Table of Contents
Advertisement
Syntax
[SOURce[1|2]]:BPSKey:DATA [01|10|PN15|PN21]
[SOURce[1|2]]:BPSKey:DATA?
Arguments
01 means that the carrier waveform is modulated with 01 pattern.
10 means that the carrier waveform is modulated with 10 pattern.
PN15 means that the carrier waveform is modulated with PN15 pattern.
PN21 means that the carrier waveform is modulated with PN21 pattern.
Returns
01|10|PN15|PN21
Examples
SOURce1:BPSKey:DATA 01
sets the CH1 source of BPSK modulating signal to 01 pattern.
[SOURce[1|2]]:BPSKey:INTernal:RATE
This command sets or queries the internal modulation rate of BPSK modulation for the
specified channel.
Syntax
[SOURce[1|2]]:BPSKey:INTernal:RATE {<rate>|MINimum|MAXimum}
[SOURce[1|2]]:BPSKey:INTernal:RATE? {MINimum|MAXimum}
Arguments
<rate>::=<NRf>[<units>]
where:
<NRf> is the modulation rate.
<units>::=[Hz|kHz|MHz]
Returns
<rate>
Examples
SOURce1:BPSKey:INTernal:RATE 50Hz
sets the CH1 internal BPSK modulation rate to 50 Hz.
16
Advertisement
Table of Contents
