Advertisement
ADJUSTING THE PRESENT TIME
Example: Adjusting the time to Al
The DT-560 clock comes with a second display. This makes it
possible to adjust the time down to the last second in syn-
chronization with the radio, TV or telephone time signal.
household AC outlet.
Household
AC outlet
4
Plug the timer's power cord into the
Power plug
OF
Winks
8
<ARB1018>
When "AM 12:00" or "0:00" winks during use, the present
time, timer ON/OFF set times and sleep time are released.
Set these times again.
Set the present time (hours &
minutes).
@ Set the mode selector to CLOCK ADJUST.
@ Depress the TIME ADJUST-FAST switch until just before
the present time (8:30 AM)and then release the switch.
® Depress the SLOW switch and adjust to 8:35 AM.
B if the present time
is exceeded, depress the SLOW
switch together with the REV switch to reverse the time.
time.
TIME AUST
7
SEC RESET REV
FAST
SLOW
AM fie TIT
i
ee
(
"an
"AM" indicates the morning time and "PM" the after-
noon and evening time. "PM
12:00" is midday while
"AM 12:00" is midnight.
|
Cos
a
of
Advertisement
