Teltonika TRB140 Quick Start Manual

https://wiki.teltonika-networks.com/view/TRB140_LEDs
TRB140 LEDs
Main Page > TRB Gateways
This page contains information the different types of LEDs and their behaviour on a TRB140 device.
Contents
1 Power LED
2 Ethernet port LEDs
3 Mobile network type LEDs
4 Mobile signal strength indication LEDs
Power LED
The power LED is located on the bottom left corner of the front panel, just under the power
connector.
It indicates whether the device is powered on or not.
LED turned on
LED turned off
Ethernet port LEDs
There are two LEDs located at the top of each Ethernet port.
They provide information on the current states of the Ethernet ports. Each port has two LEDs:
Orange - 10/100 Mbps connection
Green
- 1000 Mbps connection
Below is an explanation on the behaviours of green and orange LEDs.
LED on
LED off
LED blinking
> TRB140 > TRB140 Manual
State
State
> TRB140 LEDs
Device is powered on.
Device is not powered on.
A data connection on the port is operational (cable plugged in, end
device visible, no data is being transferred).
No data connection on the port is operational (no cable, bad cable or end
device not visible for some other reason (such as damaged network
card)).
Connection established and data is being transferred over this port.
Description
Description