Advertisement
Quick Links
6' MULTIFUNCTION UNIT
MODEL: MFSET6.5R23
USERS MANUAL
& SAFETY GUIDE
Thoroughly read this manual
before assembling or using
scaffolding unit. Failure to do
so can result in injury or death.
Seriously...read it.
One Year Warranty
This product is guaranteed for one year
against flaws in materials and craftsmanship
CONFORMANCE TO 29 CFR PT. 1926
MEETS CODE A10.8
CONFORMITY TO CSA STANDARD
Advertisement
Related Manuals for ScaffoldMart MFSET6.5R23
Summary of Contents for ScaffoldMart MFSET6.5R23
- Page 1 6’ MULTIFUNCTION UNIT MODEL: MFSET6.5R23 USERS MANUAL & SAFETY GUIDE Thoroughly read this manual before assembling or using scaffolding unit. Failure to do so can result in injury or death. Seriously...read it. One Year Warranty This product is guaranteed for one year against flaws in materials and craftsmanship CONFORMANCE TO 29 CFR PT.
- Page 2 ` To maintain warranty, use only ScaffoldMart parts with this unit. before climbing or standing on scaffolding. ` Only use ScaffoldMart jacks to adjust height of leg of frame. Never attach any ` Do not use any scaffolding component that is damaged or if parts are missing.
- Page 3 Do Not Over Encumber This unit was designed for a maximum load capacity of 1,000 lb (453 kg). Weight capacity DECREASES above 71 in platform height. Exceeding 71” ` On any side of work platform where a fall of 72” or greater may occur, guardrails ` Never use if walkboard is compromised.
- Page 4 Part Number 3-4 Guardrail MFGRSET3/4 System Stability Kit MFSTABKIT Work Smart MFTSHELF Tool Shelf SPAN PINS Ideal-Angle 18” CASTER Outrigger MFOUTR18A (Set of 4) WHEELS REPLACEMENT PARTS Triple-Lock Kit MFLOCK Span Pins MF381SPANPL SIDERAILS Caster Wheel MF378-5 CONTACT US 1-866-900-0983 customerservice@scaffoldmart.com...
- Page 5 ASSEMBLY FOR NORMAL CONFIGURATION IMPORTANT: Before adjusting height of scaffold, walkboard must be removed to prevent damage to dowels or pull handles. Do not use unit if u-lock assemblies Take inventory of box contents. Make certain all listed contents are are damaged in any way.
- Page 6 ASSEMBLY FOR INVERTED CONFIGURATION REMOVING THE TRIPLE-LOCKING MECHANISM Our 6’ multifunction unit’s siderails can be inverted to allow for a lower minimum setting. To accomplish this, the triple-locking mechanism must also be inverted. First remove the triple-locking mechanism. Begin by turning the lock so its dowel pins are parallel with the slots in the rail, so they don’t impede removal.
- Page 7 79” EXTENDED HEIGHT CONFIGURATION REQUIRED IF PLATFORM EXCEEDS 71” Apply the siderails at the two highest adjustment holes in the end frames. Follow the same procedure as normal installation. Pull handles, apply bracket, then release handles to allow dowels to penetrate the siderail and end frame.
- Page 8 Contact Us: If you have any questions, please call our friendly and knowledgeable staff. Or browse our website, we update it daily with good information about our products and the industry in general. Sales Office: 1705 South Evans St. | Greenville, NC 27834 | Warehouse Address: 1002 North Pitt St. | Greenville, NC 27834 Phone: (866) 900-0983 | Fax: (252) 756-3849...
Need help?
Do you have a question about the MFSET6.5R23 and is the answer not in the manual?
Questions and answers