Page 2
R E P E AT A L A R M / B R I G H T N E S S C O N T R O L FOCUS DISPLAY DATE/SET TIME AUTO SCAN...
Page 3
& Model No. : AJ3650/12 3V CR2032 (Backup Battery) Ext AC-DC Adaptor 7.5V 1A Clock memory back up CR2032 battery Designed and Developed by Philips, Holland PRESET TUNING VOLUME DC IN 7.5V...
Page 5
SUPPLIED ACCESSORIES – 1 switching power adapter (Model: DSA-9W-69F EU 075100, Input: 100-240V~50/60 Hz, 0.5 A, Output: 7.5 V, 1.0 A) – 1 outdoor temperature sensor FRONT and TOP PANEL (See 1) 1 PROJECTION/IMAGE FLIP – toggles projection on and off –...
Page 6
7 AUTO SCAN – in tuner mode, press and hold it to scan radio stations automatically and stores them as preset stations – clock and projection mode, press and hold it to search the outdoor tempera- ture sensor 8 DATE/SET TIME –...
% DC IN – socket for AC/DC 7.5 V adapter ^ Pigtail – temperature sensor and antenna to enhance FM reception & RESET – press if the set does not react to operation of any button * Battery compartment – holds the clock backup battery ( IMAGE ROTATE –...
Helpful hints: To avoid damage to the set, use only the adapter supplied! SETTING THE CLOCK The clock uses 24-hour time format. Important! Pull out the plastic protective sheet to activate the clock backup battery (CR2032). This battery is included and installed in the set. Manual setting 1.
TUNING TO RADIO STATONS Automatic tuning • Press and hold TUNING +/- to automatically tune to the next or previous station of sufficient reception. Manual tuning • Press TUNING +/- briefly or repeatedly until you reach the desired frequency. To improve reception: Extend and position the pigtail fully to obtain optimum reception.
– When clock time is displayed, to view the current radio frequency, • Press RADIO twice. • For preset stations, press the respective PRESET button once or repeatedly. USING THE ALARM Two different alarm times can be set. This can be useful when you and your part- ner need to be woken up at different time.
Page 11
DEACTIVATING THE ALARM COMPLETELY • Press ALARM 1 or ALARM 2 button once or more until the SLEEP About Sleep This set has a built-in sleep timer, which enables the radio to be automatically switched off or relaxation music volume to be turned down gradually after a set period of time.
Page 12
USING THE SENSOR TO DETECT OUTDOOR TEMPERATURE (See 3) The main unit comes with an outdoor sensor. Using the sensor, the unit is capa- ble to measure and display outdoor temperature through receiving data trasmit- ted from the sensor placed at other location. 1.
INDOOR TEMPERATURE The set can also automatically measure and display current temperature in Centigrade. • Press DISPLAY to toggle the display between indoor temperature and out- door temperature. • Press and hold DISPLAY to display indoor temperature, outdoor temperature, and day of week cyclically. ™...
TROUBLESHOOTING If a fault occurs, first check the points listed below before taking the set for repair. If you are unable to remedy a problem by following these hints, consult your dealer or service centre. WARNING: Under no circumstances should you try to repair the set yourself, as this will invalidate the guarantee.
Page 15
Blurry projection – Angle between the projection surface too large • Adjust the angle. – Focus is not proper • Turn FOCUS wheel. The main unit cannot read or update outdoor temperature from the sensor – No signal or weak signal. •...
Page 16
Disposal of your old product Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC. Please inform yourself about the local separate collection system for electrical and electronic products.
Page 17
Clock radio Meet Philips at the Internet http://www.philips.com English Printed in China ALJW-0801...