Home Accents Holiday 23PG90087 Quick Start Manual page 2

TM
Tree top
100S
50S
100S
Section 2
100S
100S
100S
50S
Section 1
100S
100S
Operation
Turning on the tree
Step 1. Connect the light strings of the tree together and plug
the adapter into a wall outlet.
Step 2. If the tree comes with a foot pedal, step on the On/Off
button.
Maintenance
Spare parts
This tree package includes hinge pins & washers for any
replacement or repair that you need to perform on your tree.
If extra parts are needed, contact the Customer Service Team
at 1-855-HDHoliday (1-855-434-6543) from 8am to 7pm EST,
Monday through Friday, and 9am to 6pm EST, Saturday.
Repairing Loose Hinges
Step 1. Place the branch into the slot of the bracket
Step 2. Insert a new hinge pin through the holes of the bracket
and secure with a washer.
Use and Care Instructions
1. Before using or reusing, inspect product carefully. Discard any
products that have cut, damaged or frayed wire insulation or
cords, cracks in the lampholders or enclosures, loose connections,
or exposed copper wire.
2. Before disassembling the tree, unplug the tree and remove all
ornaments and decorations.
3. Gently lift the tree top straight up to remove from the center
section and fold all branches towards the pole.
4. Repeat this step for the center and bottom tree sections.
Do Not Tamper
Internal Parts
Open the
cap cover
Align both arrows
in a straight line
before sliding
down to insert
Adapter
To Be Plugged
Into Wall
Outlet
Foot Pedal
on/off Switch
5. When storing the product, carefully remove the product from
wherever it is placed, including tree, branches, or bushes,
to avoid anyundue strain or stress on the product conductors,
connections, and wires. Cover the
protective cap on the poles to avoid
damaging the internal parts.
6. When not in use, store neatly in a cool,
dry location protected from sunlight.
CAUTION:
1. To reduce the risk of fire and electric shock:
a) Use only the power supply that was provided with this
product. Using a different adapter will damage the lights
and may cause fire, or electrical shock hazards.
b) Do not install on trees having needles, leaves or branch
coverings of metal or materials which look like metal.
c) Do not mount or support strings in a manner that can cut
or damage wire insulation.
2. Use of ladder to set up tall trees:
Ensure the ladder is securely fixed and is not slippery.
Be cautious when climbing up and down the ladder.
Troubleshooting
Problem Solution
Ensure that all tree sections are plugged into
each other and that the tree is plugged into
The tree does not
the wall. If your tree came with a foot pedal,
light
step on the On/Off button.
Section Out? No Lights Working?
Ensure pole is fully connected Check For Loose Connection
Tree Topper? Branch Hanging Low?
Bend up
Run Extension
Cord
Christmas Tree
Model: 23PG90087
Sku # 1009 537 790
Not Full?
Spread Branches
Other Issue?
1-855-HDHoliday
(1-855-434-6543)