7. Appendix; Get The Ip Address; Install Openssh Via Powershell - SunFounder Pironman Manual

7.1 Get the IP address

There are many ways to know the IP address, and two of them are listed as follows.
Checking via the router
If you have permission to log in the router(such as a home network), you can check the addresses assigned to Raspberry
Pi on the admin interface of router.
The default hostname of the Raspberry Pi OS is raspberrypi, and you need to find it. (If you are using ArchLinuxARM
system, please find alarmpi.)
Network Segment Scanning
You can also use network scanning to look up the IP address of Raspberry Pi. You can apply the software, Advanced
IP scanner and so on.
Scan the IP range set, and the name of all connected devices will be displayed. Similarly, the default hostname of the
Raspberry Pi OS is raspberrypi, if you haven't modified it.

7.2 Install OpenSSH via Powershell

When you use ssh <username>@<hostname>.local (or ssh <username>@<IP address>) to connect to your
Raspberry Pi, but the following error message appears.
ssh: The term
script file,
spelling of the name,
and try
correct
It means your computer system is too old and does not have
below to install it manually.
1. Type powershell in the search box of your Windows desktop, right click on the Windows PowerShell, and
select Run as administrator from the menu that appears.
is not
ssh recognized
or
operable program.
or if
a path was included, verify that the path
again.
as
the name of a cmdlet,
Check the
OpenSSH pre-installed, you need to follow the tutorial
CHAPTER
SEVEN

7. APPENDIX

function,␣
is␣
57