Table of Contents
Advertisement
Quick Links
Operating
Instructions
DIGITAL AUDIO
PD-M502
MULTI-PLAY COMPACT DISC PLAYER
PD-M502/PD-M552
PD-M602/PD-M702
PD-M552
_PD-M602
Hg
tg
ded <teg
DEMO MODE
Demo
mode
allows you to see variations of
the display. To enter the demo mode, press the
POWER switch and then <_<
button with-
Thank you for buying this PIONEER product.
Please read through these operating instructions so you will
know how to operate your model
properly. After you have
finished reading the instructions, put them away in a safe place
for future reference.
In some countries or regions, the shape of the power plug and
power outlet may sometimes differ from that shown in the
explanatory drawings. However, the method of connecting and
operating the unit is the same.
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
IMPORTANT NOTICE
[For U.S. and Canadian models]
The serial number
for this equipment
is located on the rear
panel. Please write this serial number
on your enclosed
warranty card and keep it in a secure area. This is for your
security.
[For Canadian model with the polarized plug]
CAUTION:
TO PREVENT ELECTRIC SHOCK DO NOT
USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD.
RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN
BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
{Pour le modéle canadien avec la fiche polarisée]
ATTENTION:
our prevenir Les cHocs
ELECTRIQUES
NE PAS UTILISER CETTE FICHE POLARISEE
AVEC UN PROLONGATEUR,
UNE PRISE DE COURANT
OU
UNE AUTRE
SORTIE DE COURANT,
SAUF Si LES LAMES
PEUVENT
ETRE INSERESS.A
FOND
SANS
EN LAISSER
AUCUNE PARTIE A DECOUVERT.
in 1 second without inserting the magazine. To
exit demo mode, insert the magazine or press
any button.
LINE VOLTAGE SELECTOR SWITCH
Only multi-voitage models are provided with this switch. U.S.,
Canadian,
European,
U.K., and Australian
models are not
provided with this switch.
Mains voltages in Saudi Arabia are 127V and 220V only.
The line voltage selector switch is located on the rear panel of
this player. Before your player is shipped from the factory, the
switch
is set to the power
requirements
of the player's
destination. Check that it is set properly before plugging the
power cord into the outlet. If the voltage is not properly set or
if you move.to an area where the voltage requirements differ,
adjust the selector switch as follows:
® Be sure to disconnect the power cord from its outlet before
making this adjustment.
e Use a medium-sized (flat blade) screwdriver. Insert the tip of
the screwdriver into the groove of the selector switch and
turn it so that the power voltage marking of your area points
to the arrow.
-
6©®*F
220-240V
110-127V
CAUTION:
Be sure to use the shielded cables when
connecting this equipment to other devices.
"This product complies with the Radio Interference require-
ments of the EC (European Community) Directive 87/308/EEC."
@) PIONEER'
The Art of Entertainment
Advertisement
Table of Contents
