Table of Contents
Advertisement
6-5 CONFIRMATION OF INSTALLATION
Use Test Mode to confirm that assembly is proper, connecting boards, and input/output devices are normal. See
Section 9 "Test and Service Data" for more information on each individual test.
Perform the following tests in Test Mode:
6
1
Unlock and open the Coin Door to access the SW Unit. Use the Test Button to enter the Test and Service
Menu
2
Enter the section "Input Test". Ensure all Controller components and Buttons are functioning correctly
3
Enter the section "Output Test". Ensure all LEDs and speakers are functioning correctly
26
SW Unit
Advertisement
Table of Contents
