Sony BRAVIA KDS-50A3000 Operating Instructions Manual page 39

Speakers TV Speakers Select to nse the TV speakers for audio.
Audio
System
Select this option if you wish to use an external audio system for the
TV sound. By selecting this option you are disabling the TV speakers.
Audio Out Fixed
Select to fix the audio output and allow you to adjust the volume with
Ea_D control qf_olume your audio system's remote control. (The TV's remote control's
VOL
acljtlstnzetzt and MUTING buttons have no effect on Audio Out.)
Variable Select to control the Audio Out's vohnne and nmting with your TV's
remote control.
• Alternate Audio
is available only for digital programs. If the program you are watching is also available in other
languages from the audio tracks, and if that language is what you have selected in the Language setting, your TV
will automatically switch to the matching language with the Alternate Audio feature. The Alternate Audio
option may be accessed by pressing OPTIONS on the remote control when alternate audio stream is available from
the broadcaster.
Cable
Auto Program
Add Digital Channels
Show/Hide Channels
On For receiving cable channels via cable TV provider.
Off For nsing an antenna.
• You should rnn Auto
Program
after changing the Cable setting.
Automatically sets up the channel list on the TV for all receivable channels. Channel
scanning will be based on On/Off of Cable setting.
1
Select Auto Program.
2 Select OK to start Auto
Program.
When Auto
Program
is completed, the screen
will display the nnmber of channels found.
3 Press RETURN to exit Auto Program.
• Running Auto
Program
will clear Favorites list.
• If you nm Auto
Program
again, previously scanned channels will be overwritten with
the newly scanned channels.
Select to add digital channels. Be sure to have the Cable option selected appropriately for
the signal source. (Useful for antenna installation)
Allows you to show or hide channels when you surf with the CH +/- button or in the TV
channel list on the XMB_M.
1 Press tl,/tf, to scroll through the channels until you highlight the channel to show or
hide.
2
Press @ to select Shown or Hidden.
To show or hide more channels, repeat steps 1-2.
• Hidden channels can be accessed by entering the channel number with 0-9 buttons on
the remote control.
(Continued)
39