Sealey WORKSAFE EAR DEFENDERS CAT 3 Manual

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS,
WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT
IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE
WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. INTRODUCTION
Lightweight yet rugged construction offering protection to BS EN 352.1. SNR Rating 27dB. Adjustable swivel cups for optimum comfort
and safety. Fully approved to protect against high noise levels in most working environments.
Notified Body: 2797
Type Examination Certificate Number: CE 699009
Carried Out By: BSI Group Netherlands B.V., John M. Keynesplein 9, 1066 EP Amsterdam, The Netherlands
2. SAFETY
WARNING! Put the ear defenders on before exposing yourself to noise and wear them during the whole noise exposure. Be
‰
warned that failure to adhere to these recommendations will cause the protection afforded by the product to be severely
impaired.
Ensure the ear defenders are fitted, adjusted and maintained in accordance with these instructions.
9
Ensure the ear defenders are worn at all times in noisy surroundings.
9
Ensure the ear defenders are regularly inspected for serviceability. If damaged, replace the product.
9
This product may be adversely affected by certain chemical substances. Further information should be sought from the manufacturer.
9
Ear-muffs and in particular the cushions, may deteriorate with use and should be examined at frequent intervals for cracking and
9
leakage, for example.
The fitting of hygiene covers to the cushions may affect the acoustic performance of the ear-muffs.
9
Ear protection will be reduced if the defenders are not well fitted and not regularly checked.
9
If the recommendations given in the instructions are not followed, protection provided by the ear defenders will be significantly reduced.
9
NOTE: These ear defenders are of universal size range. Ear defenders complying with EN 352-1 are of universal size range Universal
ear-defenders include small, medium and large size and are thus designed to fit the majority of wearers including for those whom
medium size does not fit.
3. ATTENUATION VALUES
Frequency (Hz):
Standard Application (dB):
Standard Deviation (dB):
4. USE
IMPORTANT: protection is only achieved if the hearing protection is worn for the entire duration of time spent in the noisy environment.
4.1. Expand the headband until the protective rings surround the ears and the headband sits firmly on the head.
4.2. Secure the headband so it sits in the centre of the head and lays flat.
5. MAINTENANCE
5.1. CLEANING
Wash with clean water and a household detergent.
9
DO NOT use caustic solutions, acids, solvents or strong mechanical cleaning.
8
5.2. STORAGE
Store in a clean, dry place, between 5-40
9
Avoid direct sunlight.
8
5.3. OBSOLESCENCE
The service life depends on the storage conditions, the degree of wear and the frequency of use in the respective areas of application.
The minimum durability refers to unused articles when stored properly during the whole storage time.
© Jack Sealey Limited
EAR DEFENDERS CAT 3 - STANDARD
406
MODEL NO:
125 250
10.1 17.1 25.8
3 2.2
H = 33dB, M = 24dB, L = 15dB, SNR = 27dB
C, before and after use.
o
Original Language Version
500 1000 2000
29.9 35.4
1.8 2.4
4000 8000
38.9 34.1
2.4 2.2 4.1
406 Issue 1 02/08/23