Sophos AP6 420 Mounting Instructions

Flat Ceiling & Plenum Mounting Kit
What is included in the box
Fix-plate (to be fixed to the
rear of the access point)
Mounting Instructions
Flat ceiling mount
1. Place the fix-plate to the rear of the Access Point by using the 4 supplied step-screws. Make sure it's positioned in the right
direction as indicated.
1.
2. Fix the main bracket to a concrete ceiling by using 4 wall anchors and screws or to a ceiling tile by using 4 screws and nuts
(not supplied).
3. Align the Access Point (with fix-plate) via the key holes to the main bracket and push it to the end in the sliding-slot.
2.
Screw hole for
product fixing
Spring lock
Main bracket (to be
fixed to the ceiling)
3.
AP6 420(E)/840(E)
Keyholes
Springs
Screw holes for
ceiling mount
4x M3 step screws
Plenum mount clip plus 2x M4
screws and nuts
(not needed for ceiling mount)