Dreo Atom 316 - Portable Space Heater Manual

Table of Contents

Contents

1 KNOWING YOUR HEATER
2 CLEANING AND MAINTENANCE
- 2.1 Cleaning and Maintenance
3 TROUBLESHOOTING
4 DREO CUSTOMER CARE
5 IMPORTANT SAFETY lNSTRUCTlONS
6 Documents / Resources
- 6.1 References
- 6.2 Download manual

KNOWING YOUR HEATER

Specifications

Model	DR-HSH006 DR-HSH006A
Power	1500W
Input	120V~60Hz

Package Contents

Control Panel

Power On/Off

Touch to turn the heater on or off.
warning Note:

When the heater is plugged into the electric outlet, the power indicator will light in red.
Once turned off, a 30-second countdown will show up on the display as the fan will continue to run for 30 seconds to blow out the remaining heat.

Mode Settings

Touch to switch between → ECO → .

Power heater with thee heating levels: H1(100W), H2(1300W), H3 (1500W).

The heater will automatically select its optimal heating power, depending on the difference between the set temperature (41-95°F) and ambient temperature.
warning Note:

When the ambient temperature reaches the set temperature, the heater will turn off automatically in 30 seconds.
When the ambient temperature drops below the set temperature, the heater will operate on low or high power (1000W or 1500W), depending on the difference between the two temperatures.

Fan only.

Mute/Unmute
To turn on/off the button sounds, long press the Mode button on the panel for 3s.

Auto-Off Timer

When the heater is on, touch to set a timer (0-12h). After the timer ends, the heater will turn off automatically.
To cancel, set the timer to 0 hour.

Heat Level / Temperature

In Power Heat mode, touch or to adjust the heating level.
In ECO made, touch or to adjust the set temperature.

warning Note:

In ECO mode, the heater will turn off automatically when the set temperature has been reached. If your heater turns off frequently, please raise the set temperature, or switch to Power Heat mode.

Child Lock

Long press and for 3s to activate/deactivate the Child Lock function when activated, the display will show 'LC', and all the buttons on the space heater will be locked.

LED Display

More Features

More Features
Display auto turns off after 1 minute.

Memory Function
The heater will remember its last settings (temperatures, working modes, oscillation status) once turned an again.

24-Hour Auto Off
This feature is not ON, by default.

When this feature is ON, the heater will shut off automatically after continuously running tor 24 hours.

Long press the timer for 3 seconds to turn this feature ON/OFF when this heater is on standby. The display will show "ON" and "OF" respectively.

Tip-Over protection
When the heater is tipped over, it will shut off automatically with the error code "P4" on the display.

Overheat Protection
When the heater overheats, it will shut off automatically with the error code "FF" of the display.

CLEANING AND MAINTENANCE

Cleaning and Maintenance

Always turn off and unplug before cleaning.

Outer Surface
Use a soft, dry cloth to gently wipe clean the outer surface.

Air Inlet
Use a soft, dry cloth or a cotton-tipped swab to remove any dust from the air inlet.

warning ATTENTION warning

DO NOT unscrew the unit.	DO NOT use cleaning agents.	DO NOT use abrasive scrubbers.
	Fire or electrical shock hazard. DO NOT immerse the main unit in water. NEVER allow water to get Inside the heater.
	Except for cleaning, any servicing should be performed by an authorized service representative.
	Store in a cool, dry area and keep the cable out af high-traffic areas to avoid tripping hazards.

TROUBLESHOOTING

Problem	Possible Causes	Solution
Malfunction codes on LED display	E2 - Temperature sensor short circuit	Unplug it from the power source and contact Customer Support.
	E1 - Temperature sensor open circuit	Unplug it from the power source and contact Customer Support.
	FF - Overheat Protection	Unplug and wait for it to cool down before plugging in again.
	P4 - Tip-Over Protection	Place the heater back on a flat, level and stable surface.
Heater does not start	Power cord is not properly plugged in.	Connect the plug to a powered electrical outlet.
	Overheat protection has been activated.	Unplug and allow it to cool.
	Overheat protection has been activated.	Remove any objects on or near the heater.
Heater does not start	NO power is passing through the unit.	Ensure that your circuit breaker or fuse is working properly.
	NO power is passing through the unit.	Ensure that your heater is placed on a flat and even surface.
	The set temperature is lower than the ambient temperature.	Ensure that the temperature is set to be higher than the ambient temperature.
The heater suddenly stops during heating.	The temperature exceeds the threshold of the thermal cutoff.	Turn off and unplug the unit. Allow it to coal and plug into the electrical outlet again.
	The heater is tipped over.	Place it on a flat, level and stable surface.
	In ECO model the heater will turn off automatically when the set temperature has been reached.	This is normal. If your heater turns off frequently, please raise the set temperature, or switch to Power Heat mode.

If your problem is not listed or still persists, contact our Customer Support.

DREO CUSTOMER CARE

(888) 290-1688

support@dreo.com
Mon - Fri, 9:00 am-5:00 pm PST/PDT

www.dreo.com

Extend your warranty by registering your new appliance cn our website https://dreo.com/warranty.

IMPORTANT SAFETY lNSTRUCTlONS

warning When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons and hyperthermia including the following:

In order to avoid overheating, do not cover the heater.
Do not use the fan heater near flammables and combustibles.

GENERAL SAFETY

Read all instructions before using this heater.
This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces.
Use the handle to move this heater.
Extreme caution is necessary when any heater is used by or near children or invalids and whenever the heater is left operating and unattended.
Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater.
The output of this heater may vary and its temperature may become hotenough to burn exposed skin. use of this heater Is not recommended for persons with a high sensitivity to heat or an inability to react to avoid burns.
Do not attempt to modify or repair the product by yourself. Doing so could void the warranty and cause damage or personal injury. Only repair technician may disassemble or repair this product.
Make sure that no pieces of polystyrene or other packaging material have been left between elements ot the appliance. It may be necessary to pass over the appliance with a vacuum cleaner.
If the machine is not working as it should, has received a sharp blow, has been dropped, damaged, left outdoors, or dropped into water, do not use and contact Customer Support.
There may be a trace of smoke or odor when the unit is first operated. This indicates that a drop of oil fell on the heating coil during the manufacturing process, It will quickly evaporate and should not re-occur.

LOCATION SAFETY

Do not use outdoors.
Ensure the heater is on a stable secure surface to eliminate the potential of tipping it over.
Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9 m) from the front of the heater and keep them away from the sides and rear.
A heater has hot and arcing or sparking parts inside. Do not use it in areas where gasoline, paint, or flammable liquids are used or stored.
To prevent a possible fire, do not block air intakes or exhaust in any manner, Do not use on soft surfaces, like a bed, where openings may become blocked.
This heater is not intended for use in bathrooms, laundry areas and similar indoor locations. Never locate heater where it may fall into a bathtub or other water container,

ELECTRICITY SAFETY

Always unplug heater when not in use.
Do not operate any neater with a damaged cord or plug or after the heater malfunctions, has been dropped or damaged in any manner. Discard heater, or return to authorized service facility for examination and/or repair.
Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Do not route cord under furniture or appliances. Arrange cord away from traffic area and where it will not be tripped over.
To disconnect heater, turn controls to off, then remove plug from outlet.
Always plug heaters directly into a wall autlet/receptacle.
Never use with an extension cord or relocatable power tap (outlet/power strip).
If there is a loose fit between the plug and the socket or the plug becomes very hot, the socket may need to be replaced. Check with a qualified electrician to replace the socket.
It is normal for the plug and cord to feel warm to the touch.
A plug or cord which becomes hot to the touch or becomes distorted in shape may be result of e worn electrical outlet. Warn cutlets or receptacles Should be replaced prior to further use Of the heater. Plugging the heater into a worn outlet / receptacle may result in overheating of the power cord or fire.
This appliance has a polarized plug (one prong is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only ane way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to rig this safety feature.
Hyperthermia can result in death. Symptoms of hyperthermia include high body temperature, headache, nausea, vomiting, tiredness, dizziness, fainting, and rapid pulse. If you begin to experience symptoms related to hyperthermia, turn off the heater and seek medical attention.
To avoid excessive room temperatures which can cause hyperthermia: DO NOT leave product running unattended In a confined space around infants, or individuals with reduced physical sensory, or mental capabilities.
Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons.
High temperature, keep electrical cords, drapery, and other furnishings at least 3 feet (0.9 m) from the front of the heater and away from the side and rear.
Risk of Hyperthermia.

Risk of Heat Stroke (Hyperthermia)
Hyperthermia can result in death in infants or others use caution to avoid overheating individuals
Read and follow all instructions before use

FOR HOUSEHOLD USE ONLY
READ AND SAVE THESE INSTRUCTIONS

HOT SURFACE
THE FRONT SURFACE CAN BE VERY HOT DURING USE.
DO NOT TOUCH WHEN IN USE.