SCREW, +LH M3X2.1 STEP (GNT)) P/N: 4-586-665-01 HARNESS ASSY (MAIN) P/N: 1-910-111-07 HOLDER SIDE SW (GNT L M1) KD-55/65XD9305...
  • Page 89 DISASSEMBLY 1. KD-55XD9305 1-19. TAPE AND CONNECTOR ASSY 10P TAPE CONNECTOR ASSY 10P P/N: 1-910-111-21 KD-55/65XD9305...
  • Page 90 DISASSEMBLY 1. KD-55XD9305 1-20. TAPE AND CONNECTOR ASSY 30P TAPE TAPE CONNECTOR ASSY 30P P/N: 1-910-111-08 KD-55/65XD9305...
  • Page 91 DISASSEMBLY 1. KD-55XD9305 1-21. TAPE AND FLEXIBLE FLAT CABLE 30P TAPE TAPE TAPE FLEXIBLE FLAT CABLE 30P P/N: 1-910-111-05 KD-55/65XD9305...
  • Page 92 DISASSEMBLY 1. KD-55XD9305 1-22. FLEXIBLE FLAT CABLE 51P AND FLEXIBLE FLAT CABLE 41P FLEXIBLE FLAT CABLE 51P P/N: 1-849-325-11 FLEXIBLE FLAT CABLE 41P P/N: 1-849-319-11 KD-55/65XD9305...
  • Page 93 DISASSEMBLY 1. KD-55XD9305 1-23. TAPE TAPE TAPE TAPE TAPE KD-55/65XD9305...
  • Page 94 DISASSEMBLY 1. KD-55XD9305 1-24. FLEXIBLE FLAT CABLE 30P(BD) AND FLEXIBLE FLAT CABLE 51P FLEXIBLE FLAT CABLE 30P (BD) P/N: 1-910-111-06 FLEXIBLE FLAT CABLE 51P P/N: 1-849-326-11 KD-55/65XD9305...
  • Page 95 DISASSEMBLY 1. KD-55XD9305 1-25. TAPE AND CONNECTOR ASSY 20P TAPE CONNECTOR ASSY 20P P/N: 1-910-111-09 KD-55/65XD9305...
  • Page 96 DISASSEMBLY 1. KD-55XD9305 1-26. BRACKET, SLIDE (L) (L GNT) 3 screws (SCREW, +LH M3X2.1 STEP (GNT)) P/N: 4-586-665-01 BRACKET, SLIDE (L) (L GNT) KD-55/65XD9305...
  • Page 97 DISASSEMBLY 1. KD-55XD9305 1-27. BRACKET, SLIDE (R) (L GNT) 3 screws (SCREW, +LH M3X2.1 STEP (GNT)) P/N: 4-586-665-01 BRACKET, SLIDE (R) (L GNT) KD-55/65XD9305...
  • Page 98 DISASSEMBLY 1. KD-55XD9305 1-28. TOP COVER (L GNT) 7 screws (SCREW, +PSW M3X6) P/N: 4-472-518-11 TOP COVER (L GNT) KD-55/65XD9305...
  • Page 99 DISASSEMBLY 1. KD-55XD9305 1-29. SLIDE, CLAMP AND BRACKET, INSIDE (GNT) SLIDE, CLAMP SLIDE, CLAMP BRACKET, INSIDE (GNT) KD-55/65XD9305...
  • Page 100 DISASSEMBLY 1. KD-55XD9305 1-30. BRACKET, SIDE (GNT) BRACKET, SIDE (GNT) KD-55/65XD9305...
  • Page 101 DISASSEMBLY 1. KD-55XD9305 1-31. BRACKET, TOP (GNT) BRACKET, TOP (GNT) KD-55/65XD9305...
  • Page 102 DISASSEMBLY 1. KD-55XD9305 1-32. BM1 8 screws (SCREW, +PSW M3X6) P/N: 4-472-518-11 KD-55/65XD9305...
  • Page 103 DISASSEMBLY 1. KD-55XD9305 1-33. LABEL, INSIDE TERMINAL (GNT) AND LABEL, SIDE TERMINAL (GNT) When you do panel replacement, When you do panel replacement, please also replace this part at the same time to a new one. please also replace this part at the same time to a new one.
  • Page 104 DISASSEMBLY 1. KD-55XD9305 1-34. SHEET, THERMAL(BM) AND PLATE, MAIN S (GNT L) SHEET, THERMAL(BM) PLATE, MAIN S (GNT L) 2 screws (SCREW, +LH M3X3 (CRN)) P/N: 4-549-168-01 Note: Screw for securing “PLATE, MAIN S (GNT)” is Low Head Type. And it has a “Cross Recess #1”.
  • Page 105 DISASSEMBLY 1. KD-55XD9305 1-35. CUSHION(GNT LD) AND J CUSHION(GNT LD) 3 screws (SCREW, +PSW M3X6) P/N: 4-472-518-11 KD-55/65XD9305...
  • Page 106 DISASSEMBLY 1. KD-55XD9305 1-36. DPS AND SHEET, THERMAL (BAF) 4 screws (SCREW, +PSW M3X6) P/N: 4-472-518-11 SHEET, THERMAL (BAF) KD-55/65XD9305...
  • Page 107 DISASSEMBLY 1. KD-55XD9305 1-37. CUSHION, AL SP (GNT) CUSHION, AL SP (GNT) CUSHION, AL SP (GNT) KD-55/65XD9305...
  • Page 108 DISASSEMBLY 1. KD-55XD9305 1-38. BRACKET, HOOK (L) (GNT) AND BRACKET, HOOK (R) (GNT) Screw (SCREW, +PSW M3X6) P/N: 4-472-518-11 Screw (SCREW, +PSW M3X6) P/N: 4-472-518-11 BRACKET, HOOK (L) (GNT) BRACKET, HOOK (R) (GNT) KD-55/65XD9305...
  • Page 109 DISASSEMBLY 1. KD-55XD9305 1-39. AL TAPE, BT ANT (GNT L) AND AL TAPE, PWB LS (GNT) AL TAPE, BT ANT (GNT L) AL TAPE, PWB LS (GNT) KD-55/65XD9305...

  • Page 110: Lcd Panel

    DISASSEMBLY 1. KD-55XD9305 1-40. SHEET INSULATION VESA (GNT L) AND LCD PANEL LCD PANEL SHEET INSULATION VESA (GNT L) KD-55/65XD9305...
  • Page 111 DISASSEMBLY 2. KD-65XD9305 2-1. STAND CENTER COVER 4 Screws (SCREW, +PSW M5 X12) P/N: 2-580-607-01 STAND COVER STAND NECK STAND BASE 4 Screws (SCREW, +PSW M5 X12) P/N: 2-580-607-01 KD-55/65XD9305...
  • Page 112 DISASSEMBLY 2. KD-65XD9305 2-2. LABEL, REAR TERMINAL (GNT) AND LABEL, DC IN (GNT) LABEL, REAR TERMINAL (GNT) LABEL, DC IN (GNT) KD-55/65XD9305...
  • Page 113 DISASSEMBLY 2. KD-65XD9305 2-3. CLAMP, CABLE (GNT L) CLAMP, CABLE (GNT L) CLAMP, CABLE ( GNT L) KD-55/65XD9305...
  • Page 114 DISASSEMBLY 2. KD-65XD9305 2-4. COVER, SIDE (GNT) AND SCREW CAP (GNT) COVER, SIDE (GNT) SCREW CAP (GNT) KD-55/65XD9305...
  • Page 115 DISASSEMBLY 2. KD-65XD9305 Note: 2-5. REAR COVER (2L GNT) A Before taking off Rear Cover, you have to slide BRACKET-SLIDE of both sides to the top side. Please refer to Appendix-1. 4 screws (SCREW, ORNAMENTAL M6X12) P/N: 4-268-126-02 2 screws (JOINT, SCREW) P/N: 4-400-043-11 2 screws (SCREW +BVTP 3X10 TYPE2 IT-3) P/N: 7-685-647-79 15 screws (SCREW , +PWH M3X6) P/N: 4-452-935-01 REAR COVER (2L GNT) A...
  • Page 116 DISASSEMBLY 2. KD-65XD9305 2-5. REAR COVER (2L GNT) A NOTES: When re-assembling REAR COVER (2L GNT) A KD-55/65XD9305...
  • Page 117 DISASSEMBLY 2. KD-65XD9305 2-6. CATCHER CATCHER KD-55/65XD9305...
  • Page 118 DISASSEMBLY 2. KD-65XD9305 2-7. COVER, UNDER (GNT) A AND BRACKET, DC JACK (GNT) COVER, UNDER (GNT) A BRACKET, DC JACK( GNT) KD-55/65XD9305...
  • Page 119 DISASSEMBLY 2. KD-65XD9305 2-8. TAPE TAPE TAPE TAPE KD-55/65XD9305...
  • Page 120 DISASSEMBLY 2. KD-65XD9305 2-9. SP-BOX ASSY (W12-L CH-ND) SP-BOX ASSY (W12-L CH-ND) KD-55/65XD9305...
  • Page 121 DISASSEMBLY 2. KD-65XD9305 2-10. TAPE TAPE TAPE TAPE TAPE KD-55/65XD9305...
  • Page 122 DISASSEMBLY 2. KD-65XD9305 2-11. TAPE TAPE TAPE TAPE TAPE KD-55/65XD9305...
  • Page 123 DISASSEMBLY 2. KD-65XD9305 2-12. TAPE AND WIRE DRESSING TAPE TAPE KD-55/65XD9305...
  • Page 124 DISASSEMBLY 2. KD-65XD9305 2-13. TAPE TAPE TAPE TAPE TAPE KD-55/65XD9305...
  • Page 125 DISASSEMBLY 2. KD-65XD9305 2-14. SP-BOX ASSY(W12-R CH-ND) SP-BOX ASSY (W12-R CH-ND) KD-55/65XD9305...
  • Page 126 DISASSEMBLY 2. KD-65XD9305 2-15. TAPE TAPE TAPE TAPE KD-55/65XD9305...
  • Page 127 DISASSEMBLY 2. KD-65XD9305 2-16. BT ANTENNA BT ANTENNA Screw (SCREW, +PSW M3X6) P/N: 4-472-518-11 KD-55/65XD9305...
  • Page 128 DISASSEMBLY 2. KD-65XD9305 2-17. TAPE AND WIRE DRESSING TAPE KD-55/65XD9305...
  • Page 129 DISASSEMBLY 2. KD-65XD9305 NOTES: 2-18. SMART CORE (S) For This For This Model Model HARNESS ASSY (MAIN) SMART CORE (S) KD-55/65XD9305...
  • Page 130 DISASSEMBLY 2. KD-65XD9305 2-19. TSI AND BRACKET, TS Screw (SCREW, +PSW M3X6) P/N: 4-472-518-11 BRACKET, TS Screw (SCREW, +PSW M3X6) P/N: 4-472-518-11 KD-55/65XD9305...
  • Page 131 DISASSEMBLY 2. KD-65XD9305 2-20. SWITCH UNIT NOTE: When passing harness into the slit SWITCH UNIT HARNESS ASSY (MAIN) KD-55/65XD9305...
  • Page 132 DISASSEMBLY 2. KD-65XD9305 2-21. HARNESS ASSY (MAIN) AND HOLDER SIDE SW (GNT L M1) Screw (SCREW, +LH M3X2.1 STEP (GNT)) P/N: 4-586-665-01 HARNESS ASSY (MAIN) P/N: 1-910-111-12 HOLDER SIDE SW (GNT L M1) KD-55/65XD9305...
  • Page 133 DISASSEMBLY 2. KD-65XD9305 2-22. TAPE AND CONNECTOR ASSY 10P TAPE CONNECTOR ASSY 10P P/N: 1-910-111-21 KD-55/65XD9305...
  • Page 134 DISASSEMBLY 2. KD-65XD9305 2-23. TAPE AND CONNECTOR ASSY 30P TAPE TAPE CONNECTOR ASSY 30P P/N: 1-910-111-08 KD-55/65XD9305...
  • Page 135 DISASSEMBLY 2. KD-65XD9305 2-24. TAPE AND FLEXIBLE FLAT CABLE 30P TAPE TAPE TAPE FLEXIBLE FLAT CABLE 30P P/N: 1-910-111-10 KD-55/65XD9305...
  • Page 136 DISASSEMBLY 2. KD-65XD9305 2-25. FLEXIBLE FLAT CABLE 51P AND FLEXIBLE FLAT CABLE 41P FLEXIBLE FLAT CABLE 51P P/N: 1-849-321-11 FLEXIBLE FLAT CABLE 41P P/N: 1-849-322-11 KD-55/65XD9305...
  • Page 137 DISASSEMBLY 2. KD-65XD9305 2-26. TAPE TAPE TAPE TAPE TAPE KD-55/65XD9305...
  • Page 138 DISASSEMBLY 2. KD-65XD9305 2-27. FLEXIBLE FLAT CABLE 30P(BD) AND FLEXIBLE FLAT CABLE 51P FLEXIBLE FLAT CABLE 30P(BD) P/N: 1-910-111-11 FLEXIBLE FLAT CABLE 51P P/N: 1-849-320-11 KD-55/65XD9305...
  • Page 139 DISASSEMBLY 2. KD-65XD9305 2-28. TAPE AND CONNECTOR ASSY 20P TAPE TAPE CONNECTOR ASSY 20P P/N: 1-910-111-14 KD-55/65XD9305...
  • Page 140 DISASSEMBLY 2. KD-65XD9305 2-29. BRACKET, SLIDE (L) (2L GNT) 3 screws (SCREW, +LH M3X2.1 STEP (GNT)) P/N: 4-586-665-01 BRACKET, SLIDE (L) (2L GNT) KD-55/65XD9305...
  • Page 141 DISASSEMBLY 2. KD-65XD9305 2-30. BRACKET, SLIDE (R) (2L GNT) 3 screws (SCREW, +LH M3X2.1 STEP (GNT)) P/N: 4-586-665-01 BRACKET, SLIDE (R) (2L GNT) KD-55/65XD9305...
  • Page 142 DISASSEMBLY 2. KD-65XD9305 2-31. TOP COVER (2L GNT) 7 screws (SCREW, +PSW M3X6) P/N: 4-472-518-11 TOP COVER (2L GNT) KD-55/65XD9305...
  • Page 143 DISASSEMBLY 2. KD-65XD9305 2-32. SLIDE, CLAMP AND BRACKET, INSIDE (GNT) SLIDE, CLAMP BRACKET, INSIDE (GNT) KD-55/65XD9305...
  • Page 144 DISASSEMBLY 2. KD-65XD9305 2-33. BRACKET, SIDE (GNT) BRACKET, SIDE (GNT) KD-55/65XD9305...
  • Page 145 DISASSEMBLY 2. KD-65XD9305 2-34. BRACKET, TOP (GNT) BRACKET, TOP (GNT) KD-55/65XD9305...
  • Page 146 DISASSEMBLY 2. KD-65XD9305 2-35. BM1 8 screws (SCREW, +PSW M3X6) P/N: 4-472-518-11 KD-55/65XD9305...
  • Page 147 DISASSEMBLY 2. KD-65XD9305 2-36. LABEL, INSIDE TERMINAL (GNT) AND LABEL, SIDE TERMINAL (GNT) When you do panel replacement, When you do panel replacement, please also replace this part at the same time to a new one. please also replace this part at the same time to a new one. LABEL, SIDE TERMINAL (GNT) LABEL, INSIDE TERMINAL (GNT) Caution: Don’t damage to LABEL.
  • Page 148 DISASSEMBLY 2. KD-65XD9305 2-37. SHEET, THERMAL(BM) SHEET, THERMAL(BM) KD-55/65XD9305...
  • Page 149 DISASSEMBLY 2. KD-65XD9305 2-38. PLATE, MAIN S (GNT L) 2 screws (SCREW, +LH M3X3 (CRN)) P/N: 4-549-168-01 Note: Screw for securing “PLATE, MAIN S (GNT)” is Low Head Type. And it has a “Cross Recess #1”. So, please prepare #1 bit Screw Driver for this operation. PLATE, MAIN S (GNT L) KD-55/65XD9305...
  • Page 150 DISASSEMBLY 2. KD-65XD9305 2-39. CUSHION (GNT LD) AND J CUSHION (GNT LD) 3 screws (SCREW, +PSW M3X6) P/N: 4-472-518-11 KD-55/65XD9305...
  • Page 151 DISASSEMBLY 2. KD-65XD9305 2-40. DPS AND SHEET, THERMAL (BAF) 4 screws (SCREW, +PSW M3X6) P/N: 4-472-518-11 SHEET, THERMAL (BAF) KD-55/65XD9305...
  • Page 152 DISASSEMBLY 2. KD-65XD9305 2-41. GASKET(SP GNT) AND CUSHION, AL SP (GNT) GASKET(SP GNT) CUSHION, AL SP (GNT) CUSHION, AL SP (GNT) KD-55/65XD9305...
  • Page 153 DISASSEMBLY 2. KD-65XD9305 2-42. BRACKET, HOOK (L) (GNT) AND BRACKET, HOOK (R) (GNT) Screw (SCREW, +PSW M3X6) P/N: 4-472-518-11 Screw (SCREW, +PSW M3X6) P/N: 4-472-518-11 BRACKET, HOOK (L) (GNT) BRACKET, HOOK (R) (GNT) KD-55/65XD9305...
  • Page 154 DISASSEMBLY 2. KD-65XD9305 2-43. AL TAPE, PWB LS (GNT) AND SHEET INSULATION VESA (GNT 2L) AND LCD PANEL AL TAPE, PWB LS (GNT) LCD PANEL SHEET INSULATION VESA (GNT 2L) KD-55/65XD9305...
  • Page 155 DISASSEMBLY 3. SMART CORE (S) 3-1. BRACKET, WIFI ASSY BRACKET, WIFI ASSY KD-55/65XD9305...
  • Page 156 DISASSEMBLY 3. SMART CORE (S) 3-2. WLAN / BT MODULE(11AC) AND BRACKET, WIFI NOTE: BRACKET, WIFI NOTES: For This Model WLAN / BT MODULE(11AC) KD-55/65XD9305...
  • Page 157 DISASSEMBLY 3. SMART CORE (S) 3-3. SHEET, IR NOISE AND COVER, TOP When you do TOP COVER replacement, please also replace this part at the same time to a new one. SHEET, IR NOISE P/N: 4-590-730-01 60 x 13 (t0.2) Datum: edge of cover top Datum: edge of cover top hole COVER, TOP...
  • Page 158 DISASSEMBLY 3. SMART CORE (S) 3-4. HSC4-S NOTES: HSC4-S KD-55/65XD9305...
  • Page 159 DISASSEMBLY 3. SMART CORE (S) 3-5. PANEL, ORNAMENT PANEL, ORNAMENT Sequence Information KD-55/65XD9305...
  • Page 160 DISASSEMBLY 3. SMART CORE (S) 3-6. GUIDE, LIGHT AND CASE, BTM (S) GUIDE, LIGHT CASE, BTM (S) KD-55/65XD9305...

  • Page 161: Exploded Views

    • The construction parts of an assembled part are indicated with a collation number in the remark column. • Items marked " * " are not stocked since they are seldom required for routine service. Some delay should be anticipated when ordering these items. 1. KD-55XD9305 REAR COVER REF.
  • Page 162 EXPLODED VIEWS 1. KD-55XD9305 SP-BOX ASSY REF. No. PART No. DESCRIPTION MARK 4-588-214-02 BRACKET, SLIDE (L) (L GNT) 1-493-015-11 SWITCH UNIT (VM-WW) 4-582-343-01 HOLDER SIDE SW(GNT L M1) A-2093-478-A TSI MOUNT 4-580-891-01 BRACKET, TS 1-859-140-11 SP-BOX ASSY(W12-L CH-ND) 1-859-140-21 SP-BOX ASSY(W12-R CH-ND)
  • Page 163 EXPLODED VIEWS 1. KD-55XD9305 LCD PANEL REF. No. PART No. DESCRIPTION MARK 4-587-362-01 AL TAPE, PWB LS (GNT) 4-581-500-11 LABEL, SIDE TERMINAL (GNT) 4-581-153-11 BRACKET, TOP(GNT) 4-579-715-21 BRACKET, SIDE (GNT) A-2094-415-A COMPL SVC BM1_EU_CI 4-579-716-21 BRACKET, INSIDE (GNT) 4-581-502-21 LABEL, INSIDE TERMINAL (GNT)
  • Page 164 EXPLODED VIEWS 1. KD-55XD9305 CONNECTORS REF.NO. PART No. DESCRIPTION MARK 1-849-319-11 FLEXIBLE FLAT CABLE 41P CN3600(DPS)-TCON (1) 1-849-325-11 FLEXIBLE FLAT CABLE 51P CN3601(DPS)-TCON (1) 1-849-326-11 FLEXIBLE FLAT CABLE 51P CN8701(BM1)-CN8700(DPS) (1) 1-910-111-05 FLEXIBLE FLAT CABLE 30P CN8301(DPS)-CN(LD) (1) 1-910-111-06 FLEXIBLE FLAT CABLE 30P(BD)
  • Page 165 EXPLODED VIEWS 1. KD-55XD9305 SCREWS REF. DESCRIPTION PART No. SCREW, ORNAMENTAL M6X12 4-268-126-02 SCREW , +PWH M3X6 4-452-935-01 SCREW +BVTP 3X10 TYPE2 IT-3 7-685-647-79 SCREW, +PSW M3X6 4-472-518-11 SCREW, +LH M3X2.1 STEP (GNT) 4-586-665-01 JOINT, SCREW 4-400-043-11 KD-55/65XD9305...
  • Page 166 EXPLODED VIEWS 2. KD-65XD9305 REAR COVER REF. No. PART No. DESCRIPTION MARK 4-580-271-01 COVER, SIDE (GNT) 4-584-550-02 LABEL, REAR TERMINAL (GNT) 4-580-270-01 SCREW CAP (GNT) 4-582-003-01 CLAMP, CABLE(GNT L) 4-586-681-02 REAR COVER (2L GNT) A 3-299-766-02 CATCHER KD-55/65XD9305...
  • Page 167 EXPLODED VIEWS 2. KD-65XD9305 SP-BOX ASSY REF. No. PART No. DESCRIPTION MARK 4-580-268-02 BRACKET, SLIDE (L) (2L GNT) 1-493-015-11 SWITCH UNIT (VM-WW) 4-582-343-01 HOLDER SIDE SW(GNT L M1) A-2093-478-A TSI MOUNT 4-580-891-01 BRACKET, TS 1-859-140-11 SP-BOX ASSY(W12-L CH-ND) 1-859-140-21 SP-BOX ASSY(W12-R CH-ND) 4-586-388-01 COVER,UNDER (GNT) A 1-754-975-11...
  • Page 168 EXPLODED VIEWS 2. KD-65XD9305 LCD PANEL REF. No. PART No. DESCRIPTION MARK 4-587-362-01 AL TAPE, PWB LS (GNT) 4-581-500-11 LABEL, SIDE TERMINAL (GNT) 4-581-153-11 BRACKET, TOP(GNT) 4-579-715-21 BRACKET, SIDE (GNT) A-2094-415-A COMPL SVC BM1_EU_CI 4-579-716-21 BRACKET, INSIDE (GNT) 4-581-502-21 LABEL, INSIDE TERMINAL (GNT) 4-580-266-01 BRACKET, HOOK (L) (GNT) 2-650-770-21...
  • Page 169 EXPLODED VIEWS 2. KD-65XD9305 CONNECTORS REF.NO. PART No. DESCRIPTION MARK 1-849-320-11 FLEXIBLE FLAT CABLE 51P CN8701(BM1)-CN8700(DPS) (1) 1-849-321-11 FLEXIBLE FLAT CABLE 51P CN3601(DPS)-TCON (1) 1-849-322-11 FLEXIBLE FLAT CABLE 41P CN3600(DPS)-TCON (1) 1-910-111-08 CONNECTOR ASSY 30P CN6001(LD)-CN401(DPS) (1) 1-910-111-10 FLEXIBLE FLAT CABLE 30P CN8301(DPS)-CN(LD) (1) 1-910-111-11 FLEXIBLE FLAT CABLE 30P(BD)
  • Page 170 EXPLODED VIEWS 2. KD-65XD9305 SCREWS REF. DESCRIPTION PART No. SCREW, ORNAMENTAL M6X12 4-268-126-02 SCREW , +PWH M3X6 4-452-935-01 SCREW +BVTP 3X10 TYPE2 IT-3 7-685-647-79 SCREW, +PSW M3X6 4-472-518-11 SCREW, +LH M3X2.1 STEP (GNT) 4-586-665-01 JOINT, SCREW 4-400-043-11 SCREW, +LH M3X3 (CRN) 4-549-168-01 KD-55/65XD9305...
  • Page 171 EXPLODED VIEWS 3. SMART CORE (S) REF. No. PART No. DESCRIPTION MARK 4-580-149-01 PANEL, ORNAMENT A-2092-887-B HSC4-S MOUNT 4-580-146-01 CASE, BTM (S) 4-580-150-01 GUIDE, LIGHT 4-580-151-01 COVER, TOP 4-547-397-02 BRACKET, WIFI 1-458-853-11 WLAN/BT MODULE(11AC) KD-55/65XD9305...
  • Page 172 EXPLODED VIEWS 4. OTHER PART MISCELLANEOUS ACCESSORIES PART No. DESCRIPTION MARK PART No. DESCRIPTION MARK 4-457-451-01 SHEET, THERMAL (BAF) 4-460-760-01 CASE, BATTERY (SERVICE) 4-549-186-01 SHEET, THERMAL(BM) 4-460-761-01 PAD, NOSE (SERVICE) 1-493-129-11 REMOTE COMMANDER (RMF-TX200E) 4-589-644-01 CUSHION(GNT LD) 4-580-277-02 ATTACHMENT, WALL MOUNT A (GNT) 4-590-730-01 SHEET, IR NOISE 4-582-002-01...
  • Page 173 English 2016BL08-Data Made in Japan © 2016. 2 9-888-588-01 Sony Visual Products Inc. KD-55/65XD9305...
  • Page 174 APPENDIX-1 How to take off a rear cover After taking off screws for disassembly, Pull Rear Cover backside Pull Rear Cover to downside pull SLIDE BRACKET to upside Hook Hook Need to unfix the Hook If it is difficult, pull RC to downside with both bottom corner shaking RC.
  • Page 175 APPENDIX-2 How to disassemble HEAT SINK (BM1 board) <NOTE> HEAT SINK are already attached to the B board for service. If you need to disassemble HEAT SINK from B board for repair, Please cut HOLDER,HS WS(MUF) with tool (nippers) from B side of B board. However, please it carefully because some damage may be given nipper to the neighborhood parts or the B board itself.
  • Page 176 APPENDIX-2 How to disassemble HEAT SINK (DPS board) <NOTE> HEAT SINK are already attached to the DPS board for service. If you need to disassemble HEAT SINK from DSP board for repair, Please cut HOLDER,HS WS(MUF) with tool (nippers) from B side of DPS board. However, please it carefully because some damage may be given nipper to the neighborhood parts or the DPS board itself.

This manual is also suitable for:

Kd-65xd9305

Table of Contents

Save PDF