Table of Contents
Advertisement
-ze-
48
Storing the Effects in the Program Memory
Using the START MEMORY Button
Use the START MEMORY button to store the setting ofthe
<igital SEG that you use Frequently. tf you store the image to
be switched from, the images will be switched by the
program memory as you intended.
Example
'You connect a VTR to the INPUT 1 jacks and a camcorder to
the INPUT 3 jacks. The images switch from LINE A to LINE
B.
+ Select the signal 1 for the LINE A image.
" S e l e c t
the signal 3 FRONT for the LINE B image.
+ Select the LINE A image postion.
1 Make the setting or combination of effects.
Press SET to turn it on.
'The program number and START MEMORY
butions which have a program light up.
Press START MEMORY.
'The START MEMORY flashes,
a
8888
[a
Ses
zm,
B2] | (ex)
50
FEpal|se3)
Press SET.
'The buttons tum off and the setting or combination
you made is stored in START MEMORY.
Hint for Using the Program Memories
'You can make the program memory 2 adding @ combination
of etfects to the program memory 1. In this way, you may
accumulate the effects to make the other program memories.
Example of the program memories
Program memory 1
SHE wine + sigtaloecs
Combination
Program memory 2
Kae
Program memory 3
White balance adjustment
stored in ANV ADJ. MEMORY A
Botore you make program memories, store the inital
Condition or the condition of a trequently used setting in the
START MEMORY bution. inthe above example, the image
'may look unnatural because you adjust the white balance for
the program memory 3.
'Make the combination of the effects for
program memory 1.
to be continued
49
Advertisement
Table of Contents
