Dell OptiPlex 7040-Small Form Factor Owner's Manual page 39

Table 7. System configuration (continued)
Option
USB PowerShare
Audio
Miscellaneous Devices
Table 8. Video
Option
Primary Display
Table 9. Security
Option
Admin Password
System Password
Internal HDD-0 Password
Internal HDD-0 Password
Strong Password
Password Configuration
Password Bypass
Password Change
TPM 1.2 Security
Description
This option allows you to charge the external devices, such as mobile phones, music player.
This option is disabled by default.
Allows you to enable or disable the integrated audio controller.
● Enable Microphone
● Enable Internal Speaker
Both the options are enabled by default.
Allows you to enable or disable the various on-board devices.
● Enable PCI Slot
● Enable Media Card (default option)
● Disable Media Card
.
Description
Allows you to select the primary display when multiple controllers are available in the system.
● Auto
● Intel HD Graphics
NOTE: If you do not select Auto, the on-board graphics device will be present and
enabled.
Description
Allows you to set, change, and delete the admin password.
Allows you to set, change, and delete the system password.
Allows you to set, change, and delete the computer's internal HDD.
Allows you to set, change, and delete the computer's internal HDD.
This option lets you enable or disable strong passwords for the system.
Allows you to control the minimum and maximum number of characters allowed for a
administrative password and the system password.
This option lets you bypass the System (Boot) Password and the internal HDD password
prompts during a system restart.
● Disabled — Always prompt for the system and internal HDD password when they are set.
This option is disabled by default.
● Reboot Bypass — Bypass the password prompts on Restarts (warm boots).
NOTE: The system will always prompt for the system and internal HDD passwords when
powered on from the off state (a cold boot). Also, the system will always prompt for
passwords on any module bay HDDs that may be present.
This option lets you determine whether changes to the System and Hard Disk passwords are
permitted when an administrator password is set.
Allow Non-Admin Password Changes - This option is enabled by default.
Allows you to control whether the Trusted Platform Module (TPM) is visible to the operating
system.
● TPM On (default)
● Clear
● PPI Bypass for Enable Commands
● PPI Bypass for Disable Commands
System Setup 39