Onkyo TX-SR3100 Instruction Manual
  1. Manuals
  2. Brands
  3. Onkyo Manuals
  4. Stereo Receiver
  5. TX-SR3100
  6. Instruction manual

Onkyo TX-SR3100 Instruction Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Instruction Manual
AV RECEIVER
TX-SR3100
TX-SR3100DAB
En

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TX-SR3100 and is the answer not in the manual?

Questions and answers

Mike Dibble
March 17, 2025

Just purchased tx-sr3100 , does it need firmware update?

0
1 comments:
Mr. Anderson
March 17, 2025

Yes, the Onkyo TX-SR3100 may need a firmware update. A review mentions that before updating, there were issues like signal dropouts when using an HDMI connection, but the update corrected these problems. Firmware updates must be installed using a USB drive, as over-the-air updates are not possible for this model.

This answer is automatically generated

0

Related Manuals for Onkyo TX-SR3100

Summary of Contents for Onkyo TX-SR3100

  • Page 1 Instruction Manual AV RECEIVER TX-SR3100 TX-SR3100DAB...
  • Page 2 Table of contents Firmware Update Speaker Installation Speaker Installation Troubleshooting Supplementary Information Features, etc. released in firmware updates Speaker Connections Speaker Connections Reducing the Power Consumption in Standby State When the following functions are enabled, the power consumption in standby state increases. To reduce the power consumption in standby state, check each setting and set the functions to "Off".
  • Page 3 Before starting the procedure Connecting Playback Devices Firmware Update Connections to BD/DVD and GAME with HDMI jacks 29 Update Information of the firmware Connecting an Audio Component Checking the Firmware Version of the Unit Connecting an Integrated Amplifier or Transmitter (ZONE B) Firmware Update Procedure Connecting Antennas...
  • Page 4 Listening To DAB Digital Radio 3. AccuEQ Room Calibration (European models only) Troubleshooting Presetting a Radio Station Before starting the procedure Adjusting the tone When the unit is operating erratically Quick Menu Troubleshooting ZONE B Playback Appendix Connections Playing Back Speaker Layouts and Selectable Listening Modes Playing different audio and video LISTENING MODE buttons and Selectable Listening...
  • Page 5 Before starting the procedure „ What's in the box * This is an online user manual. This is not supplied with the product. „ Note • Connect speakers with an impedance of 4 Ω to 16 Ω. • The power cord must be connected only after all other connections are completed.
  • Page 6 Firmware Update Firmware Update Procedure Disclaimer: The program and accompanying online documentation are furnished to you for use at your own risk. Our company will not be liable and you will have no remedy for damages for Updating can take about 20 minutes. Existing settings are maintained. any claim of any kind whatsoever concerning your use of the program or the Updating via USB accompanying online documentation, regardless of legal theory, and whether...
  • Page 7 Update If an Error Message is Displayed 1. Connect the USB storage device to your PC. If an error occurs, "- Error!" is displayed on the display of the unit. ("" 2. Download the firmware file from the our company's website to your PC and represents an alphanumeric character.) Refer to the following descriptions and unzip.
  • Page 8 Part Names Front Panel H MASTER VOLUME repeatedly. ON/STANDBY button E Input selector buttons: Switches the input to be B MUSIC OPTIMIZER button: Turns on/off the played. Music Optimizer function that improves the F TONE CONTROL button: You can adjust the quality of the compressed audio.
  • Page 9 Front Panel ( →p42) N DIMMER button: Switches the brightness of the display with three levels. It cannot be turned off completely. O Display ( →p10) P SETUP button: You can display advanced setting items on the TV and the display to have a more enjoyable experience with this unit.
  • Page 10 Display A Displays various information of the input signals. input is selected. B Speaker/Channel display: Displays the output E Lights according to the type of input digital audio channel that corresponds to the selected signal and the listening mode. listening mode. F Lights in the following conditions.
  • Page 11 Rear Panel F TUNER AM/FM terminal (North American, Taiwanese, Middle East, Australian and Asian models): Connect the supplied antennas. TUNER DAB/FM terminal (European models) : Connect the supplied antennas. A HDMI OUT jacks: Transmit video signals and with a USB cable ( →p29). The playback audio signals with an HDMI cable connected to function of music files and power supply to a TV.
  • Page 12 Rear Panel G AUDIO IN jacks: Input AV component audio Up to two powered subwoofers can be signals with an analog audio cable. connected. The same signal is output from each H ZONE B LINE OUT jacks: Output audio signals SUBWOOFER PRE OUT jack.
  • Page 13 Remote Controller ON/STANDBY button RETURN/EXIT button: Returns the display to B ZONE A/B button: Selects an audio output the previous state while setting. destination from among "ZONE A", "ZONE B" and "ZONE A+B". ( →p48) C SLEEP button: You can allow the unit to enter standby automatically when the specified time has elapsed.
  • Page 14 Remote Controller MUTE button: Temporarily mutes audio. Press the button again to cancel muting. L TONE buttons: Adjusts the sound quality. ( →p45) M VOLUME buttons N LISTENING MODE buttons: Selects a listening mode ( →p38, p91). O DIMMER button: Switches the brightness of the display with three levels.
  • Page 15 Inputting Characters You can input characters or symbols on the keyboard displayed on the TV • Select "A/a" to switch between upper and lower cases. (Can also be switched screen such as when naming a preset radio station ( →p65). with the MODE button on the remote controller.) 1.
  • Page 16 Speaker Installation Setting Up the Speakers How the speakers are set up depends on the size and shape of the room, so here we introduce just a basic layout example. The alphabetic symbols used in this chapter represent the following speakers: Front speaker Left Front speaker Right Center speaker...
  • Page 17 Speaker Installation „ 3.1 Channel System „ 5.1 Channel System A 3.1 Channel System that combines front speakers with a center speaker and a This is a basic 5.1 Channel System. subwoofer. a: 22° to 30° a: 22° to 30° b: 120°...
  • Page 18 Speaker Installation „ 3.1.2 Channel System Top Speakers High Speakers a: 65° to 100° 3´(0.9 m) a: 22° to 30° or more TML, TMR Fit top middle speakers on the ceiling directly above the listening position. • Match the lateral distance of the top speakers to the front speakers. FHL, FHR Place the front high speakers directly above the front speakers, Dolby Enabled Speakers angled to face the listening position.
  • Page 19 Speaker Connections (Before starting the procedure) Speakers you can use with this unit and cable connections 4-16 Speaker Connections Connecting the Subwoofer 3.1 Channel System 5.1 Channel System 3.1.2 Channel System 3.1ch 5.1ch 3.1.2ch...
  • Page 20 Speaker Connections Speakers you can use with this unit and cable connections „ Speakers you can use with this unit This unit supports speakers with 4 Ω to 16 Ω impedance. For speaker impedance, check the speaker instruction manual. „ (Note) Speaker Impedance If any of the speakers to be connected has an impedance of 4 Ω...
  • Page 21 Speaker Connections Connecting the Subwoofer Connect a powered subwoofer with this unit using a subwoofer cable. Up to two powered subwoofers can be connected. The same signal is output from each SUBWOOFER PRE OUT jack. 3.1ch 5.1ch 3.1.2ch a Subwoofer cable...
  • Page 22 Speaker Connections „ 3.1 Channel System 3.1ch 5.1ch 3.1.2ch...
  • Page 23 Speaker Connections „ 5.1 Channel System 3.1ch 5.1ch 3.1.2ch...
  • Page 24 Speaker Connections „ 3.1.2 Channel System *1 Connect the Height Speakers you have actually installed (HL/HR: Height Speakers, Top Speakers, Dolby Enabled Speakers). 3.1ch 5.1ch 3.1.2ch...
  • Page 25 Connections Notes regarding connections with HDMI cables Connecting the TV Connecting Playback Devices Connecting an Integrated Amplifier or Transmitter (ZONE B) Connecting Antennas Connecting the Power Cord Connections...
  • Page 26 Connections Notes regarding connections with HDMI cables „ (Note) Placement of cables HDMI (High-Definition Multimedia Interface) is a digital interface standard for connecting TVs, projectors, Blu-ray Disc players, game consoles, and other Putting a load on HDMI cables can lead to poor operational performance. Place video components.
  • Page 27 Connections Connecting the TV By connecting a TV to this unit, you can show the video from AV devices connected to this unit on the TV and also play the sound from the TV through this unit. To ARC/eARC TV Be sure to insert the HDMI cable all the way in.
  • Page 28 Connections • Settings are required when 8K high-quality video is to be played. Refer to "HDMI 4K/8K Signal Format" ( →p55) for information on the settings. Also, use an HDMI cable that supports 8K video.
  • Page 29 Connections Connecting Playback Devices Connections to BD/DVD and GAME with HDMI jacks This is a connection example of an AV component equipped with an HDMI jack. Be sure to insert the HDMI When connecting with an AV component that conforms to the CEC (Consumer cable all the way in.
  • Page 30 Connections Connecting an Audio Component This is a connection example of an audio component. Connect a CD player using a digital coaxial cable or analog audio cable. a Digital coaxial cable, b Analog audio cable...
  • Page 31 Connections Connecting an Integrated Amplifier or Transmitter (ZONE B) By connecting an Integrated Amplifier to the ZONE B LINE OUT terminal, you can play the same source in the other place (ZONE B) as in the main room. Also, when you connect a transmitter for wireless headphones or wireless speakers, you can play audio through these devices.
  • Page 32 Connections Connecting Antennas North American, Taiwanese, Middle East, Australian and Asian models FM-A: North American and Connect the antenna to this unit, and set up the antenna at the best position for Taiwanese models listening while receiving radio signals. Attach the indoor FM antenna to the wall using push pins or adhesive tape.
  • Page 33 Connections Connecting the Power Cord Connect the power cord after all the connections are completed. a Power cord...
  • Page 34 Playback Basic Operations Basic Operations Listening Mode BLUETOOTH Playback ® Listening To the Radio Adjusting the tone Quick Menu Convenience functions Playback ZONE B Playback Playing different audio and video...
  • Page 35 Playback Basic Operations Turning the power on Selecting a source to play 1. Press ON/STANDBY on the remote controller to turn on the power of the 1. Press an input selector button on the remote controller to select a source. unit.
  • Page 36 Playback Adjusting the volume Using the linking function (HDMI CEC) 1. Press the VOLUME buttons on the remote controller to adjust the volume. By using a HDMI cable and connecting to a TV that is compatible with the To temporarily turn off the sound, press the MUTE button.
  • Page 37 Playback Switching the display Repeatedly pressing the INFORMATION button on the remote controller switches the display of the main unit in the following order. • The content displayed depends on the source, BLUETOOTH, etc., being played. • Depending on the audio signal, "B (Back)" or "W (Wide)" is displayed next to the number of channels of the input format.
  • Page 38 Playback Listening Mode This unit is equipped with a variety of listening modes, and you can select the optimum listening mode for movies, TV, music, and games by pressing STEREO, MOVIE/TV and MUSIC. ( →p91) • For details of the effects of each listening mode, refer to "Listening Mode Effects"...
  • Page 39 If a password is requested, enter "0000". • This unit is displayed as "Onkyo TX-SR3100 XXXXXX". • To connect another BLUETOOTH enabled device, press and hold the INFORMATION button at least 5 seconds, and then perform step 2.
  • Page 40 Playback Listening To the Radio „ Tuning Manually Note that if you tune manually, the reception for FM broadcasts will be monaural rather than stereo, irrespective of the sensitivity of the reception. 1. Press TUNER repeatedly to select either "AM" or "FM". 2.
  • Page 41 Playback „ Frequency step setting (North American, Taiwanese, Middle East, Australian and Asian models) Press SETUP, and using the cursors and ENTER, select "Miscellaneous" - "Tuner" - "AM/FM Frequency Step" (North American and Taiwanese models) or "AM Frequency Step" (Middle East, Australian and Asian models), and then select the frequency step for your area.
  • Page 42 Playback Using RDS 3. When a station is found, the station blinks on the display. Pressing the ENTER button in this state will receive that station. If you don't press the (European, Middle East, Australian and ENTER button, the unit starts to search for another station. •...
  • Page 43 Playback Listening To DAB Digital Radio „ Changing the order stations are displayed You can sort the available stations alphabetically or by multiplex. (European models only) 1. Press MODE repeatedly to set the method for sorting the display order from the following.
  • Page 44 Playback Presetting a Radio Station „ Selecting a Preset Radio Station 1. Press TUNER. „ Registration Procedure 2. Press the cursors LEFT/RIGHT to select a preset number. „ Deleting a Preset Radio Station You can preset up to 40(*) of your favorite radio stations. (*) North American, Taiwanese, Middle East, Australian and Asian models: AM 1.
  • Page 45 Playback Adjusting the tone Adjusting the TREBLE/BASS You can adjust the sound quality of the front speakers. 1. Press TREBLE or BASS to select the content to adjust. TREBLE: Enhances or moderates the high-tone range of the front speakers. BASS: Enhances or moderates the low-tone range of the front speakers. 2.
  • Page 46 Playback Quick Menu „ HDMI You can quickly set convenient features such as adjusting sound quality. A/V Sync: If the video is behind the audio, you can delay the audio to offset the Quick Menu BD/DVD gap. The setting can be set for each input. •...
  • Page 47 Playback „ Room EQ Stereo Assign: This function enables you to select a pair of speakers to output stereo sound. Apart from the front speakers (Front), you can select the Surround AccuEQ: Enable or disable the equalizer function that corrects for sound speakers (Surround), Height speakers (Height).
  • Page 48 Playback ZONE B Playback Connections While performing playback in the main room (ZONE A), you can enjoy the audio of the same source in the other place (ZONE B) at the same time. When connecting an Integrated Amplifier or transmitter in the other place (ZONE B) to the ZONE B LINE OUT terminal on this unit.
  • Page 49 Playback Playing Back 1. Press ZONE A/B to select an audio output destination. • ZONE A: Outputs audio only to the main room (ZONE A). "A" on the display of the main unit lights up. • ZONE B: Outputs audio only to the other place (ZONE B). "B" on the display of the main unit lights up.
  • Page 50 Playback Playing different audio and video Displaying Your Favorite Video on TV While Playing Music While listening to the music from a CD or BLUETOOTH enabled device, you can display video on TV from an AV component such as a Blu-ray Disc player. •...
  • Page 51 Playback Setting the video source to be displayed on TV beforehand: When playing the audio of "TUNER" and "BLUETOOTH", you can set the input selector to be displayed on TV beforehand using "Video Select" ( →p67) on the Setup Menu. If a value other than "Last" is set, step 2 in the operation procedure is not required.
  • Page 52 Setup Setup Menu Initial Setup with Auto Start-up Wizard Setup...
  • Page 53 Setup Setup Menu Use the OSD (On-Screen Displays) that appear on the TV to make the settings. Setup Setup Press SETUP on the remote controller to display the Setup menu. Select the item with the cursors UP/DOWN of the remote controller, and press the ENTER button to confirm your selection. 1.
  • Page 54 Setup 4. Source 1. My Input Volume Set a volume value for each input selector. 2. Name Edit Set an easy name for each input. Audio Select Select the prioritized input terminal when multiple audio sources are connected to one input selector.
  • Page 55 Setup 1. Input/Output Assign 1. Input/Output Assign „ 1. TV Out / OSD ‰ HDMI 4K/8K Signal Format Set the 4K/8K signal format input and output by this unit. Set to suit the TV or Make settings for TV output and On-Screen Displays (OSD) that appear on the player connected.
  • Page 56 Setup 1. Input/Output Assign ‰ OSD Language (Default Value: English) ‰ Mini Player OSD (Default Value: Always On) You can display on the TV the images from another input selected last Select the on-screen display language from the following. while playing the audio from BLUETOOTH input. After switching the input to (North American models) BLUETOOTH, play the images and audio.

  • Page 57: Table Of Contents

    Setup 1. Input/Output Assign „ 2. HDMI Input „ 3. Digital Audio Input You can change input assignment between the input selectors and HDMI IN Change input assignment between the input selectors and DIGITAL IN jacks. COAXIAL/OPTICAL jacks. If you do not assign a jack, select "---". ‰...
  • Page 58 Setup 1. Input/Output Assign „ 4. Analog Audio Input Change input assignment between the input selectors and AUDIO IN jacks. If you do not assign a jack, select "---". ‰ BD/DVD (Default Value: ---) GAME (Default Value: ---) CBL/SAT (Default Value: ---) STRM BOX (Default Value: ---) (Default Value: AUDIO 3) (Default Value: AUDIO 2)
  • Page 59 Setup 2. Speaker 2. Speaker „ 1. Configuration ‰ Speaker Impedance (Default Value: 6 ohms or above) Set the impedance (Ω) of the connected speakers. Change the settings of connection environment of the speakers. • For impedance, check the indications on the back of the speakers or their ‰...
  • Page 60 Setup 2. Speaker „ 2. Crossover Center, Height, Surround: Select the crossover frequency from "40 Hz" to "200 Hz" to start outputting Set what number of Hz in the low frequency range is output from each speaker frequencies for each channel. and what should be output from the subwoofer.
  • Page 61 Setup 2. Speaker „ 3. Distance „ 4. Level Calibration Set the distance from each speaker to the listening position. Adjust the volume level of each speaker. ‰ Front Left (Default Value: 12.0 ft/3.60 m) ‰ Front Left (Default Value: 0.0 dB) Center (Default Value: 12.0 ft/3.60 m) Center...
  • Page 62 Setup 2. Speaker „ 5. Dolby Enabled Speaker „ 7. Speaker Combo Change the settings of Dolby Enabled Speakers. "Speaker Combo" is a function that optimizes the crossover value suitable for • This setting can be selected when "Configuration" - "Height Speaker" is set to Klipsch speakers.
  • Page 63 Setup 3. Audio Adjust 3. Audio Adjust „ 1. Multiplex/Mono „ 2. Dolby Change the settings of multiplex audio playback. Change the setting of when Dolby signals are input. ‰ Multiplex Input Channel (Default Value: Main) ‰ Loudness Management (Default Value: On) Set the audio channel or language to be output when playing multiplex audio or When playing Dolby TrueHD, enable the dialog normalization function which multilingual broadcasts, etc.
  • Page 64 Setup 3. Audio Adjust „ 3. DTS „ 5. Volume Change the setting of when DTS signals are input. Change the Volume settings. ‰ DTS Auto Surround (Default Value: On) ‰ Volume Display (Default Value: Absolute) When inputting DTS signals that include extended channel information, the Switch the volume display between the absolute value and relative value.
  • Page 65 Setup 4. Source 4. Source „ 1. My Input Volume • This cannot be set if the "BLUETOOTH" input is selected. Set a volume value for each input selector. ‰ My Input Volume (Default Value: Last) Select a value from "Last", "Min", "0.5" to "81.5" and "Max". (When "Volume Display"...

  • Page 66: Game (Default Value: Hdmi 2 (Hdcp 2.3))

    Setup 4. Source „ Audio Select Analog When giving priority to the input signal from AUDIO IN jacks • This item can be selected only when the input to be set is Select the priority for input selection when multiple audio sources are connected assigned to the AUDIO IN jack in the "Input/Output Assign"...

  • Page 67: Pc (Default Value

    Setup 4. Source „ Video Select When the "TUNER" or "BLUETOOTH" input is selected, you can set the input from which video is displayed on the TV. ‰ Video Select (Default Value: Last) Last Select the video input played immediately prior. BD/DVD, Play the video of each input.
  • Page 68 Setup 5. Hardware 5. Hardware „ 1. HDMI ‰ HDMI Standby Through (Default Value: Auto (Eco)) When this is set to anything other than "Off", you can play the video and audio of Change the settings of the HDMI function. an HDMI-connected player on the TV even if the unit is in standby mode.
  • Page 69 Setup 5. Hardware ‰ Audio TV Out (Default Value: Auto) ‰ Audio Return Channel (eARC supported) (Default Value: On) You can enjoy audio through the speakers of the TV while this unit is on. You can enjoy the sound of an HDMI-connected ARC-compatible TV or eARC- •...
  • Page 70 Setup 5. Hardware „ 2. Bluetooth ‰ Pairing Information (Default Value: -) You can initialize the pairing information stored on this unit. If you are no longer Change the settings for the BLUETOOTH function. able to connect with a device you have paired, try doing this. ( →p86) •...
  • Page 71 Setup 5. Hardware „ 3. Power Management ‰ Auto Standby in HDMI Standby Through (Default Value: On/Off) Enable or disable "Auto Standby" while "HDMI Standby Through" is on. Change the settings for the power-save function. • Default values vary depending on the regions. ‰...
  • Page 72 Setup 6. Miscellaneous 6. Miscellaneous „ 1. Tuner ‰ DAB DRC (European models) (Default Value: Off) With the DRC (Dynamic Range Control) setting, you can reduce the dynamic Change the settings for Tuner. range of DAB digital radio so that you can still hear quiet parts even when ‰...
  • Page 73 Setup 6. Miscellaneous „ 2. Firmware Update „ 5. Factory Reset Change the settings for Firmware Update. All the settings are restored to factory defaults. ‰ Version (Default Value: -) ‰ Factory Reset (Default Value: -) The current firmware version is displayed. All the settings are restored to factory defaults.

  • Page 74: Tv (Default Value: Optical)

    Setup Initial Setup with Auto Start-up Wizard Operations When you turn the unit on for the first time after purchase, the Initial Setup screen is automatically displayed on the TV to allow you to make settings TV’s REMOTE required for startup using simple operations following on-screen guidance. Inputs INPUT HDMI 1...
  • Page 75 Setup 1. Speaker Setup • To perform the Initial Setup again after the setting is completed, press SETUP, select "Miscellaneous" - "Initial Setup", and press ENTER. 1. Select the connected speaker configuration and press ENTER. Note that the image on the screen changes each time you select the number of channels in "Speaker Channels".
  • Page 76 Setup 3. AccuEQ Room Calibration crossover frequency, etc., to their optimum. (The test tone is automatically output when 10 seconds has elapsed without any operation.) • When an error message is displayed or when the connected speakers Place the supplied speaker setup microphone at the listening position. The unit cannot be detected, perform re-measurement by selecting "Retry"...
  • Page 77 Troubleshooting Before starting the procedure When the unit is operating erratically Try restarting the unit Resetting the unit (this resets the unit settings to the default) Troubleshooting „ Power Troubleshooting „ Audio „ Listening Modes „ Video „ Linked operation „...
  • Page 78 Troubleshooting Before starting the procedure Problems may be solved by simply turning the power on/off or disconnecting/ connecting the power cord, which is easier than working on the connection, setting and operating procedure. Try the simple measures on both the unit and the connected device.
  • Page 79 Troubleshooting When the unit is operating erratically ‰ Try restarting the unit ‰ Resetting the unit (this resets the unit settings to the default) Restarting this unit may solve the problem. Set the main unit to standby, then after waiting for 5 seconds or more, press and hold the ON/STANDBY button If the restart of the unit does not solve the problem, reset the unit, and restore of the main unit for at least 5 seconds, and then restart the unit.
  • Page 80 Troubleshooting Troubleshooting „ Power ‰ When the power is turned on, "Diagnostic mode" appears on the display of the main unit • The protection circuit function may have operated. If the unit suddenly enters the standby state and "Diagnostic mode" appears on the display of the main unit when the power is turned on again, this function is diagnosing whether or not the main unit is malfunctioning or there is an abnormality with the speaker cable connection.
  • Page 81 Troubleshooting „ Audio • Make sure that the speaker setup microphone is no longer connected. • Confirm that the connection between the output jack on the connected device and the input jack on this unit is correct. • Make sure that none of the connecting cables are bent, twisted, or damaged. •...
  • Page 82 Troubleshooting ‰ The subwoofer produces no sound If the setting of the front speakers is "Full Band", the low range elements will be output from the front speakers instead of from the subwoofer during 2 ch audio input of TV or music. To output the sound from the subwoofer, make one of the following settings. 1.
  • Page 83 Troubleshooting „ Listening Modes • To enjoy digital surround playback in formats such as Dolby Digital, you need to make a connection for audio signals with an HDMI cable, digital coaxial cable or digital optical cable. Also, audio output need to be set to Bitstream output on the connected Blu-ray Disc player, etc. •...
  • Page 84 Troubleshooting „ Video • Confirm that the connection between the output jack on the connected device and the input jack on this unit is correct. • Make sure that none of the connecting cables are bent, twisted, or damaged. • When the TV image is blurry or unclear, the power cord or connection cables of the unit may have interfered. In such a case, keep distance between TV antenna cable and cables of the unit.
  • Page 85 Troubleshooting „ Linked operation ‰ HDMI linked operation does not work with CEC-compliant devices, such as a TV • In the Setup menu of the unit, set "Hardware" - "HDMI" - "HDMI CEC" to "On". ( →p68) • It is also necessary to set HDMI linking on the CEC-compliant device. Check the instruction manual. •...
  • Page 86 Troubleshooting ‰ Cannot connect a BLUETOOTH wireless technology enabled device (PC, smartphone, etc.) to this unit • Initialize the pairing information and perform pairing again. Firstly delete all the pairing information saved on this unit. In the Setup menu, select "Hardware" - "Bluetooth" - "Bluetooth Receiver"- "Pairing Information", then press ENTER while "Clear"...
  • Page 87 Troubleshooting „ Display ‰ The display does not light up • When the Dimmer function is working, the display may go dim. Press the DIMMER button, and change the brightness level of the display. ( →p14) „ Others ‰ Strange noise can be heard from the unit •...
  • Page 88 Appendix Speaker Layouts and Selectable Listening Modes LISTENING MODE buttons and Selectable Listening Modes Input Formats and Selectable Listening Modes Listening Mode Effects Speaker Combinations General Specifications Appendix...
  • Page 89 Appendix Speaker Layouts and Selectable Listening Modes See the following table for selectable listening modes for each speaker layout. Speaker layout (ch) Listening mode 2.1.2 3.1.2 (*1) (*1) (*1) (*2) DD (Dolby Audio - DD) (*1) (*1) (*1) (*1) DD+ (Dolby Audio - DD+) (*1) (*1) (*1)
  • Page 90 Appendix Speaker layout (ch) Listening mode 2.1.2 3.1.2 (*2) DTS-HD DTS:X DTS Neural:X Multich (Multichannel) (*1) (*1) (*1) (*2) (*1) (*1) (*1) (*2) Direct (*1) (*1) (*1) (*1) (*1) Stereo (*3) (*3) (*3) (*3) (*3) Mono (*3) (*3) (*3) (*3) (*3) Mono Music AllCh Stereo...
  • Page 91 Appendix LISTENING MODE buttons and Selectable Listening Modes Refer to the following table for the listening modes that can be selected with each LISTENING MODE button. LISTENING MODE button LISTENING MODE button Listening mode STEREO MOVIE/TV MUSIC Listening mode STEREO MOVIE/TV MUSIC Multich (Multichannel) DD (Dolby Audio - DD)
  • Page 92 Appendix Input Formats and Selectable Listening Modes You can select a variety of listening modes Listening mode Dolby Surr DTHD according to the audio format of the signal to be Direct (Dolby (Dolby (Dolby Audio (Dolby Audio Atmos input. Stereo Audio - Audio - DD) - DD+)
  • Page 93 Appendix Listening mode AllCh T-D (Theater- DTS-HD Orchestra/ Unplugged/ Stereo / DTS (*1) DTS:X Neural:X (Multich Mono Dimensional) (*1) (*1)(*7) Studio-Mix/ TV Logic (*4) Mono Music (*3) PCM) (*1) (*6) Input format (*5) 2-channel signal input Analog / PCM DD / DD+ / DTHD DTS / DTS 96/24 / DTS Express / DTS-HD HR / DTS-HD MSTR (*10) (*11)
  • Page 94 Appendix (*1) A center speaker or surround speakers need to be installed. (*2) If the input source is Blu-ray Disc and the speaker layout is 5.1 ch or less, DD+ cannot be selected. Instead, the listening mode for DD can be selected. (*3) If the input format is any of the following and the number of channels is monaural, this listening mode becomes unavailable.
  • Page 95 Appendix Listening Mode Effects In alphabetical order DD (Dolby Audio - DD) „ „ AllCh Stereo This mode faithfully reproduces the sound design recorded in the Dolby Digital audio format. This mode is ideal for background music. Stereo sound is played through the Dolby Digital is a multi-channel digital format developed by Dolby Laboratories, surround speakers as well as the front speakers, creating a stereo image.
  • Page 96 Appendix „ Direct DTHD (Dolby Audio - TrueHD) „ This listening mode can be selected for all input signals. Processing that affects This mode faithfully reproduces the sound design recorded in the Dolby TrueHD sound quality is shut down, and sound closer to the original is reproduced. The audio format.
  • Page 97 Appendix „ DTS-HD „ Mono This mode faithfully reproduces the sound design recorded in the DTS-HD High In this mode, monaural audio is played from the center speaker at the time Resolution Audio audio format or DTS-HD Master Audio. of inputting an analog signal or PCM signal. If there is no center speaker These audio formats are optional audio format for Blu-ray Discs.
  • Page 98 Appendix „ TV Logic Suitable for TV shows produced in a TV studio. This mode gives clarity to voices by enhancing the entire surround sounds, and creates a realistic acoustic image. „ Unplugged Suitable for acoustic instruments, vocals and jazz. This mode emphasizes the front sound field image, giving the impression of being in front of the stage.
  • Page 99 Appendix Speaker Combinations • Up to two powered subwoofers can be connected in either combination. Speaker Channels FRONT CENTER SURROUND HEIGHT 2.1 ch 3.1 ch 4.1 ch 5.1 ch 2.1.2 ch 3.1.2 ch...
  • Page 100 Appendix General Specifications European, Middle East, Australian and Asian Amplifier Section North American and Taiwanese models models (North American models) With 8 ohm loads, both channels driven, from 20 Hz- 20 kHz; rated 80 watts per channel minimum RMS 5 ch × 135 W at 6 ohms, 1 kHz, 1 ch driven of 1% THD Rated Output Power power, with no more than 0.08% total harmonic (IEC)
  • Page 101 Appendix European, Middle East, Australian and Asian Tuner Section North American and Taiwanese models models FM Tuning Frequency Range 87.5 MHz - 107.9 MHz 87.5 MHz - 108.0 MHz, RDS 50 dB quieting sensitivity (FM MONO) 2.8 μV, 20.2 dBf (IHF, 1 kHz, 100% MOD) (Middle East, Australian and Asian models) AM Tuning Frequency Range 530 kHz - 1710 kHz...
  • Page 102 Appendix European, Middle East, Australian and Asian HDMI North American and Taiwanese models models Input Output Input *1 Output HDMI 1 HDMI 2 HDMI 3 HDMI 4 bandwidth 40Gbps 40Gbps 40Gbps 40Gbps 40Gbps ALLM Gaming-VRR SBTM Uncompressed 8K/60p 8K/60p 8K/60p 8K/60p 8K/60p 4:2:0...
  • Page 103 Appendix Corresponding Frame rate Color space Color depth HDMI IN 1 - 4 input resolutions 24/25/30 Hz YCbCr4:2:2 12 bit (3840x2160p) YCbCr4:4:4/RGB 8 bit 10/12 bit 4K SMPTE 48/50/60 Hz YCbCr4:2:0 8 bit (4096x2160p) 10/12 bit YCbCr4:2:2 12 bit YCbCr4:4:4/RGB 8 bit 10/12 bit 100/120 Hz...
  • Page 104 Appendix European, Middle East, Australian and Asian USB Section North American and Taiwanese models models 1 (Only for supplying power to Streaming media player, 5 V/1.0 A) European, Middle East, Australian and Asian General North American and Taiwanese models models Power Supply AC 120 V, 60 Hz AC 220 - 240 V, 50/60 Hz...
  • Page 105 Appendix European, Middle East, Australian and Asian Audio Outputs North American and Taiwanese models models ZONE B LINE OUT, Analog SUBWOOFER PRE OUT ×2 FRONT L/R, CENTER, Speaker Outputs SURROUND L/R or HEIGHT L/R (North American and Taiwanese models support banana plugs) Phones 1 (ø...
  • Page 106 SN 29404112_EN © Copyright 2023 Onkyo Technology, K.K. All rights reserved. ©2023 Onkyo Technology, K.K. Tous droits de reproduction et de traduction réservés. F2307-0...

This manual is also suitable for:

Tx-sr3100dab

Table of Contents

Save PDF