Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Honeywell 8675i
Summary of Contents for Honeywell 8675i
- Page 1 8675i Rugged Compact Wearable Scanner Quick Start Guide 8675i-EN-QS-01 Rev A 2/22...
- Page 2 Avant d’essayer d’utiliser, de charger ou de remplacer la batterie de l’appareil, lisez attentivement toutes les étiquettes, marquages et documentation du produit fournis dans la boîte ou en ligne à sps.honeywell.com. Pour en savoir plus sur l’Entretien de Batteries pour Appareils Portables, consultez-le honeywell.com/...
-
Page 3: Device Features
Device Features Battery Battery Latches Scan/Bluetooth Status LED NFC Touch Point Scanner Scan Trigger Scan/Battery Status LED Strap Loop Release Triggered Latch Ring Scan Status Strap Buckle LEDs... -
Page 4: Charging The Battery
Charging the Battery The 8675i rugged compact wearable scanner ships with a partially charged battery. The battery must be fully charged before first use. The following charging stations are available for the device and must be purchased separately: • MB8-BAT-SCN10 •... -
Page 5: Install The Battery
Install the Battery The device ships with a 3.85V, 570 mAh battery manufactured by Honeywell International Inc. Use only Honeywell battery model BAT-SCN10. -
Page 6: Replace The Battery
When the battery is low, the 8675i beeps, vibrates, and the Battery LED flashes. To replace the battery, squeeze the battery latches and lift up on the battery. - Page 7 Right or Left Handed Operation To release the finger trigger, turn over the device. Press the Release Latch on the bottom. Rotate the trigger and snap it into place to change the operation to the correct hand.
-
Page 8: Power Up The Device
Attach the Device to Your Finger Lift up on the Strap Buckle to unlock the strap. Insert your finger through the Trigger Ring. Pull the excess strap down. Press down on the Strap Buckle. Pull the excess strap through the Strap Loop. - Page 9 Warning: Do not stare directly into the laser beam. How to Scan a Barcode The 8675i scanner has a view finder that projects a bright laser aiming pattern. This aiming pattern should be centered over the barcode, but it can be positioned in any direction for a good read.
- Page 10 (Refer to your host device’s User’s Guide for pairing instructions.) When your host device has located the 8675i, you can select it from the list displayed. Note: Refer to the 8675i User’s Guide if your host device displays a PIN.
- Page 11 Pair with a PC or Laptop Bluetooth: HID Keyboard Mode In this mode, the 8675i pairs with a Bluetooth device using a HID keyboard. Scan the Bluetooth HID Keyboard Connect barcode below. Bluetooth HID Keyboard Connect Set your host device so it searches for other Bluetooth devices.
- Page 12 Bluetooth Disconnect Pair with an Android™ Mobile Device Tap and Pair You can pair your Android™ phone with the 8675i by touching the devices together. Make sure the NFC setting is On in your phone. Touch the Android phone to the device.
- Page 13 Bluetooth devices. (Refer to your mobile device’s User’s Guide for pairing instructions.) Scan the Bluetooth HID Keyboard Connect barcode below. Bluetooth HID Keyboard Connect On the mobile device, the 8675i device is shown as a keyboard. Click on it to pair.
- Page 14 Scan the Bluetooth HID Keyboard Disconnect barcode below. Bluetooth HID Keyboard Disconnect Use the 8675i to scan the EZPairing barcode that is either supplied with the device, attached to the device, or displayed on the screen. The EZPairing barcode begins with...
- Page 15 This is often a carriage return and line feed, which can be programmed by scanning the following barcode: CR/LF Suffix Refer to the 8675i User Guide if you require other termination characters. In the VoiceConsole, set the Vocollect device to: •...
- Page 16 {FNC3} LnkB, followed by 12 digits, like the sample below. The Bluetooth LED flashes continuously when the 8675i pairs with a host. Once the 8675i battery is charged and you have paired it to a host device, you may begin scanning barcodes.
-
Page 17: User Documentation
Patents For patent information, see www.hsmpats.com. Disclaimer Honeywell International Inc. (“HII”) reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult HII to determine whether any such changes have been made. - Page 18 All rights are reserved. No part of this document may be photocopied, reproduced, or translated into another language without the prior written consent of HII. Copyright 2021-2022 Honeywell International Inc. All rights reserved. Microsoft® Windows®, Windows NT®, Windows 2000, Windows ME, Windows XP, and the Windows logo are trademarks or registered trademarks of Microsoft Corporation.