Poly P009 Manual

SAFETY AND REGULATORY NOTICES
Poly Studio USB Video Bar
This document covers Poly Studio (Regulatory Model P009).
Service Agreements
Contact your Poly Authorized Reseller for information about service agreements applicable to your
product.
Safety, Compliance, and Disposal Information
This equipment is intended for indoor use only.
●
Always disconnect the system from power before cleaning or servicing.
●
In order to remove all power from this unit, disconnect the power supply mains cord.
●
Do not spray liquids directly onto the system when cleaning. Always apply the liquid first to a
●
static-free cloth.
Do not immerse the system in any liquids or place any liquids on it.
●
Do not disassemble this system. To maintain the warranty on the system, a qualified
●
technician must perform service or repair work.
There are no user serviceable parts inside this product.
●
This product is intended to be powered by an external (LPS) power supply - use only the type
●
which is supplied with this product.
Do not use a power cord that is damaged. This could cause fire or electric shock. Contact the
●
manufacturer for a replacement cord, if necessary.
Only use a power cord which is appropriately rated and approved relevant to the country of
●
use.
This equipment is not intended to be operated by children.
●
When connecting to the mains supply, connect only to an earthed supply outlet which is
●
installed near the equipment and is easily accessible.
Keep ventilation openings free from any obstructions.
●
The ambient operating temperature rating of this equipment is 0 - 40ºC and should not be
●
exceeded.
Always disconnect the system from power and telecommunications networks before cleaning
●
or servicing.
This product is intended to be powered by an external Limited Power Source (LPS) power
●
supply. Use only the type which is supplied with this product.
2.1.0 | November 2023 | 3725-62126-004A
1