Installation Accessories - Miele DA 408 Operating And Installation Instructions

installation accessories
3 protective shields
to prevent scratches to the chimney
during installation,
2 hose clips for securing the
ducting,
t reducing collar
for use with 5" (125 ram) exhaust
ducting,
Telescopic retaining plate
secures the chimney extension (only in
recirculation mode),
Installation kit for recirculafion
mode contains diverter and hose
(optional accessory)
8 large headed screws 5 × 40 mm
for securing the retaining plates and the
canopy,
($8 wall anchors included in the
packaging are not for use in USA / CDN,)
2 M 6 locking nuts for securing the
motor assembly,
2 screws 3.9 × 7.5 mm for securing the
chimney,
t allen wrench
for adjusting the unit height
t Jever for dismantling the chimney
Installation instruction sheet
27