Advertisement
Quick Links
Operating
Instructions
QPIONEER stesco cram squaczes
STEREO AMPLIFIER
A-149S0
SD, SD/G
Thank you for buying this Pioneer product.
Please read through these operating instructions so you will know
how to operate your model properly. After you have finished read-
ing the instructions, put them away in a safe place for future refer-
ence.
FM/AM DIGITAL SYNTHESIZER TUNER
X=-109S0
In some
countries or regions, the shape of the power plug and
power outlet may sometimes differ from that shown in the explan-
atory drawings. However, the method of connecting and operating
the unit is the same.
See pp. 13-19.
WARNING:
to prevent FIRE OR SHOCK HAZARD,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
IMPORTANT
NOTICE
{For U.S. and Canadian models]
The serial number for this equipment is located on the rear
panel. Please write this serial number on your enclosed war-
ranty card and keep it in a secure area. This is for your securi-
ty.
[For Canadian model]
CAUTION: to prevent ELECTRIC SHOCK DO NOT
USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD,
RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN
BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
ATTENTION:
pour prevenir LES CHOCS ELEC-
TRIQUES NE PAS UTILISER CETTE FICHE POLARISEE AVEC
UN PROLONGATEUR UNE PRISE DE COURANT OU UNE
AUTRE SORTIE DE COURANT, SAUF SI LES LAMES PEUVENT
ETRE INSEREES A FOND SANS EN LAISSER AUCUNE PARTIE
A DECOUVERT.
LINE VOLTAGE SELECTOR SWITCHES
Only
multi-voltage
models
are
provided
with
these
switches, U.S.A., Canadian, U.K., Australia and Europe
models are not provided with them.
Mains voltages in Saudi Arabia are 127V and 220V only.
Never use this model set to 110V in Saudi Arabia
You will find the line voltage selector switches on the rear
panel. Before your model is shipped from the factory, the
switches are set to the power requirements of the destina-
tion; nevertheless, you should check that they are set prop-
erly before plugging the power cord into the wall custiet. If
the voltage requirements differ, adjust the selector switches
as follows. Before adjusting, disconnect the power cord.
1. Use a medium-size screwdriver:
2. Insert the screwdriver into the groove on the voltage selec-
tor, and adjust so that the tip of the arrow point; to the
voltage value of your area.
PN
Set the voltage selector
for the voltage in your area.
2) avin CoN
e
7
VOLTAGE SELETRON
Medium-sreé
WOv
127V
20V-
m0v
screwdrivir
Q) PIONEER'
The future of sound and vision.
3
Advertisement
