HP marten-mouse-free Instructions For Use Manual page 12

lorsque les dommages résultent d'erreurs de commande, d'un traitement
négligent ou abusif.
Votre
Équipe HP-AUTOZUBEHHÖR
Mise à jour: 03/16
Instructions for Use
marten-mouse-free
Article No. 10098
Dear Client,
Congratulations for choosing one of our quality products. Please follow
these instructions carefully and keep them with you.
Functional method
The marten-mouse-free device produces an acoustic signal with a
frequency of 12 - 24 kHz at intervals of around 22 seconds for each on
and off period. In addition the device has 4 x 2 high-voltage plates
(plus/minus) on two cables which are charged up by a capacitor in the
device to around 400 +/- 50 Volts. The high-voltage plates are mounted in
the engine compartment such that a marten entering the compartment
and touching one of the plates will get a painful, but not lethal, electric
shock. In the time taken for the capacitor to charge up again, the animal
has the chance to flee the engine compartment without being killed due
to permanent muscle contraction caused by prolonged contact with a
high voltage. As a third marten-mouse deterrent function, an LED light
flashes 3 times when the high voltage is triggered, which scares and
repels the intruders.
Assembly
The marten-mouse-free device is fastened by means of self-tapping
screws or binders in the engine compartment on the carriage. The
connecting cable to the car battery must be passed in that manner that it
doesn't get in contact with movable or hot parts (e.g. ventilating wheel,
exhaust manifold).