Table of Contents
Advertisement
Quick Links
https://wiki.teltonika-networks.com/view/RUTX11_Device_Recovery_Options
RUTX11 Device Recovery Options
Main Page
>
RUTX Routers
Contents
1 Summary
2 Default login information
2.1 Devices with random password
3 Factory reset
3.1 Reset Button
3.2 WebUI
3.3 SMS
3.4 Command line
4 Bootloader menu
5 RMA
Summary
This chapter is an overview on various recovery options for a RUTX11 device.
Default login information
Using recovery methods resets the device's configuration to its default state. Therefore, you will
need to use the default authentication info in order to login to the device. The default login
information for RUTX11 is provided below:
Default Address (LAN IP): 192.168.1.1
Default Username: admin
Default Password: admin01 or random generated password*
Devices with random password
* Certain devices or batches of a device may have a generated password out of the box, instead of
admin01. For RUTX11 devices, batch from when unique passwords are used is 45
You can find the batch of your device on the
Factory reset
A factory reset returns the device back to its default factory settings, i.e., it deletes all custom
configurations. Below you will find various methods of performing a factory reset on RUTX11.
Additional note: SIM PIN on the main SIM card is the only user parameter that is kept after a
factory reset.
>
RUTX11
>
RUTX11 Manual
> RUTX11 Device Recovery Options
Product Labels
sticker.
Advertisement
Table of Contents
Related Manuals for Teltonika RUTX11
Summary of Contents for Teltonika RUTX11
- Page 1 A factory reset returns the device back to its default factory settings, i.e., it deletes all custom configurations. Below you will find various methods of performing a factory reset on RUTX11. Additional note: SIM PIN on the main SIM card is the only user parameter that is kept after a...
- Page 2 Reset Button The reset button is located on the front of the device: The reset button has two functions: Reboot the device. If the reset button is pressed for up to 4 seconds, the device will reboot. Start of the reboot will be indicated by the flashing of all 5 signal strength LEDs together with the green connection status LED.
- Page 3 If you agreed to perform a factory reset, next type in reboot and press "Enter". The router will be reset to it's factory settings and rebooted. The entire sequence of events should look like this: root@Teltonika-RUTX11:~# firstboot This will erase all settings and remove any installed packages. Are you sure?
- Page 4 If conventional recovery methods do not help, you may need to send the device to warranty for repair. The warranty process is described here.
Need help?
Do you have a question about the RUTX11 and is the answer not in the manual?
Questions and answers