Installing Batteries In The Remote Control; Remote Control Operation Range - JVC LT-24CA120 Instruction Manual

Installing Batteries in the Remote Control

1. Press the catch and lift the battery
cover.
Handling the Batteries
• Improper or incorrect use of batteries may cause
corrosion or battery leakage, which could cause
fire, personal injury or damage to property.
• Only use the battery type indicated in this manual.
• When the batteries are exhausted, the remote will
not function. Replace both batteries at the same
time with new ones.
• Do not install new batteries with used ones and do
not mix different types of batteries.
• Do not dispose of used batteries as domestic
waste. Dispose of them in accordance with local
regulations.

Remote Control Operation Range

The first time you use your remote control, point the remote control
at the TV no more than 5 metres from the remote control sensor on
the TV and within 60° in front of the TV. The operating distance may
vary depending on the brightness of the room. Once the remote
control has connected to the TV via Bluetooth the operating range is
10 meters and you won't need to point it at the TV.
2. Insert two AAA size batteries.
Make sure to match the (+) and
( - ) ends of the batteries with the
(+) and ( - ) ends indicated in the
battery compartment.
Handling the Remote Control
• Take care of your fingernails when you press and
hold the battery release tab.
• Do not drop or cause impact to the remote control.
• Do not spill water or any liquid on the remote
control.
• Do not place the remote control on a wet object.
• Do not place the remote control under direct
sunlight or near sources of excessive heat.
• Remove the battery from the remote control
when not in use for a long period of time, as it
could cause corrosion or battery leakage and may
result in physical injury and/or property damage
including fire.
Preparation
3. Click the battery compartment
back into place.
10M
OK
MENU
TEXT
2
13