Sony XAV-AX8500 Operating Instructions Manual
Hide thumbs
Also See for XAV-AX8500:
- Operating instructions manual (81 pages) ,
- Help manual (129 pages)
Table of Contents
Related Manuals for Sony XAV-AX8500
Summary of Contents for Sony XAV-AX8500
- Page 1 5-050-132-31(2) AV RECEIVER Operating Instructions To cancel the demonstration (Demo Mode) display, see page 6. To switch the FM/AM tuning step, see page 5. XAV-AX8500(IN) https://rd1.sony.net/help/ev/xav-ax8500/h_zz/ XAV-AX8500...
- Page 2 Services offered by third parties may be changed, suspended, or terminated without prior notice. The nameplate indicating operating voltage, etc., is Sony does not bear any responsibility in these sorts located on the bottom of the chassis. of situations. The validity of the CE marking is restricted to only...
- Page 3 Important notice Caution IN NO EVENT SHALL SONY BE LIABLE FOR ANY INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR OTHER DAMAGES INCLUDING, WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF REVENUE, LOSS OF DATA, LOSS OF USE OF THE PRODUCT OR ANY ASSOCIATED EQUIPMENT, DOWNTIME, AND PURCHASER’S TIME RELATED TO...
-
Page 4: Main Unit
Screen Displays Guide to Parts and Controls Playback screen: Main Unit HOME1 screen: The VOL (volume) + button has a tactile dot. HOME Displays the HOME screen. STANDBY Press and hold to turn off the unit. Press and hold for more than 10 seconds to reset the unit. -
Page 5: Switching The Fm/Am Tuning Step
Status indication (left side) (back) Returns to the previous display. Basic Operations (list) Opens the list. The available lists differ depending on the Switching the FM/AM Tuning source. Step Status indication (right side) Set the FM/AM tuning step of your country or region. -
Page 6: Pairing With A Bluetooth Device
To pair from the BLUETOOTH device When setting the BLUETOOTH setting of the BLUETOOTH device to [ON], select “XAV-AX8500” on the setting screen of your BLUETOOTH device and then proceed to the pairing steps. Follow the instructions on the screen of the unit. -
Page 7: Maintenance
• Check the Apple CarPlay website for supported iOS versions. Update to the latest iOS version before use. If you have any questions or problems concerning your unit that are not covered in this Operating Instructions, consult your nearest Sony dealer. -
Page 8: Specifications
*2 BLUETOOTH standard profiles indicate the purpose of Specifications BLUETOOTH communication between devices. Wi-Fi section Monitor section Compatible standards: Display type: Wide LCD color monitor IEEE802.11 a/n/ac Dimensions: 25.7 cm/ 10.1 in Radio frequency: System: TFT active matrix 5 GHz band (5.725 GHz – 5.850 GHz) Number of pixels: Output power: 2 764 800 pixels (1280 ×... - Page 9 The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Sony Group Corporation and its subsidiaries is under license. Other trademarks and trade names are those of their respective owners.
- Page 10 Note on the power supply lead (yellow) When connecting this unit in combination with other stereo components, the amperage rating of the car circuit to which Connection/Installation the unit is connected must be higher than the sum of each component’s fuse amperage rating. Cautions Note on installing in cars with a start-stop system The unit may restart when starting the engine from start-...
- Page 11 • For your safety, adjust the mounting location of Ensuring the mounting location of the the unit so that it does not interfere with driving unit operations such as button (switch) or shift lever operations. Hidden area even when the display is Before installing the unit, consult the installer for slid up or down details on the installation of the unit and the...
-
Page 12: Parts List For Installation
Parts List for Installation Power supply leads (1) Connection cables (Audio/Camera) (1) Mounting screw Microphone (1) (5 × max. 9 mm × max. in)) (4) Flat-mount base (1) Double-sided tape (1) USB Type-C extension cable ... - Page 13 Connection • To prevent short circuits, insulate leads with a cover or tape. • Note that the unit may be damaged if it is connected incorrectly or by short circuits at the leads. EXT IN 1 EXT IN 2 Camera* Camera* Rear view camera*...
- Page 14 To the parking brake switch lead *1 Not supplied *2 Speaker impedance: 4 Ω to 8 Ω × 4 The mounting position of the parking brake *3 RCA pin cord (not supplied) switch lead depends on your car. *4 Power amplifier (not supplied) Be sure to connect the parking brake lead (light *5 Subwoofer (not supplied) green) of the power supply leads ...
- Page 15 Decide the installation location on the Installing the microphone dashboard, then clean the attachment surface. To capture your voice during handsfree calling, you Choose a flat surface where: need to install the microphone . the GPS antenna (aerial) can be positioned horizontally.
- Page 16 HDMI device. Making an improper connection may damage the unit. Press HOME, then touch [USB] or [HDMI]. URL: https://www.sony-asia.com/support Note • Consulting the dealer or an experienced When playing back video from an HDMI device, playback technician for help is recommended.
-
Page 17: Installation
Angle (swivel) (-15° to +15°, continuously) You may not be able to install this unit in some makes of Japanese cars. In such a case, consult your Sony dealer. Example to dashboard/center console Width (within 25 mm (1 in), in 5 steps) - Page 18 Slide the connector bracket to decide the Adjust the mounting position of the screw appropriate depth position. located where the line () on the swivel cover is closest to the ground and oriented Adjustable depth: within 20 mm ( in) (), in horizontally.
- Page 19 Note At the desired position, tighten the 4 screws Install the pre-installed screws in the correct positions. firmly to secure the connector bracket. Installing the screws in incorrect positions will cause the display to rotate diagonally when you swivel it. When adjusting to swivel +15°: Correct position Incorrect position...
- Page 20 Slide the connector bracket to the left or Turn the unit over, tighten the 1 screw firmly right to decide the appropriate position. to secure the connector bracket. Adjustable width: within 25 mm (1 in) (), in 5 steps, in 12.5 mm (1/2 in) pitch (). Note Be sure to tighten the screws on the top side first, then tighten the screw on the bottom side.
- Page 21 Slide the joint cover out to protect the Attaching the display to the unit mounting base of the display, then tighten the fixing screw to secure the cover. Be careful not to pinch your fingers or scratch the center cluster panel of your car when attaching the display to the unit.
- Page 22 If the fuse blows, check the power connection and replace the fuse. If the fuse blows again after replacement, there may be an internal malfunction. In such a case, consult your nearest Sony dealer.
- Page 23 OPEN and “applets” incorporated into the SOFTWARE) is SOURCE COMPONENTS included in the SOFTWARE owned by SONY or one or more of the THIRD- from time to time, and the applicable terms and PARTY SUPPLIERS.
- Page 24 Open Source Components require EXPORT AND OTHER REGULATIONS SONY to make an offer to provide source code in You agree to comply with all applicable export and connection with the SOFTWARE, such offer is re-export restrictions and regulations of the area or hereby made.
- Page 25 SONY AND EACH OF THE THIRD-PARTY SUPPLIERS violation of and/or to enforce this EULA, including, (for purposes of this Section, SONY and each of the but not limited to, immediate termination of your THIRD-PARTY SUPPLIERS shall be collectively use of the SOFTWARE, if SONY believes in its sole referred to as “SONY”) SHALL NOT BE LIABLE FOR...
-
Page 26: Notice On License
This offer is valid to anyone in receipt of this information. Please note that Sony cannot answer or respond to any inquiries regarding the content of the source code. - Page 28 ©2023 Sony Corporation Printed in Thailand https://www.sony.net/...