Related Manuals for Hunter Douglas MOTOLUX TURNILS 802343018
Summary of Contents for Hunter Douglas MOTOLUX TURNILS 802343018
- Page 1 Programming Instructions 28mm DC USB Rechargeable Battery 1.8nm Tubular Motor 802343018 (MT28-1.8/25-ES-E)
- Page 2 Programming Instructions 28mm DC USB RECHARGEABLE BATTERY 1.8NM TUBULAR MOTOR – 802343018 (MT28-1.8/25-ES-E) Fully charge the motors first. Please Note Only use a USB-A to USB-C Cable to charge the motor. You cannot use USB-C – USB-C Cable, the motor will not charge. Before plugging in the charge cable, the motor will have to be woken up, a quick push of the Pairing Button on the head of the motor is required.
- Page 3 Programming Instructions 28mm DC USB RECHARGEABLE BATTERY 1.8NM TUBULAR MOTOR – 802343018 (MT28-1.8/25-ES-E) Resetting a Motor Back to Factory On the remote/ channel assigned to the motor, press and hold the Stop Button, the motor will jog. Press and hold the Programming Button on the side of the remote for a total of 7 seconds. The motor will jiggle once and then will give a Double Jiggle a couple of seconds later, indicating the motor has been returned to factory settings.
- Page 4 Option 2: If it is only one motor on a channel, follow the ‘Delete Channel’ instructions and set up and start again. ©Copyright 2023 Hunter Douglas Limited ABN 98 009 675 709 ®Motolux is a registered trade mark of Hunter Douglas Limited 12/2023...
Need help?
Do you have a question about the MOTOLUX TURNILS 802343018 and is the answer not in the manual?
Questions and answers